RCF TT 515 User manual

TT 515 - TT 808
ACCESSORIES
BRACKETS and ACCESSORIES
FOR RCF TT 515-A and TT 808-AS
OWNER’S MANUAL
MANUALE UTENTE

2

3
CONTENTS
ENGLISH
SAFETY PRECAUTIONS AND GENERAL INFORMATION���������������������������������������������������������������������������������������������������������������������������� 4
1. H-BR - HORIZONTAL BRACKETS .................................................................................................................................................5
2. V-BR - VERTICAL BRACKETS........................................................................................................................................................7
3. FL-BR - FLYING BRACKETS..........................................................................................................................................................9
4. PM-KIT - POLE MOUNT KIT ......................................................................................................................................................12
5. WARNINGS...............................................................................................................................................................................13
ITALIANO
AVVERTENZE PER LA SICUREZZA E INFORMAZIONI GENERALI ����������������������������������������������������������������������������������������������������������� 14
1. H-BR - STAFFA ORIZZONTALE ...................................................................................................................................................15
2. V-BR - STAFFA VERTICALE.........................................................................................................................................................17
3. FL-BR - STAFFA SOSPENSIONE .................................................................................................................................................19
4. PM-KIT - POLE MOUNT KIT ......................................................................................................................................................22
5. AVVERTENZE ............................................................................................................................................................................23

4
EN
SAFETY PRECAUTIONS AND GENERAL INFORMATION
The symbols used in this document give notice of important operating instructions and warnings which must be strictly followed�
CAUTION Important operating instructions: explains hazards that could damage a product, including data loss
WARNING Important advice concerning the use of dangerous voltages and the potential risk of electric shock,
personal injury or death�
IMPORTANT NOTES Helpful and relevant information bout the topic
SUPPORTS, TROLLEYS AND CARTS Information about the use of supports, trolleys and carts� Reminds to move with extreme caution and
never tilt�
WASTE DISPOSAL This symbol indicates that this product should not be disposed with your household waste, according to
the WEEE directive (2012/19/EU) and your national law�
IMPORTANT NOTES
This manual contains important information about the correct and safe use of the device� Before connecting and using this product, please read this instruction manual
carefully and keep it on hand for future reference� The manual is to be considered an integral part of this product and must accompany it when it changes ownership
as a reference for correct installation and use as well as for the safety precautions� RCF S�p�A� will not assume any responsibility for the incorrect installation and / or
use of this product�
IMPORTANT NOTES
Suspending any object is a potentially dangerous operation and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations
of rigging objects overhead� RCF strongly recommends that all speakers should be suspended taking into account all current national, federal, state and local regulations�
It is the responsibility of the installer to ensure that all speakers are safely installed in accordance with all such regulations� RCF strongly recommends to inspect the
system at least once a year� If any sign of weakness or damage is detected remedial actions should be taken immediately�The user is responsible for making sure that
the supporting surfaces and any additional hardware used is capable of supporting the system�Any hardware used to suspend a loudspeaker array that is not provided
by or associated with RCF is not reccomended and is under the responsibility of others�
SAFETY PRECAUTIONS
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all the instructions
5. Install in accordance with manufacturer’s instructions
6. Only use attachments and accessories specified by the manufacturer
7. All the precautions, in particular the safety ones, must be read with special attention, as they provide important information�
Never attempt to carry out any operations, modifications or repairs that are not expressly described in this manual.
RCF S.p.A. strongly recommends this product is only installed by professional qualified installers (or specialised firms) who can ensure correct
installation and certify it according to the regulations in force.
IMPORTANT NOTES
RCF declines all responsabilities if the user applies this accessory to other configurations not mentioned in this manual.
RCF S.p.A. reserves the right to make changes without prior notice to rectify any errors and / or omissions.
Always refer to the latest version of the manual on www.rcf.it.

5
EN
1. HORIZONTAL BRACKET H-BR TT 515
NOTE: HORIZONTAL BRACKET H-BR TT 515 is specifically designed to be used only with RCF TT 515.
OVERVIEW
H-BR TT 515
SECURING THE BRACKET TO A WALL
Always secure the bracket by screwing the screws at least through the four corner holes and the central one�
HANGING THE SYSTEM
When hanging the system always use the central hole, plus other holes if necessary�
TRUSS CLAMP NOT INCLUDED

6
EN
1. HORIZONTAL BRACKET H-BR TT 515
NOTE: When installing the system always use appropriate and suitable screws to the wall or support.
SECURING THE H-BR TO THE SPEAKER
Place the bracket on the speaker and secure it with the two knobs or bolts provided�
To change the inclination, loosen the knob or bolt and tilt the speaker� Once choosen the desired inclination tighten strongly the knob or bolt�

