Rave SL-3509 User manual

User Manual
Multi-Coloured LED
Disco Ball
SL-3509

Thank you for purchasing this LED Magic Ball, for the sake of the safety
and regular operation of this product, please read the manual carefully
before use.
Open the package to check if any damage has been caused in
transportation. Before turning it on, be sure that the light is safe and
there are no exposed wires. Please make sure the main voltage is within
100-240V, otherwise the lifetime of the LED will be reduced. Any miss-
use and damage will avoid the warranty. There are two control models
on our products: Digital control and Remote control.
USER MANUAL
UNPACKING

REMOTE CONTROL
Power On/Off
For changing mode between sound-activated mode and
gradual mode
LED light rotating position clockwise, counter-clockwise, fixed
Rotating speed fast, normal, slow (3 levels)
Flash
Music Control
Memorise the mode you prefer, product will automatically use
the mode when you start again
Red and pink LED Strobe
Green and Orange LED Strobe
Blue and white LED Strobe
RGB and white LED Strobe

Power Input: 100-240VAC @ 50-60Hz
Power Consumption: 30W
Light Source: 6x3W RGBWYP LED
• Please make sure to turn off the light before installation and
maintenance.
• Please make sure when operating the light you have good ventilation.
• This light is designed for indoor use. Please keep it dry whenever
using it. Installation and maintenance should be done by a technician.
• Don’t use any voltage that does not comply with the specifications
shown.
• Don’t stare at the lighting source; it may damage your eyes.
• Don’t operate unless there is stable voltage.
• Don’t use in a moist environment.
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: [phone]
Fax: [phone]
www.techbrands.com