Rave Sports Bongo User manual

Bongo™
Owner’s Manual
10-FOOT MODEL
(shown)
13-FOOT MODEL

Table of Contents
Introduction............................................................................. 2
Safety Rules and Information ................................................. 3
Inflating Your Bongo™ ........................................................... 5
Assembling and attaching the ladder ..................................... 7
Cleaning and Storage........................................................... 11
Repairs ................................................................................. 12
Return Authorization Policy .................................................. 13
Warranty Information..................................................14
Contents in this package
•Bongo tube
•
Inflation adaptor
•Repair kit
•Warranty Registration
•Boarding ladder
•Ladder stabilizer
Please make sure you have received the contents listed, then
record the following information for future reference.
Date Purchased: _________________________________
Purchased from: _________________________________
Copyright ©
All rights reserved. No part of this publication may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopy, recording, or any information
storage and retrieval system, without permission in writing from the publisher. Requests
should be mailed to RAVE Sports, Inc., 3325 Labore Rd., St. Paul, MN 55110.
1

Introduction
Water sports can be safe and fun for all levels of enthusiasts.
The Owner’s Manual is presented to enhance your enjoyment
of the sport. It is intended to alert you to some of the
potentially dangerous conditions that can arise in all water
sports.
Please take a few minutes to read this manual before
assembling and using the product. Although the product is
simple to use, this manual contains important safety
information that you and all users must understand to safely
enjoy the Bongo.
If you have any questions regarding this product, please call
RAVE Sports at 1-800-659-0790. Please have the serial
number from your product ready when you call.
W A R N I N G
UNSAFE USE OF THE BONGO CAN RESULT
IN PERSONAL INJURY OR DEATH.
To reduce the risk of injury, read and
follow all instructions and warnings in
this manual. Do not use this product
unless you understand and accept the risk
of injury involved with this activity.
!!
2

3
Safety Rules and Information
•Read and understand all of the information contained in this
owner’s manual before assembling and using your product.
•Make sure that everyone who uses the product is provided
with and understands these safety rules and information.
•The Bongo is designed to be used on land or in large bodies
of water with depths of at least 8 feet of water. Do not use or
allow anyone else to use the product in swimming pools.
•Choose a location for your product that is most protected
from wind, of sufficient water depth, and free of obstructions.
•Always anchor the Bongo securely before it is used on water.
•Always wear a U.S. Coast Guard approved Type III (PFD)
vest when using the product.
•Never use the product after sunset, before dawn, or any
other time in poor lighting conditions.
•Never use the product in rough surface water conditions,
during storms, or when there is lightning. If an unexpected
storm arises while using the product, seek shelter on shore.
Do not stay on the product.
•Never use the product under the influence of alcohol or drugs.
•Always stay under control while using the product.
•Do not allow more than three people (500 lbs. max) to
lounge on the 10ft. Bongo or more than five people (700 lbs.
max) to lounge on the 13ft. Bongo at one time. For either
product, allow only one person (240 lbs. max) to bounce on
the Bongo at one time.
•Never swim or play under or around the Bongo.

•Never dive off of the Bongo head first. If you choose to jump
off the product, always enter the water feet first.
•Never use the product while tired or fatigued. Use extreme
caution while swimming between the shore and the product.
Do not attempt to swim this distance if you are tired or fatigued.
•Always inspect the areas around and under the product
before each use to ensure the water is deep enough and
free of all rocks, logs, sand bars, and underwater
obstructions and that the product is a safe distance from
above water hard objects. Ask about local water conditions
before using the product in unfamiliar water.
•When not in use, secure the product against unauthorized or
unsupervised use.
•Inspect your product for any worn, defective, or missing parts.
•Do not attempt flips, somersaults or other acrobatic
maneuvers on the product. Most debilitating spinal cord
injuries that occur during trampoline use involve
somersaults. Improper landing during a somersault
produces serious risk of broken bones, cuts, nerve damage,
spinal cord or brain injury, or death.
•Use the Bongo only under mature, knowledgeable adult
supervision.
•Not recommended for children under age six.
•Do not over inflate. Over inflation can cause seam rupture.
•When using on land, always maintain adequate clearance
from hard surfaces or obstructions above and around this
product. Use on soft sand or place shock-absorbing
material around ground perimeter.
4

