QUBINO ZMNHAD1 User manual

USER MANUAL EN.
QUBINO FLUSH 1 RELAY
The Qubino Flush 1 Relay is ideal for remotely controlling one light or electrical device (door
lock, door opener, small appliances, etc.).

EN.
2
Table of contents
About Qubino ........................................................................................................................................................................................................................ 3
Safety Information ................................................................................................................................................................................................................ 5
Flush 1 Relay - Available Frequencies .................................................................................................................................................................................. 6
Where To Buy ........................................................................................................................................................................................................................ 7
1. Introduction....................................................................................................................................................................................................................... 7
2. Use Cases ........................................................................................................................................................................................................................... 9
2.1. Installation examples where Flush 1 Relay is installed behind a wall switch ...................................................................................................... 9
2.2. Installation examples where Flush 1 Relay is installed behind a power socket –for switching device on/off and measuring power
consumption of the connected device ........................................................................................................................................................................ 11
2.3. Installation examples where Flush 1 Relay is installed behind a power socket –for measuring power consumption of the connected device
........................................................................................................................................................................................................................................ 12
2.3. Installation examples where Flush 1 Relay is installed in electrical box............................................................................................................ 13
2.4. Additional features of Flush 1 Relay which can make your life easier............................................................................................................... 14
3. Qubino Flush 1 Relay Advantages and Highlights......................................................................................................................................................... 16
3.1. Advantages............................................................................................................................................................................................................. 16
3.2. Highlights................................................................................................................................................................................................................ 19
4. Package Contents ............................................................................................................................................................................................................ 20
5. Technical Terms for Switches ......................................................................................................................................................................................... 21
6. Compatibility with Z-Wave Gateways (hubs) ................................................................................................................................................................ 23
7. Installation ....................................................................................................................................................................................................................... 24
7.1. Installing the device behind a light switch ........................................................................................................................................................... 25
7.2. Installing the device behind a socket ................................................................................................................................................................... 38
7.3. Installing the Qubino Temperature Sensor.......................................................................................................................................................... 42
8. Device Information and Support.................................................................................................................................................................................... 47
9. Electrical Diagram (110 - 230VAC, 24VDC) .................................................................................................................................................................... 48
10. Adding the device to a Z-Wave network (Inclusion) .................................................................................................................................................. 49
11. Removing the device from a Z-Wave network (Exclusion) ........................................................................................................................................ 50
12. Associations ................................................................................................................................................................................................................... 51
13. Configuration Parameters ............................................................................................................................................................................................ 52
14. Technical Specifications................................................................................................................................................................................................ 61
15. Z-Wave Command Classes ........................................................................................................................................................................................... 63
16. Important Disclaimer .................................................................................................................................................................................................... 68
17. Warning ......................................................................................................................................................................................................................... 68
18. Regulations .................................................................................................................................................................................................................... 68

EN.
3
About Qubino
Qubino is a family of innovative Z-Wave devices, many of them the smallest of their kind.
Numerous breakthrough innovations, 100% quality control, and responsive customer service
make Qubino the number one choice for making your life more comfortable.
Qubino enables you to transform –inexpensively and invisibly –any traditional electric device
into a smart, connected one that you can control with your smart phone. Qubino devices are
simple to install and use, but also extremely versatile - they offer a wealth of additional features
and parameters for you to play with.
We love helping people who enjoy creating new ideas for their home and then using their hard
work and skill to turn those ideas into reality. We admire their passion and resourcefulness. We
do our best to supply you with products that will enable you to create a unique and special home
for yourself. We innovate so that you can be free to make the smartest home possible. With just
a touch of magic.
"Simple is smart." We believe it is smart to make complex things simple. But only when this
means simple for our customers, not for ourselves. We think a lot so that you won't have to when
it comes to installing or using our devices.
For more information visit: www.qubino.com

EN.
4
About Z-Wave:
The Z-Wave protocol is an interoperable, wireless, RF-based communications technology
designed specifically for control, monitoring, and status reading applications in residential and
light commercial environments. Mature, proven, and broadly deployed (with over 50 million
products sold worldwide), Z-Wave is by far the world market leader in wireless control, bringing
affordable, reliable, and easy-to-use 'smart' products to millions of people in every aspect of daily
life.
Source: www.z-wavealliance.org

EN.
5
Safety Information
For Qubino, safety is first, so we have prepared lots of safety tips and information that can be
found throughout this manual.
To ensure your safety, please read this manual carefully before installing the device; follow the
instructions exactly. The manufacturer (GOAP d.o.o. Nova Gorica) shall not be legally responsible
for any equipment damage or personal injury caused by incorrect installation or operation other
than that covered in this manual.
ⓘPlease check the Technical Specifications and Electrical Diagram chapters, as well as fuse
requirements in the Installation chapter before installing the device.