7
EN
2. VERTICAL BRACKET V-BR TT 515
NOTE: VERTICAL BRACKET V-BR TT 515 is specifically designed to be used only with RCF TT 515.
OVERVIEW
V-BR TT 515
SECURING THE BRACKETS TO A WALL
Always secure the bracket by screwing the screws at least through the four corner holes and the central one�
HANGING THE SYSTEM
When hanging the system always use the central hole, plus other holes if necessary�
TRUSS CLAMP NOT INCLUDED

8
EN
2. VERTICAL BRACKET V-BR TT 515
SECURING THE V-BR TO THE SPEAKER
Place the bracket on the speaker by inserting it on the inside of the speaker handle� Then make the bracket hole and the speaker top hole match
and secure the bracket with the knob or bolt provided�
To change the inclination, loosen the two side knobs or bolts and tilt the speaker� Once choosen the desired inclination tighten strongly the two
knobs or bolts�
NOTE: When installing the system always use appropriate and suitable screws to the wall or support.

9
EN
3. FLYING BRACKET FL-BR TT 515
NOTE: FLYING BRACKET FL-BR TT 515 is specifically designed to be used only with RCF TT 515.
OVERVIEW
FL-BR TT 515
SECURING THE FL-BR TO THE SPEAKER
Place the FL-BR on top of the speaker and slide it to the front side, making the rear curved part of the bracket envelop the speaker top handle�

10
EN
3. FLYING BRACKET FL-BR TT 515
Now tilt the bracket a few degrees on the side, enough to be able to insert the bolt on the speaker top hole�
Then replace the bracket on its proper position and tighten the bolt strongly�

11
EN
3. FLYING BRACKET FL-BR TT 515
By moving the shackle on the bracket holes, the speaker inclination can be changed to the desired angle�

12
EN
4. POLE MOUNT KIT PM-KIT TT 515
NOTE: POLE MOUNT KIT PM-KIT TT 515 is specifically designed to be used only with RCF TT 515.
OVERVIEW
POLE MOUNT KIT PM-KIT TT 515
SECURING THE POLE MOUNT KIT TO THE SPEAKER
Screw the pole mount kit to the speaker top or bottom hole�
Once the pole mount kit is strongly tighten to the speaker you can mount it on a speaker stand or over a subwoofer�
POLE
MOUNTED
SUBWOOFER
MOUNTED
Recommended
Subwoofer:
RCF TT 808-AS

13
EN
5. WARNINGS
NOTE: With the use of eyebolts or snap-hooks it is possible to hang the speaker by its handles. Be careful to choose the right
mechanics, appropriate for the speaker weight and dimension.
WARNING! CAUTION! To use this product with the subwoofer pole-mount, before installing the system, please
verify the allowed configurations and the indications regarding the accessories, on the RCF website to avoid any danger and
damages to people, animals and objects. In any case, please assure the subwoofer which is holding the speaker is located on
an horizontal floor and without inclinations.
WARNING! CAUTION! The use of these speakers with Stand and Pole Mount accessories can be done by qualified
and experienced personnel only, trained appropriately on professional systems installations. In any case it’s the user’s final
responsibility to ensure the system safety conditions and avoid any danger or damage to people, animals and objects.

14
EN
6. VERTICAL BRACKET V-BR TT 808
2� Place the bracket over the speaker and screw it to the cabinet with the four M10 screws (and washers) provided�
With the use of the vertical bracket V-BR TT 808 it is possible to suspend one or two subwoofers TT 808-AS�
1� Remove the four M10 screws from both the sides of the speakers�

15
EN
6. VERTICAL BRACKET V-BR TT 808
An additional subwoofer TT 808-AS can be placed below the first one with the use of two linking brackets�
1� Remove the four M10 screws from both the sides of the speakers�
2� Place the linking brackets on both sides (as shown in the picture) and screw them to the cabinet with the same M10 screws (and washers)
premoved earlier�
3� Place the second subwoofer in cardioid configuration and screw the bracket to it with the M10 screws provided�
NOTE: The same operations must be done on both sides of the speaker
NOTE: A maximum of two TT 808-AS can be suspended with the vertical bracket.

16
EN
7. LINK BAR FL-B LINK TT 515
With the use of the LINK BAR FL-B LINK TT 515 it is possible to suspend a TT 515-A below a single suspended TT 808-AS�
1� Loosen the M10 upper screw and completely remove the lower M10 screw�
2� Place the LINK BARS on both sides and letting the upper screw pass throug the circular bottonhole; then screw back the lower screw (do not
tighten the screw yet)�
3� Pull down the bracket and tighten both the upper and lower screw�

17
EN
4� Place a TT 515-A between the two brackets and fix it by placing the two knobs or bolts provided�
5� Choose the right inclination and tighten the bolts or knobs�
NOTE: The same operations must be done on both sides of the speaker
NOTE: This configuration can be only done with one TT 808-AS and one TT 515-A.
7. LINK BAR FL-B LINK TT 515

