4
5
Header
Fill With
3Assembling
Shelves
• Fold sides of shelf (B) in
along perforated lines
• Place top shelf (B) into
(A), placing the back two
corners on the folded in
tabs of (A)
• Pull tab of (B) through
horizontal slit on back
of (A)
For extra stability, it is
recommended to tape over
the slit and tab once inserted.
• Ensure (B) is sitting on
tabs on back of (A) and
tab is through back of
(A)
• Slide clips (D) into holes
on either side of (A)’s
sides, coinciding with
the shelves
• Slide (B) onto clips
• Place Shelf Pad (C)
onto shelf
• Repeat steps for other
2 shelves
• Once complete, display
should appear as
shown below
• 2-sided header features
photos showcasing
either indoor or outdoor
products - choose side
that corresponds with showcased product
• Slide back of header (C) into top of display (A)
so grooves on lower left and right of (C) sit on
the sides of (A) as shown above
• Congrats! Your display
is ready to be lled
with product
www.quickdams.com | 888-761-4405
THE NEXT GENERATION IN FLOOD PROTECTION TM