EN.
6
Flush 1 Relay - Available Frequencies
ORDERING CODE
(MODEL NUMBER)
POWER SUPPLY FREQUENCY
Z-WAVE FREQUENCY*
ZMNHAD1
50/60 Hz
868,4 MHz
ZMNHAD2
50/60 Hz
921,4 MHz
ZMNHAD3
50/60 Hz
908,4 MHz
ZMNHAD4
50/60 Hz
869,0 MHz
ZMNHAD5
50/60 Hz
916,0 MHz
ZMNHAD6
50/60 Hz
868,4 MHz
ZMNHAD7
50/60 Hz
919,8 MHz
ZMNHAD8
50/60 Hz
865,2 MHz
ZMNHAD9
50/60 Hz
922,5 MHz
ZMNHADA
50/60 Hz
919,7 –921,7 –923,7 MHz
ZMNHADB
50/60 Hz
868,1 MHz
ZMNHADC
50/60 Hz
868,1 MHz
ZMNHADD
50/60 Hz
919,8 MHz
ZMNHADE
50/60 Hz
920,9 MHz
*You can check the Z-Wave frequency in your country here:
http://z-wave.sigmadesigns.com/wp-content/uploads/Z-Wave_Frequency_Coverage.pdf

EN.
7
Where To Buy
To find your nearest Qubino dealer visit: http://qubino.com/where-to-buy/
1. Introduction
The Flush 1 Relay controls on/off function for one electrical device. It measures power
consumption of the connected device, and can be paired with a digital temperature sensor (sold
separately). It supports push-button/momentary switches and toggle switches (default).
The connection of a digital temperature sensor means you can create complex scenes and control
any device relative to a set temperature range. The Qubino Flush 1 Relay also acts as a Z-Wave
repeater to improve the range and stability of the Z-Wave network.

EN.
8
Flush 1 Relay supported functions:
Turn
ON/OFF
W
Measurement
kWh
Measurement
Temperature
Sensor
Scene 1
Trigger
Scene 2
Trigger
Automatically
turn ON/OFF
Associations
Z-Wave
Repeater
Auto-
inclusion
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓

EN.
9
2. Use Cases
The Flush 1 Relay can be used in many different scenes, which can help make your life more
comfortable. We have prepared a few of them for you so you can get an idea for your next smart
home project. Of course, there are countless of other options for how to use Qubino Flush 1
Relay to remotely control devices via your smartphone.
2.1. Installation examples where Flush 1 Relay is installed behind a wall switch
•Remotely control lights
•Remotely control ceiling fans
•Remotely control wall-mounted fans
•Remotely control domestic hot water
tanks

EN.
10
•Remotely control infrared –heater
•Remotely control wall mounted infrared
heating panel
•Remotely measure room temperature (*The
temperature sensor is sold separately - for
more info, please see Qubino catalogue.
Product ordering code (model number):
ZMNHEA1)
•Remotely trigger different scenes with
two additional inputs (I2, I3) –for
example scene 1: turn on all the lights in
the house, scene 2: turn off all the lights
in the house

EN.
11
2.2. Installation examples where Flush 1 Relay is installed behind a power socket –for
switching device on/off and measuring power consumption of the connected device
•Remotely control an oven connected to a
power socket
•Remotely control an iron connected to a
power socket
•Remotely control a fan connected to a
power socket
•Remotely control floor lights connected
to a power socket

EN.
12
2.3. Installation examples where Flush 1 Relay is installed behind a power socket –for
measuring power consumption of the connected device
•Remotely measure power consumption of
refrigerator connected to a power socket
•Remotely measure power consumption
of microwave oven connected to a power
socket
•Remotely measure power consumption of
television connected to a power socket
•Remotely measure power consumption
of computer connected to a power socket

EN.
13
2.3. Installation examples where Flush 1 Relay is installed in electrical box
•Remotely control 24VDC irrigation sprinkle
valves.
•Remotely control 24VAC or 24VDC
irrigation sprinkle valves.
•Remotely control sanitary hot water
recirculation pumps and remotely
measure temperature of the sanitary hot
water (*The temperature sensor is sold
separately - for more info, check Qubino
catalogue. Product ordering code:
ZMNHEA1)
•Remotely control pool recirculation
pumps
and measure pool water temperature
(*The temperature sensor is sold
separately - for more info, check Qubino
catalogue. Product ordering code:
ZMNHEA1)

