Randolph Morris ATWELL RM8478GY-SWH User manual

Bathroom Vanity
Installation
Tools requested not in the box
Step1: Open the cabinet box, place the cabinet base on
right position, level the cabinet with leg levelers.

Step2: Mark the positon at the side of the vanity base where the
makeup table you wanna install
Mark the position at right
side of the vanity base
Mark the position at left
side of the vanity base

Step3:Use the self-tapping screw connected makeup cabinet with
two side vanity base.
Screw it connected with the
right side of the vanity base
Screw it connected with the
left side of the vanity base

Step4:Fastern the markup cabinet into the wall
with anchors and screws
Step5:Aplly bead of quality and clear or white silicone sealant
evenly the top of the vanity and makeup table
Step6:Place the counter-top onto the top of the cabinet and make
up table.
Step7:Apply the silicone sealant evenly along the bottom of the
backsplash and wall
Step6:Finnally, place the bottom side of the backsplash with
sealant onto the counter-top and check the alignment of the
backsplash, adjust the leg levelers as needed