Real Arcade Pro.V HAYABUSA User manual

REAL ARCADE Pro.V HAYABUSA
for Nintendo SwitchTM
Thank you for purchasing this product. Before using this product please read the instructions carefully.
After reading the instruction sheet, please keep it with you for reference.
Instruction Manual
Make sure that your Nintendo SwitchTM is updated with the latest system software.
・Caution
・Included
・Platform
・Layout
・How to connect
・How to carry
・How to extract the cable
・Stick Control Toggle Switch
・Nintendo SwitchTM / PC System Toggle Switch
・How to use the Turbo Functions
・How to change Turbo Speed
・Assign Mode
・Warranty
1
2
2
2
3
4
5
6
6
7
3
3
4
4

Included
Instruction manual x 1
Controller x 1
Caution
Please read carefully before using this product.
Keep this product away from children.
Do not drop or throw this controller.
Do not pull roughly or bend the cable of the controller.
Keep the controller away from dusty or humid areas.
If product needs cleaning, use only a soft dry cloth.
Do not use any chemical agents like benzine or thinner.
Warning. Not suitable for children
under 36 months. Small parts.
2
Platform
Nintendo SwitchTM / PC
Functions as PC controller through XInput. ※This product does not support analog input.
*Make sure that your Nintendo SwitchTM is updated with the latest system software.
System Requirements ・Windows 10 / 8.1 / 8 / 7 ・USB Port / Port USB

Layout
How to connect
Nintendo SwitchTM Dock
Please insert the USB connector of the controller into the USB port of the Nintendo SwitchTM Dock.
3
How to carry
16
17
18 19 20 21 22 23 24 25
1
5
2
3
48
10
7
9
13
14
15
6
11
12
Hold as shown in the image.
18
19
20
21
22
23
24
25
Direction buttons
Y Button
X Button
B Button
A Button
1
5
2
3
4
R Button
L Button
ZL Button
ZR Button
+Button
8
10
7
9
Cable storage box
Controller cable
Connector
Assign LED
TURBO LED
13
14
15
16
17
611
12
Assign Mode Switch
Stick Control Toggle Switch
Nintendo SwitchTM / PC System Toggle Switch
Tournament mode switch
TURBO Button
-Button
Left Stick Button
Right Stick Button
Capture Button
HOME Button

How to extract the cable
4
Nintendo SwitchTM / PC System Toggle Switch
Stick Control Toggle Switch
Stick control can be toggled to left stick, right stick control, and Directional Button.
This product's stick control toggle function is not guaranteed to work with all software.
* Please refer to software's instruction book.
This product does not work with Analog mode.
Directional
Button Right stick
Left stick
When connecting to the Nintendo SwitchTM system
When connecting to the PC system
The Nintendo SwitchTM / PC System Toggle Switch allows the product to be compatible with
the Nintendo SwitchTM / PC systems.
※Please set the Nintendo SwitchTM / PC System Toggle Switch to the desired system before connecting the product.
The controller cable is stored within the storage compartment found at the rear of the controller.
Open the cable storage as shown in the image. Use of excessive force to open the cover will cause it to come off.
Feed the controller cable through the hole as shown in the image and close the cover.
Please follow these steps in reverse when placing the cable back in the storage box.
Be careful not to get the controller cable caught when closing the cover.

