Ranger TouchPad RG2ACKB482 User manual

7
9．Disposal
10．Safety
If possible, dispose of the used appliance at a recycling centre. Do not dispose of
the used appliance with the household waste.
Keep this appliance away from fluids,such as water.
Never try to open or to repair this product yourself.

1 2
1．Overview
2．Package contents
2.4GHz Wireless Technology range up to 5-10M
Keyboard with built-in high resolution touchpad
Including multimedia 12 hot keys
Exquisite nano USB receiver
Plug and play with Windows XP/VISTA/ 7 / 8
1 unit USB Wireless Receiver
1 unit Wireless Touchpad Keyboard
2 units AAA Batteries
1 unit User's Guide
3．System Requirements
Windows XP/VISTA/7 / 8
USB port
4．Specifications
Windows XP/VISTA/ 7 / 8 compatible
Interface:USB 1.1/USB 2.0
Dimension: 410(L)×131 (w)×26.8 (H)mm
Weight: 475±20g
Peak force: 55±7g
Total Travel (mm): 2.4-2.8mm
Switch Life: 5million Cycles
RF receiver: 17.8x15.2x4.6mm
Operation Frequency: 2.4GHz RF
Transmission Distance: 5-10 meters (depend on user's environment)
Hot keys: 12 hot keys, Touch pad
Operation temperature:0 to 50 degrees Celsius
Storage temperature:-20 to 70 degrees Celsius
FCC,CE and RoHS Approval
5．Installation and connection:
STEP 2:
Remove the battery compartment lid at the back of the keyboard and insert two AAA battery
You are now ready to begin using your wireless keyboard
If you don't want to use it, please turn off the power switch and unplug the usb receiver.
Note: When first switch on the keyboard , the battery indicator red led light will be
F5 key is to refresh the screen.
blinking for a few seconds.
provided as shown below. Please be careful not to load the battery incorrectly. There are guide
marks inside the compartment to make sure they are in the right direction. Please turn on the
If the battery power is low , the battery indicator red led light will be flashing for a long time.
power switch .
The battery provided will last for many hours of use, but if the keyboard begins to respond
slowly, the battery should be replaced. Alkaline or rechargeable batteries may be used as
replacements.
STEP 1:
Connect the USB receiver to an open USB port on your computer or to a port on an additional
USB hub.

3 4
Function Name
Multimedia keys Description
Back Goes back to a previous item that was already viewed in programs that support
the“Back”command,such as a Web browser.
Forward Goes to the next item-if it was previously viewed in the same session,in programs
that support the “Forward”command,such as a Web browser.
Home Starts the default Web browser and goes to the home page. If the Web browser is
active, it opens the home page.
Favorite Open favorites folder
E-mail Starts the default e-mail program.
Media Starts Windows default Media player
Play/Pause Play/Pause
Prev track Switches to the previous media track.. Press once for each preceding media track.
Next track Switches to the next media track. Press once for each subsequent media track.
Mute Mutes the computer’s sound volume. Press it again to turn the system volume
back on.
Calculator Open calculator
My computer Open my computer
7．Using Touchpad
1) The function of touch keys
2) Using Touchpad
6．Multimedia keys( Combined by pressing the "FN" key together to
To perform the drag function , please double tap and drag.
Definition of Finger Gesture
Touchpad Function
Moving
Click(Tap)
Double click Left button double click
Left button click
Move cursor
Mouse Function Finger Gesture Finger Action
Slide finger
Tap one finger
Double tap one finger
Tap and drag
Drag Drag
activate the function )：

5 6
8. Touchpad
(1 Touch pad mouse modes / function ：)
1 Slide using one finger : Mouse cursor moving)
2) Tap using one finger: Mouse left click
3) Tap using 3 fingers together: Mouse right click
4) Horizontally slide 2 fingers left from the middle: Backward
(2 2 modes switch way (Switch between Touchpad mouse mode and Touchpad keypad )
mode): Need to Press FN Key
1 The default mode is mouse mode when it's powered on for the first time, which ) can
be changed to keypad mode on touchpad by pressing FN key one time. If you want
to switch back to the mouse mode , please press the FN key again.
2) The current mode can be saved after the keyboard is powered off.
(3 Indicator light ( At top right side of touch pad ) )
1 Keypad mode：Green indicator light flash 3 times in 1 second and then goes off)
2) Mouse mode：Green indicator light flash 1 time in 1 second and then goes off
5) Horizontally slide 2 fingers right from the middle: Forward
6) Slide 2 fingers vertically up / down : Scroll up / down
7) 2 fingers pinch: gently draw two fingers close or apart(at a speed of 5-40mm/s
approx.) around the center of touchpad to zoom in or zoom out the file
Mouse mode / function for use in Windows 8 only ( Refer to no. 8 to 11 only )
8) A single finger swipe from the top edge: gently slide down one finger from the
windows
middle of top edge to the middle (at a speed of 5-40mm/s approx.) to pop up the
10) A single finger swipe from the right edge: gently slide one finger from the middle
Win 8 touch interface
of the right edge to the left side（at a speed of 5-40mm/s approx.）to pop out menu
9) A single finger swipe from the left edge: gently slide one finger from the middle
on the right side of Win 8
of the left edge to the right side（at a speed of 5-40mm/s approx.）to switch
11) A single finger swipe from top edge and out from the bottom edge: gently slide
down one finger from the middle of the top edge till out from the bottom edge (at a
speed of 5-40mm/s approx.) to close the current application program on the Win 8
touchpad interface.