R&H Firefly Workshops Settlers of Catan Case... User manual

Settlers of Catan Case Organizer
By R&H Firefly Workshops
Box Organizer Includes:
Step by Step Instructions •
Removable Dividers •
Removable Trays (x4) •
Remobable Tray Lid •
Need extra Card Dividers or have missing/damaged parts? Have comments or questions?
Contact us at:
[email protected]
[email protected]

Settlers of Catan Case Organizer
By R&H Firefly Workshops
Step 1: Separate all of the pieces
from their frames.
Step 2: Assemble the Side Tray
Support as shown. Set aside
until Step 5.
Page 1
*Tip - Fully assemble each
step to ensure a proper fit
and location of every piece.
All separators and dividers
will be flush on the top
when properly installed.
Once each step is assembled
correctly, disassemble and
reassemble while adding a small
drop of super glue to every
intersection where the parts
slide together.

Settlers of Catan Case Organizer
(con't)
Step 3: Assemble the Side Tray Support
as shown and set aside until
Step 5.
Page 2

Wide Tray
Bottom
Narrow Tray
Sides
Settlers of Catan Case Organizer
(con't)
Page 3
Step 4: Assemble the Land Tile Tray as
shown and set aside until
Step 5.

Settlers of Catan Case Organizer
(con't)
Page 4
Step 5: Assemble the Side Tray Supports
to the Land Tile Tray as shown.
Set aside until Step 7.

Settlers of Catan Case Organizer
(con't)
Page 5
Step 6: Assemble the Card Holder Tray
as shown and set aside until
Step 8.

Settlers of Catan Case Organizer
(con't)
Page 6
Step 7: Assemble the Front Divider
to the Land Tile Tray as shown.

Settlers of Catan Case Organizer
(con't)
Page 7
Step 8: Finish by attaching the Card
Holder Tray and the Rear
Divider as shown.

Locating Tab
Settlers of Catan Case Organizer
(con't)
Page 8
Step 9: Tray 1:
Insert the Center Dividers into
the Tray Bottom as shown.
Do not place Super glue under
the Locating Tab.

Settlers of Catan Case Organizer
(con't)
Page 8
Step 10: Finish by attaching the Card
Holder Tray and the Side
Dividers as shown.