Arkham Horror Box Organizer
By R&H Firefly Workshops
*Tip - Fully assemble each
step to ensure a proper fit
and location of every piece.
All separators and dividers
will be flush on the top/ends
when properly installed unless
shown otherwise.
Once each step is assembled
correctly, disassemble and
reassemble while adding a
small drop of super glue to
every intersection where
the parts slide together. Then
use paper towel to wipe any
excess glue off of the edges.
Step 1: Separate all of the pieces
from their frames.
Step 2: Assemble Middle Divider
into the base as shown.
Page 1
