
Page 2
4Post Installation Instructions
Kit Contents
Step 1. Rail Attachment: Attach the Inner Rail to the chassis by aligning the Shoulder
Lugs with the keyholes in the Inner Rail and slide until the retaining clip has
secured the Inner Rail to the server. Repeat for the other side.
Kit Contents:
(2) Outer Rail (Left & Right)
(2) Inner Rail
(2) Rear Bracket (Left & Right)
Rear Bracket Hardware:
(8) 8-32 x .312 Flat Head Screw
(8) 8-32 Keps Nut
Mounting Hardware:
(12) 8-32 x .500 Pan Head Screw
(2) Retainer Plate (Left & Right)
(2) Mounting Plate
(2) Latch Plate (Left and Right)
Rack Mount 8x:
(8) 10-32 x .500 Pan Head Screw
(8) 12-24 x .500 Pan Head Screw
(8) 12-24 x Square Nut
(8) 12-24 x Cage Nut
Rack Mount 4x:
(4) 10-32 x .500 Pan Head Screw
(4) 12-24 x .500 Pan Head Screw
(4) 12-24 x Square Nut
(4) 12-24 x Cage Nut
Step 2. Attach Rear Brackets: Attach the Rear Brackets to the Outer Rail Assemblies,
XVLQJLQFOXGHGÀDWKHDGVFUHZVDQGNHSVQXWV(QVXUHWKH\DUHVHWWRWKH
required "Mounting Depth".
Inner Rail
(Labeled "R")
Outer Rail
Rear Bracket
(4) 8-32 Keps Nuts
Lug
(4) 8-32 x .312 Flat Head Screws