Westwood Design WOODLAND ADVENTURES DP-CS-3120CS-ELM User manual

WOODLAND ADVENTURES
Changing Tray
Model: DP-CS-3120CS-ELM
(CS-3120CS)
RTG SKU #: 39831082
Assembly Instruction
This changing tray is designed to be use with RTG SKU - 34131083
(DP-DD-3108LD-ELM) dresser only. Dresser sold separately.

FALL HAZARD - Children have suffered serious injuries after falling from changing tables.
Falls can happen quickly.
STAY in arm’s reach of your child.
SUFFOCATION HAZARD: Babies have suffocated while sleeping in changing area.
Changing area are not designed for safe sleeping.
NEVER allow baby to sleep in changing area.
WARNING ! When child reaches a maximum weight of 30 lbs, the changing tray shall no
longer be use.
The changing pad (not included) used should be 16.5” (41.9cm) W x 32.5” (82.55cm) L with a
maximum thickness of 1” (2.54cm).
Read all instructions before use of the changing tray.
Do not use the changing tray if it is damaged or broken.
Keep instructions for future use.
Congratulations on your purchase of a Westwood product. We take great pride in the quality and
design of our furniture. It is important that you read these instructions carefully and completely to
ensure that this product functions as it was designed.
After opening the package, check to see that all the parts are present. If you think something is
missing, please contact your retailer, and they can arrange to have the missing parts quickly replaced.
You can also contact us directly, by calling1-908-719-4707, or emailing [email protected]
If any aspect of these instructions is unclear, please contact your retailer or Westwood Design
for assistance.
WARNING
•
•
•
•
•
•
•
•
635 N. Billy Mitchell Rd.,
Salt Lake City, UT 84116
Phone: [phone]
www.westwoodbaby.com
ALWAYS secure this product to RTG SKU - 34131083 (DP-DD-3108LD-ELM) dresser only by using
the hardware provided. See instructions.
This changing tray is designed to be use with RTG SKU - 34131083 (DP-DD-3108LD-ELM)
dresser only. Dresser sold separately.

Changing Tray (Cabinet not included)
Changing Tray
( x1 )
Changing Tray Top Panel
( x1 )
JCBC Bolt M6 x 35mm
( x4 ) Allen Wrench
Changing Tray Top Panel
Changing Tray
Step 1

Made in Vietnam
Screwdriver - Not provided
Changing Tray
Dresser
Changing Tray (Cabinet not included)
Screwdriver - Not provided
Metal plate
( x2 )
Tool required
Changing Tray
( x1 )
Screw
( x4 )
Step 2

- After completing assembly, check that all bolts and screws are secure and tight. Hardware
can become loose over time, so it is your responsibility to periodically check the tightness
of all fasteners for as long as you use the crib.
- Wood is a natural material. As such, it can be affected by changes in temperature and
humidity. Extreme changes in humidity and temperature can cause the wood to warp, swell,
crack, or shrink, thus compromising the structural integrity of the crib and making it
dangerous to use.
- Use caution when placing the crib in storage to avoid extremes in temperature or
humidity. Cribs should always be stored indoors in climate controlled, dry locations.
- Use care when using a vaporizer or humidifier around the crib. Do not aim the vapor at
the crib or any other wooden furniture in the nursery. Avoid using vaporizers or humidifiers
for extended periods of time.
- To clean the crib, wipe with a damp cloth and immediately the dry the surface. Do not use
any chemical cleaners or polishes. Such products can leave a residue on the finish and
come in contact with your child.
- Your crib has a durable and protective non-toxic finish. However, if you decide to refinish
it, you must use a non-toxic finish specified for children’s products. Do not use any toxic
stripping methods to remove the old finish.
CARE AND MAINTENANCE
635 N. Billy Mitchell Rd.,
Salt Lake City, UT 84116
Phone: [phone]
www.westwoodbaby.com