
ENGLISH
ITALIANO
IMPORTANTE: Prima di utilizzare questo
prodotto, leggere attentamente le istruzioni
contenute in questo manuale, il quale è da
conservare per riferimenti futuri. Il presente manuale
costituisce parte integrante del prodotto e deve
accompagnare quest’ultimo anche nei passaggi di
proprietà, per permettere al nuovo proprietario di
conoscere le modalità d’installazione e d’utilizzo
e le avvertenze per la sicurezza. L’installazione e
l’utilizzo errati del prodotto esimono la RCF S.p.A.
da ogni responsabilità.
RCF S.p.A. Vi ringrazia per l’acquisto di questo
prodotto, realizzato in modo da garantirne
l’affidabilità e prestazioni elevate.
IMPORTANT NOTES: Before using this
product, please read this instruction manual
carefully and keep it on hand for future reference.
The manual is to be considered an integral part
of this product and must accompany it when
it changes ownership as a reference for correct
installation and use as well as for the safety
precautions.
RCF S.p.A. will not assume any responsibility
for the incorrect installation and / or use of this
product.
Il kit di ruote RCF modello RR 2601 è da
utilizzare esclusivamente per gli armadi
rack RCF modelli CR 2628 e CR 2642. Le
ruote RCF RR 2601 non devono essere utilizzate
con prodotti e accessori non specificati da RCF
S.p.A.
La RCF Spa non è risponsabile per un utilizzo
del prodotto diverso da quello espressamente
indicato.
RCF S.p.A. would like to thank you for having
purchased this product, which has been
designed to guarantee reliability and high
performance.
The RCF wheels kit RR 2601 main frame
is designed exclusively for CR 2628 and
CR 2642 RCF rack cabinets.
The RCF RR 2601 must not be used with any
product or accessory not specified by RCF
S.p.A.
RCF S.p.A. declines all responsibility for any
use of the product other than that expressly
indicated.
Smontare lo zoccolo
rimuovendo i quattro bulloni
Pls. remove the rack base from
CR 2628 or CR 2642 (4 screws to
be un-screwed)
Avvitare le quattro ruote facendo
attenzione di posizionare le due con il
fermo sulla lato anteriore
Screw the four wheels positioning the
two wheels with brakes on front of rack