RACK IT UP MPT 12 User manual

IMPORTANT!
We are committed to the highest quality in the manufacture of this RACK IT UP pot rack.
Each product has been carefully inspected before shipment.
However, in case there is a problem, PLEASE LET US HELP YOU FIRST. Do not return the
item to the location where you purchased it. Call us and explain what is missing or wrong.
We will do our best to help with any question or problem you have—and as fast as possible.
TrCeg Covs
ModMPT12

TIP! SAVE TIME AND HASSLE. PLEASE READ ENTIRE INSTRUCTIONS BEFORE BEGINNING ASSEMBLY.
These covers are paintable. Covers may be painted to match your ceiling or to match your pot rack.
(if it was painted another color) These ceiling covers are intended for our Rack It Up pot racks
that have been installed using the Togglers and open eye bolts. They are not recommended
for use with ceiling screw hooks that have been installed directly into wood.
If you install BEFORE attaching the pot rack.
1. Screw the flange nut (washer side up) onto each open eye bolt until it stops just above hook
section.
2. Center Trim Ceiling Cover over toggle hole and screw open eye ceiling bolt through it into the
toggle.
3. Tighten hook until the cover fully and firmly contacts the ceiling.
If you install AFTER attaching pot rack. If you decided to add Trim Ceiling Covers after you
installed your rack, you will need to:
1. Remove the pot rack from the open eye bolt.
2. Remove the open eye bolt from the toggle and screw on flange nut with washer side up.
3. Center the Trim Ceiling Cover over the toggle hole and screw the open eye bolt through it into the
toggle.
4. Tighten hook until the cover fully and firmly contacts the ceiling. The ceiling trim covers should
not be used with racks that are installed using the ceiling screws into wood studs, as they
do not fit tightly against the ceiling.
RACK IT UP! 1-Year Limited Warranty
This product is warranted to be free of material defects for a period of one year from the date of purchase. Cus-
tomer's exclusive remedy shall be the repair or replacement of the defective product and shall be subject to the
following conditions: (1) notice of any defect is received by RACK IT UP within the warranty period and (2) cus-
tomer returns the defective product to RACK IT UP, 24 Colwell Street, Port Hadlock, WA 98339, postage pre-
paid within 20 days following a return authorization number. (A return authorization number may be obtained
by calling the number at the bottom of this booklet.) There are no other warranties expressed or implied.
THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
RACK IT UP SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE PURCHASE, INSTALLATION OR USE OF RACK IT UP PRODUCTS.
How To Install Trim Ceiling Covers
MISSING A PART?
Please call our TOLL FREE
SERVICE CENTER
1 [phone]
RACK IT UP ™ is a trademarked brand - All rights reserved.
RACK IT UP
24 Colwell Street, Port Hadlock WA 98339
TOLL FREE [phone]
Item No. Description Qty.
17 Trim Ceiling Cover 2
31x Flange nut 2
31x