QVC Kringle Express User manual

Kringle Express Illuminated Gem Deer
For indoor/outdoor use
Assembly:
Step 1: Carefully remove Deer from the packaging
Step 2: Place the head onto the neck, lining up with the two holes.
Step 3: Next place the two antlers in the two holes on the head.
Step 4: Screw the coaxle of the plug into the lead cord.
Step 5: Connect the 1 co-axles on the antlers and 1 co-axle on the body. Note the co-axle only goes in
one way so if you are having trouble please reverse.
Step 6: Use the zip ties to secure the head onto the neck and the antlers on to the head.
Step 7: Plug into the outlet. Control function from the plug chosing from one of 4 functions: Steady
Warm White, Steaady Cool White, Slo Glow Warm White, Slo Glo Cool White, Quicker Flaser, Slower
Flasher, Off. All functions have 6 hour timer.
Step 8: Use stakes to secure the deers feet into the ground.

WARNING
• Do not operate this product whilst in packaging.
• Disconnect from main power supply when not in use.
• Do not operate in a confined space or allow to come into contact with any flammable materials.
• Do not allow any part of this set to come into contact with direct heat or flame.
• The transformer is a sealed unit, do not attempt to open or tamper with it.
• There are no user replaceable parts in this set.
• Please keep a free flow of air around the transformer.
• This product is a decoration and not a toy, keep away from babies and young children as well as pets.
Do not put this product in regular domestic waste at end of life. For further advice on disposal of electrical goods
please contact your local authority.
Made in China.
Information provided by Kringle Express