Quark buubibottle User manual

buubibottle
USER GUIDE
SMART PORTABLE MILK WARMER

Contents
Important Safeguards
Bottle Overview
Controls + Operation
Cleaning
Battery + Charging
Materials
Technical Specifications
Warranty
Troubleshooting
02
03
04
06
07
08
09
10
11

Welcome, let’s get started.
In order to get the most out of your BuubiBottle Smart Portable Milk Warmer, please
read this user guide carefully.
The BuubiBottle is designed to safely and evenly warm breast milk and water for
formula to a precise temperature both at home and on-the-go. With USB type-C
charging,up to 10 hours of battery life, durable Tritan
TM exterior, silicone carrying strap
and advanced memory function, the BuubiBottle is built for life with kids.
Weʼre sure youʼll love your new device, but if you have any issues or just need a hand
getting started, feel free to reach out to our helpful support team at quarkbaby.com or
by calling 1-855-HI-QUARK (447-8275).

Important Safeguards
Warning
●Read all instructions carefully before use.
●Close supervision is required when any appliance is used by or near children.
●Do not immerse the bottle in water or other liquid to protect against fire,electrical
shock and personal injury.
●Do not place near heat sources or heat producing devices.
●Do not touch the inside of the bottle when hot and do not run the unit dry.
●Use only the power adaptor supplied with the product for charging.
●Unplug power supply from the wall when not in use and before cleaning.
●Do not microwave the bottle.
●The bottle is interior hand wash only. Follow all cleaning instructions carefully.
●Do not operate the unit with a damaged power adapter, charging cable, or if the
bottle has malfunctioned. Attempting to open or service the unit voids all
warranties and may cause injury to the user. If you experience any problems with
the unit, discontinue use immediately and contact Quark for assistance.
●If any of the instructions provided are not followed, or the supplied equipment is
used in a manner not specified by the manufacturer, the protection provided by
the equipment for fire,electric shock or personal injury may be impaired.
●This product is intended only for consumable, non-carbonated liquids.
●Save these instructions for future reference.

Bottle Overview
The product images in this manual are for reference.
The maximum capacity of the bottle is 300ml/10oz.
LID
LOCKING BUTTON
SILICONE GASKET
SILICONE HANDLE
CONTROLS
USB TYPE C PORT
BOTTLE

Turn power on or off. Press to power on, press again to power off.
POWER ON/OFF
INCREASE TEMPERATUREDECREASE TEMPERATURE
BATTERY INDICATOR
UNIT OF TEMPERATURE
TEMPERATURE DISPLAY
CHECK BATTERY LEVEL
Increase temperature. Press and hold to quick-adjust.
Decrease temperature. Press and hold to quick-adjust.
Check remaining battery percentage. Displays in 20% increments.
Control Panel
Using your BuubiBottle

Once your preferred temperature is set,the display will show the current
temperature in the bottle. When your desired temperature is reached, a tone
will sound and BuubiBottle will keep the liquid warm.
Swirl the bottle regularly during warming. Doing so will ensure the liquid is
heated evenly to avoid hot spots and will prevent separation of fats from breast
milk.
Battery life will vary based on use. Expect up to 10 hours of use if holding a
temperature of 37°C/98°F,or up to 5 separate warming cycles from room
temperature.BuubiBottle will operate when charging for all day use.
BuubiBottle defaults to 37°C/98°F out of the box. Adjust the temperature to
your preference, up to 50°C/122°F. Next time you power on, BuubiBottle will
remember your last used temperature setting.
Always double check the temperature of milk or formula before feeding.
37°C/98°F is the recommended temperature for feeding milk or formula,
although some babies may prefer a few degrees warmer or cooler.
Do not microwave your BuubiBottle. Electronic devices should never be
placed in the microwave. Doing so can cause fire, electric shock and personal
injury.
Do not put your BuubiBottle in the dishwasher. BuubiBottle is interior hand
wash only. Be careful not to immerse the bottle.Liquid can enter the charging
port and damage the unit. Ensure the charging port cover is properly seated
and wipe the bottle exterior with a damp cloth to clean. Always dry well.