How to use the Turbo Functions
The Turbo hold function allows continuous rapid fire without having to hold the button.
(Pressing the assigned button deactivates this).
The following buttons can be set to Turbo or Turbo hold mode:
A / B / X / Y / L / R / ZL / ZR / Left Stick Button / Right Stick Button / + Button /
Direction buttons (UP / DOWN / LEFT / RIGHT)
Direction buttons (UP, DOWN, LEFT or RIGHT) are not compatible with the Turbo hold mode,
and can only be set to Turbo mode.
OFF
ON
+
TURBO
Blinking LED light
+
TURBO
Turbo OFF
+OFF
TURBO - Button
By pressing the HOME Button, all Turbo function and Turbo hold settings will be deactivated.
When returning back to game play, you willneed to reset the Turbo and Turbo Hold setting.
The directional buttons up and down, or left and right cannot be assigned to TURBO hold simultaneously.
When stick control toggle switch is assigned to Left stick or Right stick, TURBO・TURBO Hold feature
cannot be assigned.
Turbo Function may not be compatible with all software titles. Please try adjusting
the Turbo settings or simply turn OFF TURBO.
Turbo Indicator
Setting method
Turbo Mode
OFF
(All buttons)
OFF
ON
+
TURBO
LED light Blinking
Turbo Hold
Press the button once more,
and the button will remain inTurbo (Turbo Hold).
OFF
Pressing the button again once more will
deactivate the Turbo function.
In the case that after deactivating the turbo function,
the turbo Indicator LED does not turn off, this means
that there is still a button set to Turbo/Turbo Hold.
If you forget which buttons you have set to Turbo mode,
deactivate them all and reassign, as you require.
Hold the TURBO Button and press the
SELECT Button
Hold down the Turbo button and then press
the button that you want to set to Turbo mode.
5

6
Assign Mode
Remap up to 3 buttons to the L, ZL, and + Button or disable button functionality.
※The + button can be remapped to the TURBO button if a different button has been assigned to the + button.
(A / B / X / Y / L / R / ZL / ZR / Left Stick Button / Right Stick Button / + Button)
1.
2.
3.
4.
Set Assign Mode Switch to A-ON.
Press the button to be remapped. (Select between L, LZ, + buttons.)
Press up to 3 buttons simultaneously to be remapped.
Set Assign Mode Switch to A-OFF.
● How to reset all buttons to default.
Press the HOME button after performing Step 1.
● How to reset selected buttons to default.
Press and hold 1 button for 3 seconds after performing Step 2.
● How to turn OFF button functionality on a selected button.
Press and hold the TURBO button for 3 seconds after performing Step 2.
※The above step can be performed even if the + button has been assigned to the TURBO button.
Assign Indicator turns ON. TURBO Indicator turns ON.
ASSIGN TURBO
TURBO Indicator turns ON.
TURBOASSIGN
TURBO Indicator begins to flash.
TURBO
ASSIGN
Assign Indicator turns ON. TURBO Indicator turns OFF.
Assign Indicator will turn OFF when set to default settings.
ASSIGN TURBO
How to change Turbo Speed
+
TURBO Right Stick Button
+
TURBO Left Stick Button
You can adjust the Turbo mode to 3 different speeds.
5 times/second → 12 times/second → 20 times/second
20 times/second → 12 times/second → 5 times/second

7
THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with theinstructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
The normal function of the product may be disturbed by strong Electro-Magnetic Interference.
If so, simply reset the product to resumenormal operation by following the instruction manual.
In case the function dose not resume, please use the product in another location.
PRODUCT DISPOSAL INFORMATION
[Bin symbol as on the right] Where you see either symbol on any of our electrical products,
batteries or packaging,it indicates that the relevant electrical product or battery should
not be disposed of as general household waste in Europe.
To ensure the correct waste treatment of the product and battery, please dispose of them
in accordance with any applicablelocal laws or requirements for disposal of electrical equipment/batteries.
In so doing, you will help to conserve natural resources and improve standards of environmental protection
in treatment and disposal of electrical waste.
The wires are not to be inserted into socket-outlets.
The packaging must be retained since it contains important information.
Please retain contact information for future reference.
The manufacturer reserves the right to change the product design or specifications without notice.
The image on the package may differ from the actual product.
HORI and HORI logo are registered trademarks of HORI.
Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall
be free of any defects in material and workmanship for a period of 90 days from the original date of purchase.
If the warranty claim cannot be processed through the original retailer
please address directly to HORI at [email protected]. Please visit http://stores.horiusa.com/policies/ for warranty details.