Inflating Your Bongo
Step 1:
Lay the Bongo on a flat surface. Make sure there are no sharp objects
under the product that might puncture the tube.
Step 2:
Locate the valve of the Aqua Bongo and unscrew the cap. We
recommend using the High Speed Inflator/Deflator from RAVE Sports
to inflate and deflate. (Part # 01083)
To lock open valve, depress stem and rotate
¼ turn clockwise. To close valve, depress
stem and rotate ¼ turn counter-clockwise.
The valve stem should be in the depressed
position while inflating. Replace cap on valve
after inflation to ensure air tight seal.
OPEN
CLOSE
A special inflation adaptor is included with this
product. If you are using the RAVE Sports High
Speed Inflator, simply lock the adaptor onto the
end of the inflation hose and insert into the
valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor will automatically open the valve
when inserted and will close the valve when removed. You do
not need to manually open/close the valve when using this
special adaptor.
If you will be using a shop vacuum or other
inflation device with a larger nozzle, use the
1 ¼” diameter coupler (included) between the
valve adaptor and the hose of your inflator.
Make sure the hose is attached to the blower
5
Adaptor
Cou
p
ler

port of the vacuum for inflation. Insert the adapter into the air valve
and lock into place by turning clockwise.
Inflate until the tube is firm and resistant to pressure. Your fist should
create only a slight depression when pushed against the tube and the
surface should be stretched taut in all directions. Replace cap to
ensure an air tight seal.
NOTE:
It is normal for the air pressure within the tube to fluctuate depending
on air and water temperatures. It may be necessary to increase or
decrease the air pressure in your product accordingly. To avoid
damage on extremely hot days it may be necessary to check and
release the air pressure from your product throughout the day.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2 PSI if filling with compressed
air. Excessive pressure can cause the tube to
rupture with potentially damaging force to
eyes, ears, skin and limbs. Use of an air
compressor or over-inflation can rupture the
tube beyond repair, thus voiding the warranty.
!!
6

Attaching the ladder
Step 1:
Curved portion
The ladder consists of two pieces: a ladder with
straps and a molded plastic ladder stabilizer.
Orient the stabilizer on the notched side of the top
two ladder steps and the curved portion is facing
upwards towards the top of the ladder. While
maintaining this orientation, flip the ladder upside
down to expose the underside of the steps.
Step 2:
Line up the large opening of the keyhole slots
with the four bolts on the underside of the top two
steps.
Step 3:
Slide the stabilizer towards the ladder to fully
engage the bolts in the narrow end of the slots.
Tap the stabilizer with your hand to ensure the
bolts are fully engaged in the slots.
Note: If the stabilizer feels loose after mounting,
tighten the bolts slightly leaving minimal clearance between the bolt
flange and the plastic stabilizer. This slight clearance will allow the
stabilizer to be easily removed by hand (without tools) for storage.
To remove stabilizer, simply slide in opposite direction.
7

Step 4:
To use on water, attach the ladder in the center of the blue panel to the
left of the yellow panel that contains the air valve. The warning label on
the bounce surface must be visible to anyone climbing the ladder.
Attach the ladder by looping the quick link, and
webbing around Bongo lacing rope so the
quick link finishes on the underside of the
webbing strap as shown in the first picture.
Weave the quick link into the webbing loop just
above the second handle. Turn the nut until
8
ightly closed.
orrectly, the quick link
should be covered by
op webbing strap. The straps
close to parallel as
t
strap
t
Righ
side
Attached c
connection
the t
should be as
possible.

IMPORTANT: It is critical that you loop the webbing properly around
the rope so that they do not rub against the vinyl (see photos).
CORRECT. The left side of the
ladder should be attached to
the left of the black loop. (The
right side of ladder, not shown,
should be to the right of the
black loop.) The webbing’s
inside edge should rest against
the black nylon loop that
surrounds the lacing rope.
INCORRECT. The webbing
must not pull against the vinyl
loops. Rubbing the vinyl may
cause premature wear and
tear.
Step 5:
When properly installed, the ladder will hang with the
curved portion of the stabilizer against the underside
of the Bongo.
Photo shown
with Bongo
out of water
to show
proper ladder
orientation.
9

10
Step 6:
Attach an anchoring device to the ring or mount on the inner surface of
the tube just above the water line, opposite of the ladder.
Note: For seasonal anchoring situations, it is important to use an
anchor weighing a minimum of 80 lbs.
The Bongo is now ready to use! Please read and follow all safety
instructions before enjoying your Bongo.