Cleaning Instructions
Disconnect the power supply and ensure the bottle is cool before proceeding.
Do not immerse the bottle in water or use corrosive cleaning agents.
Do not clean the bottle with abbraisive cleaning tools.
Keep out of reach of children and pets during sterilization.
It is recommended that you clean the bottle according to these instructions brfore first use
and after each subsequent use.
Minerals in tap water or non-distilled water may cause scaling which can affect performance.
Descale the bottle regularly by filling the liquid reservoir with a 1:1 solution of water and white
vinegar.Let sit for 30 minutes.Dispose of the solution, rinse well, and wash the bottle as
normal to remove any residual odour. Never use a chemical descaling agent.
●
Add a drop of dish soap and 150ml/5oz warm water to the liquid reservoir.
●
Place the included Flex Brush into the reservoir and secure the lid.
●
Shake well for one minute.
●
Empty the reservoir and remove the Flex Brush.Rinse well.
●
To sterilize the bottle,boil water in a kettle. Allow the boil to stop rolling and carefully
fill the liquid reservoir. Do not attach the lid. Discard once the water has cooled.
●
To clean the outside of the bottle, ensure the charging port cover is securely seated
and wipe with a damp cloth.
●
To clean the lid and carry strap,hand wash with warm soapy water or place in the
top rack of dishwasher.
Note: If used to warm coffee,the heating element silicone housing can become stained.

Battery Status Overview
Charging Instructions
Solid white - Battery is fully charged
Flashing white - Battery is charging, above 40%
Solid red - Battery is low
Solid red + “LO” - Battery is critically low.Charging required
Flashing red - Battery is charging,below 40%
If the battery is low, the bottle will continue to work when charging.
Ensure the bottle is off before connecting to power.
It is recommended to fully charge the bottle before first use.
Use the included 5V/2A power adapter to charge the bottle.

Food Contact Materials
This product and materials for food contact are compliant with the requirements
of the GB4806.1-2016 series of standards.
Part Name
Lid
Heating Plate
Silicone Gasket
Bottle
Material
Polypropylene
Stainless steel
Silicone
PCTG copolyester
GB4806.7 - 2016
GB4806.9 - 2016
GB4806.11 - 2016
GB4806.7 - 2016
Note
PP
SUS316
Silicone
Tritan
Execution standard

Product Name: BuubiBottle Smart Portable Milk Warmer
Model: QK-8008
Place of origin: Shanghai, China
Packaging: 1PCS
Capacity: 300ml/10oz
Input power: 5V 2A
Battery capacity: 4400mAh 32. 56Wh
Battery voltage: 7.4V
Operating power: 35W
Recommended room temperature: 15°C ~ 30°C
Recommended humidity: 50% - 80%
Date of manufacture: Marked on the underside of the product
This symbol indicates that your products and/or batteries must be disposed of
separately from household waste in accordance with national laws and
regulations.Disposing of your products and/or their batteries separately for
collection and recycling will help to conserve natural resources and ensure that
recycling is carried out in a manner that protects human health and the
environment.
Technical Specifications

Warranty
For more information on our 1 year limited warranty and to register your product for
our extended warranty, please visit quarkbaby.com/warranty or scan the QR code
below with your mobile device.
Please note: Your original proof of purchase is required in order for our support team
to validate your warranty request.

Troubleshooting
Check if the battery is sufficiently chargedIf the bottle wonʼt turn on
Check if the power cable is properly connectedIf the bottle wonʼt charge
The bottle is empty and will turn off to prevent
damage caused by dry-burning
If the screen is flashing ‘E1ʼ
The smart sensor is indicating a fault and the
bottle will turn off.Contact support
If the screen is flashing ‘E2ʼ
The liquid in the bottle is over 65 °C/150°F.
The bottle will not operate until cool and the
liquid is not suitable for children to drink
If the screen is flashing ‘HHʼ

Designed by Quark in Vancouver
©2022 Quark Baby Ltd. All rights reserved.