18
IT
AVVERTENZE PER LA SICUREZZA E INFORMAZIONI GENERALI
I simboli utilizzati in questo documento notificano importanti istruzioni operative e avvertimenti che devono essere seguiti attentamente�
CAUTELA Importante istruzione operativa: notifica un pericolo che potrebbe danneggiare il prodotto, compresa la perdita di
dati
ATTENZIONE Avvertimento importante riguardante l’uso di voltaggi pericolosi e il potenziale rischio di shock elettrico, lesioni
personali o morte�
NOTE IMPORTANTI Informazioni utili e rilevanti sull’argomento
SUPPORTI, TROLLEY E CARRRELLI Informazioni riguardanti l’utilizzo di supporti, trolley e carrelli� Suggerisce di muovere con estrema cautela e di non
inclinare il carico�
SMALTIMENTO Questo simbolo indica che il prodotto non deve essere smaltito con i rifiuti ordinari, così come indicato nella
direttiva WEEE (2012/19/EU) e nelle normative nazionali in vigore�
NOTE IMPORTANTI
Questo manuale contiene informazioni importanti sull’uso corretto e sicuro del dispositivo� Prima di collegare e utilizzare questo prodotto, leggere attentamente questo
manuale di istruzioni e tenerlo a portata di mano per riferimenti futuri� Il manuale deve essere considerato parte integrante di questo prodotto e deve accompagnarlo in
caso di cambio proprietà come riferimento per la corretta installazione e utilizzo nonché per le precauzioni di sicurezza� RCF S�p�A� non si assume alcuna responsabilità per
l’installazione e / o l’uso errati di questo prodotto�
NOTE IMPORTANTI
La sospensione di qualsiasi oggetto è un’operazione potenzialmente pericolosa e deve essere svolta solamente da persone dotate di una conoscenza approfondita delle
tecniche e delle normative relative alla sospensione degli oggetti� RCF raccomanda vivamente che tutti i diffusori e relativi accessori vengano sospesi tenendo conto di tutte
le normative nazionali, federali, statali e locali vigenti� È responsabilità dell’installatore assicurarsi che tutti i diffusori siano installati in modo sicuro in conformità con tutte
queste normative� RCF raccomanda vivamente di ispezionare il sistema almeno una volta all’anno� Se viene rilevato qualsiasi segno di debolezza o danno sarà necessario
intraprendere immediatamente azioni correttive� È responsabilità dell’utente assicurarsi che le superfici di supporto e qualsiasi altra meccanica utilizzata siano in grado di
supportare il sistema� Qualsiasi supporto utilizzato per sospendere un array di altoparlanti che non sia fornito o associato a RCF è sconsigliato ed è sotto la responsabilità
di altri�
PRECAUZIONI DI SICUREZZA
1. Leggere queste istruzioni
2. Conservare queste istruzioni
3. Prestare attenzione a tutti gli avertimenti
4. Seguire tutte le istruzioni
5. Installare in conformità con le istruzioni del produttore
6. Utilizzare solo collegamenti e accessori specificati dal produttore
7. Tutte le precauzioni, in particolare quelle di sicurezza, devono essere lette con particolare attenzione in quanto forniscono informazioni importanti�
Non tentare mai di eseguire operazioni, modifiche o riparazioni non espressamente descritte nel presente manuale.
RCF S.p.A. raccomanda vivamente che questo prodotto sia installato solo da installatori professionisti qualificati (o aziende specializzate) che
possono garantire la corretta installazione e certificarlo secondo le normative vigenti.
NOTE IMPORTANTI: RCF declina ogni responsabilità in caso di applicazione di configurazioni non menzionate in questo manuale.
RCF S.p.A. si riserva il diritto di apportare modifiche senza preavviso per rettificare eventuali errori e/o omissioni.
Fare sempre riferimento all’ultima versione del manuale su www.rcf.it.

19
IT
1. STAFFA ORIZZONTALE H-BR TT 515
NOTE: la STAFFA ORIZZONTALE H-BR TT 515 è stata progettata per essere utilizzata solo col diffusore RCF TT 515.
PANORAMICA
H-BR TT 515
FISSAGGIO DELLA STAFFA AL MURO
Per il fissaggio della staffa a un muro assicurarsi di usare almeno i quattro fori agli angoli e quello centrale�
APPENDIMENTO DEL SISTEMA
Quando si appende il sistema utilizzare sempre il foro centrale; altri fori posso essere utilizzati in aggiunta a quello centrale se necessario�
STAFFA PER AMERICANA NON INCLUSA

20
IT
1. STAFFA ORIZZONTALE H-BR TT 515
NOTE: per l’installazione del sistema utilizzare sempre viti appropriate e idonee alla parete o al supporto..
FISSARE LA H-BR AL DIFFUSORE
Posizionare la staffa sul diffusore e fissarla con le due manopole (o bulloni) in dotazione�
Per variare l’inclinazione� allentare le manopole (o i bulloni) e inclinare il diffusore� Una volta scelta l’inclinazione desiderata stringere le manopole
(o i bulloni)