11
Cleaning and Storage
When the inflatable product is not being used, store it in a
covered, shaded area. This will help protect it against ultraviolet
(UV) rays and extend the life of the product.
Clean the inflatable completely with a mild soap and fresh water.
NEVER USE PETROLEUM BASED PRODUCTS OR
SOLVENTS FOR CLEANING.
NEVER USE A POWER WASHER SINCE THE HIGH
PRESSURE WATER JET WILL DAMAGE THE SOFT PVC
COATING ON THE TUBE BEYOND REPAIR.
Product should be completely dry and remain dry while stored.
Roll the product loosely and place in a container, preferably one
that rodents can’t chew through.
Secure against unauthorized or unsupervised use.
Store in a cool, dry location. Do not store product directly on
concrete surface. Place mothballs around stored inflatable to
keep mice and insects away.
::::::::::::::::::::::::::::::::: IMPORTANT:::::::::::::::::::::::::::::::::
Rodents like muskrats may be attracted to the PVC vinyl of your product.
When your product is on the water, maintaining full air pressure during
periods of non-use will discourage them from chewing the vinyl. Another
way to ease the problem of nuisance rodents is to remove the temptation
by taking the product out of the water at night. Another option is to make
the whole area unattractive to rodents by changing the environment,
making the area less hospitable for rodents. Removing any food source
from the shoreline can also be a good deterrent. Check with your local
DNR for additional guidance or possible restrictions.

12
Repairs
For large holes, tears or seam failures, contact RAVE Sports Customer
Service at 1-800-659-0790. For minor holes or tears:
Inflate the product and locate the leak by spraying the tube with
mild soapy water.
Determine the hole size and cut a patch 1-2 inches wider than the
diameter of the hole. Make sure all corners of the patch are
rounded.
Deflate the product and clean the patch and area around the hole
with rubbing alcohol. Let dry.
READ AND UNDERSTAND THE WARNINGS ON THE GLUE
CONTAINER.
Apply glue to the patch and the area around the hole. Let the glue
dry until it is tacky to the touch.
Lay the product on a flat, hard surface and apply the patch.
Working from the center to the outer edge, rub out any air bubbles
between the patch and the product.
Let the patch dry for 24 hours before attempting to inflate the
product.

13
Return Authorization Policy
1. Customer agrees to ship the product covered by the Return Authorization (R/A)
number within thirty (30) days of receipt of the R/A number. Customer understands
that failure to ship the product within thirty (30) days will result in the forfeiture of the
R/A. RAVE Sports, Inc. (RAVE) will not accept any product that fails to ship within the
thirty day time period and the customer will be responsible for all expenses related to
shipping and return of rejected product.
2. Customer agrees that RAVE, at its own discretion, will determine whether the
product being returned under the R/A Policy is covered by RAVE’s Limited Warranty.
3. RAVE agrees to notify or provide, within a reasonable time period , the customer
with:
a. The acceptance or rejection by RAVE of the warranty claim with regard to the
product returned.
b. For products outside of the Limited Warranty, a price quote for the repairs
required to return the product to a usable state including a cleaning charge for
excessively dirty products. The customer agrees that rejection of the price
quote or failure to approve the price quote in accordance with Section 3(c)
below will result in the immediate return of the product, in the condition it was
received by RAVE, FOB shipping location to the address provided by the
customer. Customer further authorizes RAVE to charge the customer’s credit
card for the costs of shipping and handling associated with the return of the
product, and the customer agrees to accept such charges.
c. If RAVE does not receive an approval from the customer within 45 days of first
attempt, the product will be returned to the customer at the customer’s
expense. Customer authorizes RAVE to charge the customer’s credit card for
the costs of shipping and handling associated with the return of the product,
and the customer agrees to accept such charges.
4. Upon customer approval, RAVE will complete all necessary repairs. If while
repairing the product additional damage is discovered and the cost of the repair is
less then 10% of the original quote or $25.00, RAVE will proceed with the repair.
The customer agrees to accept these additional charges. If the additional cost
exceeds 10% or $25.00, RAVE will contact the customer for approval.
5. Once all repairs are complete, the customer authorizes RAVE to charge the
customer’s credit card for the costs of the repairs, and all shipping and handling
associated with the return of the product, and the customer agrees to accept such
charges.
6. RAVE will ship the product to the address provided FOB shipping location.

