RDL EZ-HRA3 User manual

INSTALLATION
MANUAL
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
RDL•659 6th Street •Prescott, AZ •USA 86301 •Sales: 800-281-2683 •928-443-9391
Tech Support: 800-933-1780 •928-778-3554 •RDL Europe Sales & Support: (31) 20-6238-983
www.rdlnet.com
Decades of Performance, Quality and Value
EZ-HRA3
10.4" Rack Adapter for 3 Increments of 1/6 Rack Width

www.rdlnet.com • ••www.rdlez.com
EZ-HRA3 with Base Plate Installed
EZ-HRA3 with Base Plate Forward
With the base plate screws removed from the
rear of the EZ-HRA3tray, the base plate slides
forward to facilitate installation of EZ products.
EZ product mounting screw holesEZ drawer mounting slots
Mounts All EZ A/V Products
Mounts EZ Storage Drawers
Base Plate Slides Out for Easy Product Mounting
Occupies One RU in 10.4¨ Rack
EZ-HRA3
Rack Adapter
EZ-RA6 BASE PLATE ASSEMBLY
•
•
•
•

STEP 1
Remove EZ-HRA3 base plate screws
and slide the base plate forward.
STEP 3
Slide base plate back into the
EZ-HRA3 rack mount tray and secure
the base plate using the three screws.
STEP 2
Mount EZ products, filler panels and
drawers to the base plate.
Base plate
screw holes
Base plate screws
Product mounting screws
DRAWER DETAIL: Insert the glide tabs into
the base plate slot(s).
FILLER PANEL DETAIL: Mount an EZ-FP1 Filler Panel to the base plate.
EZ PRODUCT DETAIL: Mount an EZ product to the base plate.
EZ-HRA3 base plate bottom view
PRODUCT INSTALLATION IN EZ-HRA3
EZ-HRA3 base plate
EZ-HRA3 tray

Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
EZ-CC6
EZ-DC2
EZ-DC1
EZ-FP1
EZ-SMB1 EZ-SMB2
OTHER SELECTED EZ SERIES MOUNTING ACCESSORIES
Component Chassis for 6 Increments of 1/6 Rack Width
Desktop Chassis 1/3 Rack Width
Desktop Chassis 1/6 Rack Width
Filler Panel 1/6 Rack Width
Surface Mount Bezel for 1/6 Rack Width Products Surface Mount Bezel for 1/3 Rack Width Products
EZ-SD2
EZ-SD1
Storage Drawer 1/3 Rack Width
Storage Drawer 1/6 Rack Width
Mounts in EZ-CC6 and EZ-RA6
Use EZ-SD1 and EZ-SD2 in Place of Filler Panel(s)
Drawers
Hold Adapters and Cables
Mount in EZ-CC6 and EZ-RA6
Complete accessory listing available at: rdlez.com
EZ-UCB2
Under-Counter Brackets 1/6 or 1/3 Rack Width
891-1663