EN.
14
2.4. Additional features of Flush 1 Relay which can make your life easier
•Do you worry that your irrigation system
can expose your garden to flooding?
•Sometimes your Z-Wave gateway (hub)
can stop working while you’re away from
home (no internet connection, power
outage, etc). If you have an irrigation
scene scheduled, your gateway (hub)
might not send an OFF command to your
irrigation system, leaving your garden
flooded and water bill more expensive
than you’d like. The Flush 1 Relay offers
the option to set the timing for irrigation
for a specific amount of time internally; it
then automatically stops watering,
completely independent of your
gateway’s (hub’s) commands.
For the 24VDC use case, please check the chapter above.
•Do you often forget to turn off devices
when you leave your home, like lights in
the basement or attic?
•The Flush 1 Relay can automatically turn
devices/lights on or off after a set period
of time (when you’re away from home).
For example, the light will automatically
turn off if it’s been on for 8 hours, let’s
say. This function is independent of
other scenes and gateway (hub)
commands.

EN.
15
•Do you know how much energy you
consume?
•The Flush 1 Relay monitors and reports
energy consumption of connected devices
in real time to your smart home app (your
gateway (hub) needs to support this
feature). Know how much power your light,
domestic water tank, iron, etc, is using.
•Want to control other devices in your
Z-Wave network with the Flush 1
Relay?
•Connect the Flush 1 Relay with other
devices in your network to remotely
and automatically trigger another Z-
Wave device. And have other Z-Wave
devices trigger your Qubino Flush 1
Relay.

EN.
16
3. Qubino Flush 1 Relay Advantages and Highlights
3.1. Advantages
•The Qubino Flush 1 Relay allows the easiest and quickest installation possible. Because
of its small size, it fits smoothly in even the smallest, most shallow and most crowded
flush mounting boxes, which are stuffed with lots of electrical cables and where every
millimetre counts. All this is possible because the Qubino Flush 1 Relay is the smallest Z-
Wave switch in the world.
•The Qubino Flush 1 Relay has the option to connect a temperature sensor*, through
which users can monitor the ambient air or water temperature. It’s the only Z-Wave
switch in the world which offers this option. With a connected sensor, the user can
monitor accurate measurements of the room temperature, pool water temperature, etc.,
and remotely change conditions as desired. Qubino relay, along with the temperature
sensor, is connected directly to the power supply. Install it and forget it –no need to worry
about dying batteries, like with battery-powered sensors.
*The temperature sensor is sold separately - for more info, please see Qubino catalogue.
Product ordering code (model number): ZMNHEA1
ⓘPlease do not put the temperature sensor directly into the water! The temperature sensor
is designed to measure the water temperature by being mounted to the water pipe.

EN.
17
•The Qubino Flush 1 Relay is the only Z-Wave switch in the world that has two additional
inputs (I2, I3), which enable triggering of different scenes. The user does not need to buy
additional devices for setting various scenes. For example:
oSwitch connected to input I2: Welcome Home –turn on all the lights in the house
oSwitch connected to input I3: Leaving Home –turn off all the lights in the house
•Qubino guarantees 100% device quality. Such high quality can be delivered because every
Qubino goes through rigorous quality control standards throughout the production
process. Every device has a unique serial number and a part number, which are assigned
to the device only after it goes through a strict testing procedure.

EN.
18
•By scanning the QR code on the back of your Qubino device, the serial and part numbers
will be automatically copied on your mobile phone; they also provide direct access to
Qubino’s technical support team. The serial and part numbers of your device are given
automatically every time you open an inquiry with our support team: this instantly shares
the relevant device information we need to provide the best technical support possible.
For details, please see the Device Information and Support chapter.
•The Qubino Flush 1 Relay is engineered and manufactured in the EU, and contains only
the highest quality components.
•The Qubino Flush 1 Relay is certified by an independent European Institute and has CE,
FCC, LVD and EMC certificates to ensure the highest safety standards.

EN.
19
3.2. Highlights
•Remote (via smartphone or PC) and local on/off control of bulbs and other electrical
devices
•Works with push-button (momentary switch) and toggle switch or you can install it behind
power sockets
•Capable of measuring the power consumption of the connected device in real time via
smartphone, which allows you to save on electricity bills*
•Features one of the easiest and quickest installations of devices of this kind; fits in even
the smallest flush mounting boxes
•Saves and restores the last status after a power failure
•Supports auto-inclusion mode for quick set up
•Can automatically turn devices on and off after a set period of time (helpful when you’re
away from home, for example) *
•Supports additional parameters for expert users, which allows for advanced
configuration*
•Acts as a signal repeater which improves the range and stability of your Z-Wave network
•Can be used to remotely control and trigger other devices in your Z-Wave network
*Your gateway (hub) needs to support advanced configuration and parameter input if you wish
to use this feature

EN.
20
4. Package Contents
•Flush 1 Relay Device
•Installation Manual