14
Lifetime Warranty
The Lifetime Warranty set forth below is given by RAVE Sports, Inc. with respect to product(s)
purchased and used in the United States and internationally.
RAVE Sports’ reinforced PVC product(s), when delivered to you in a new condition in original
container, are warranted against defects in material or workmanship for the life of the product so long
as the product remains the possession of the original owner. The average life for RAVE’s products
covered by this warranty is 7 years. The average life of the product may vary depending on use and
other conditions. Defective product(s) returned to RAVE Sports or authorized service location and
proven to be defective upon inspection, will be repaired or exchanged for new product(s) at a prorated
value or part(s) where applicable. The warranty period for any replacement product shall be consistent
with the terms of the Lifetime Warranty.
When returning any product under this Lifetime Warranty, you must first contact RAVE Sports to obtain
a return authorization number. The product must be packaged in its original carton with a copy of the
bill of sale (or invoice of purchase), together with a complete explanation of the problem. Shipping
charges, if any, must be prepaid. Products covered by this Lifetime Warranty will be returned to you
without charge by RAVE Sports.
This Lifetime Warranty covers all defects encountered in normal use of the product and does not apply
in the following cases:
a) Loss or damage to the product is due to abuse; mishandling; alteration; accident; failure to
follow operating, maintenance or storage instructions; service performed by a party other than
RAVE Sports’ authorized service personnel; or any acts of God, including storm or animal
damage.
b) The product has had its serial number(s) or dating altered or removed.
c) Wear and tear from normal use and weathering.
No implied warranty (or condition), including any implied warranty (or condition) of merchantability or
fitness for a particular purpose, applies to the product after the applicable period of express warranty
stated above, and no other express warranty or guaranty, except as mentioned above, given by any
person, firm, or corporation with respect to the product shall bind RAVE Sports. (Some states or
provinces do not allow limitations on how long an implied warranty lasts, so the above limitations may
not apply to you).
RAVE Sports shall not be liable for loss of revenue or profit, failure to realize savings or other benefits,
or for any other special, incidental or consequential damages caused by the use, misuse or inability to
use the product regardless of the legal theory on which the claim is based, and even if RAVE Sports
has been advised of the possibility of such damages. Nor shall recovery of any kind against RAVE
Sports be greater in amount than the purchase price of the product sold by RAVE Sports and causing
the alleged damage.
Without limiting the foregoing, you assume all risk and liability for loss, damage or injury to you and
your property and to others and their property arising out of the use, misuse, or inability to use any
product sold by RAVE Sports not caused directly by the negligence of RAVE Sports, (Some states or
provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply to you). This Lifetime Warranty shall not extend to anyone other than the
original purchaser of any product, or the person for whom it was purchased as a gift.
This Lifetime Warranty gives you specific legal rights, and you may have other rights which vary from
state to state or province to province.

3325 Labore Rd.
St. Paul, MN 55110
800-659-0790
www.ravesports.com
March 08
15
Table of contents
Other Rave Sports Baby & Toddler Furniture manuals
Popular Baby & Toddler Furniture manuals by other brands

ingenuity
ingenuity Comfort 2 Go Fanciful Forest Series manual

Westwood Design
Westwood Design WOODLAND ADVENTURES DP-CS-3120CS-ELM Assembly instruction

Kinderkraft
Kinderkraft Fini user manual

Jole
Jole Excursion P1402 manual

babybay
babybay ORIGINAL Assembly instructions

Childcare
Childcare Nesso Mini Swing "Trios" 037701-389 manual

Evenflo
Evenflo infant/breathable carrier instructions

Munchkin
Munchkin MKCA0112 REV2 instructions

SAUTHON selection
SAUTHON selection SIXTIES BLANC BOIS 73951A Technical manual to keep

fantastic furniture
fantastic furniture CABIN TODDLER BED manual

Oeuf
Oeuf RHEA 1RH0x manual

baby&child
baby&child ADELE quick start guide