Realfiction Dreamoc User manual

1
Contents:
EU-declaration of conformity ! ! ! p. 2
Security precautions! ! ! ! p. 3
Product guarantee! ! ! ! p. 4
Correct Disposal! ! ! ! p. 4
When receiving the Dreamoc! ! ! p. 5
Product details! ! ! ! p. 5
To start using the Dreamoc! ! ! p. 6
To place a physical object in the Dreamoc! ! p. 6
To change the film content on the Dreamoc! ! p. 6
To clean the Dreamoc!! ! ! p. 6
Connecting the Dreamoc to externals! ! p. 6
How to assemble the stand (Optional) ! ! p. 7
Troubleshooting! ! ! ! p. 11

2
EU-declaration of conformity
EU-declaration of conformity
RealFiction ApS
Sankt Annæ Plads 13, 5
DK-1250 Copenhagen K
Hereby declares that the DREAMOC meets in Council Directive 2004/108/EC of December
15, 2005 on the approximation of Member States relating to electromagnetic compatibility.
Dreamoc is designed to display and promote products along with an electronic produced and
animated colour show.
Content and scope of the colour show is designed in an interchangeable memory card, and
worked with the client's wishes.
Dreamoc consists of a display unit that is mounted on a floor stand. Display unit can also be
mounted on the wall without using a stand, or placed on other stable surfaces.
Furthermore, the product is in accordance with Council Directive 2006/05/EF of December
12, 2006 (low voltage).
DK-1250 Copenhagen, date 27/4-2009
Clas Dyrholm
CEO, RealFiction ApS
It is important to read this manual before using the Dreamoc, and to follow
advices and instructions on safety, operation and general use to get the best
possible experience with your Dreamoc.
The Dreamoc is designed to showcase products and other objects in
combination with free floating 3D video animations.
If the Dreamoc is used for purposes other than described, the CE marking
and guarantee will only be valid after a written approval from RealFiction.
The Dreamoc is design protected in shape and form. RealFiction and
Dreamoc are registered trademarks owned by RealFiction ApS.

3
Security precautions
Installation of the Dreamoc must be done according to this manual, and must
be performed by an adult (Over 21 years).
The Dreamoc must be placed on a horizontal, stable and plane surface. The
floor stand must be fitted with sufficient ballast as described in this manual.
Do not install the Dreamoc in narrow passageways or other places where a lot
of people and equipment has to pass close by, thereby risking collisions that
might cause the Dreamoc to tip over causing human injuries and damage to
property.
The Dreamoc must be connected to a power outlet with current and voltage
as described in the product marking.
Turn off the Dreamoc before changing the Compact Flash card.
During service and cleaning the Dreamoc must be turned off, and the power
plug removed from the outlet. To disconnect the apparatus from the mains,
the plug must be pulled out from the mains socket, therefore the mains plug
shall be readily operable.
Handle the liquid crystal display (LCD) with care. The LCD is a very delicate
display device: Do not press its surface with excessive force, hit it or prick it
with a sharp object.
No sand or dust! Fine sand or dust entering the system could cause
malfunctions or defects.
No water or oil! Water or oil entering the system could cause electric shock,
malfunctions or defects.
The surface of the system will be slightly warm when using, but this does not
indicate a fault.
Be careful of unusual ambient temperature. Using the system in a place
where the temperature is over 40°C (140°F) or lower than 0°C (32°F) may
result in malfunction.
Do not place the Dreamoc in direct sunlight or near magnetism, corrosive gas
or ultrasonic humidifier. This could cause malfunction.
Do not expose the Dreamoc to soot or steam. Thick soot or steam could
damage the electrical components and cause malfunctions.
Keep the memory card out of reach of children to prevent swallowing.

4
Product guarantee
The manufacturers guarantee includes production, materials and function of
the supplied equipment. The guarantee is valid only if the supplied material is
used as described in this manual, and to the purpose to which it has been
designed.
The guarantee includes repair or replacement of malfunctioning components.
The guarantee is no longer valid if any unauthorized repairs or replacement of
parts have been performed on the product.
The LCD screen is a product of high precision technology. Out of the total
pixels 0.01% or less pixels may be out (black dots) or may remain lit as
coloured dots (red, blue, and green). This shows the limitations of the current
technology, and does not indicate a fault.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where
they purchased this product, or their local government
office, for details of where and how they can take this
item for environmentally safe recycling. Business users
should contact their supplier and check the terms and
conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.

5
When receiving the Dreamoc
Please be careful when unwrapping the Dreamoc. Especially the optic is
fragile.
Product details
1) Power socket. Insert power cable here. Unscrew and unmount the hatch for
access to internet, interactivity and sound options.
2) Hatch to product placement chamber.
3) Compact Flash card with film content.
4) On/off button.

6
To start using the Dreamoc
You simply plug it into the power outlet. AC 100-240V, 50-60 Hz, 240W. Wait
about 20 seconds. The Dreamoc is delivered with a pre-installed movie (6),
which will start automatically. The Dreamoc can operate 24/7, but if you would
like to turn off the power, open the back of the Dreamoc. This is done using
the key supplied with the Dreamoc. Inside you will find a switch on/off button
(7).
To place a physical object in the Dreamoc
When you would like to place a physical object inside the pyramided shaped
optic, you open the backdoor with the key supplied with the Dreamoc, open
the hatch (5) to the chamber, and place the object inside.
To change the film content on the Dreamoc
Start by turning off the power (7). You then open the back of the display with
the key supplied with the Dreamoc. You can now see the compact flash card
in the player (6). To exchange the card, take out the first flash card and insert
the new card in the player with the label facing upwards. Do not use
excessive force when inserting the card. Afterwards you close the Dreamoc
and turn on the power (7). Wait about 20 seconds and the Dreamoc will start
showing the new content.
!!! We recommend keeping a backup copy of your Dreamoc content, either on
a computer or on a backup CF card.
To clean the Dreamoc
The transparent pyramid shaped optic is made of plastic and should only be
cleaned with a damp soft cotton cloth moistened with water to avoid scratches
on the surface. The surface is hard coded, but will still need to be handled
with care.
!!! We recommend that you only use regular PH neutral water. Avoid using
chemicals and sponges. Never use stump objects to remove dirt from the
optic.
Connecting the Dreamoc to externals (from series 3)
The Dreamoc can be connected to the internet, for remote access and/or
automated content updating features. It is also possible to connect external
speakers, as well as interactivity accessories such as touch buttons and
proximity sensors. These connections can all be reach through the small wire
hatch (3) in the bottom of the Dreamoc housing.

7
How to assemble the stand (Optional)
To avoid damage or scratches, it is a good idea to assemble the stand on top
of the open packaging.
1) Apply the bolts to the adjustable feet, and mount the feet from the flat side
of the base.
2) Mount plate clips on all 4 sides as shown.

8
3) Mount the front and back panels on the base as shown. Do not tighten the
screws completely yet.

9
4) The side panels can now be attached. The panels attach when slided
towards the base. Mount the rest of the screws and tighten all screws.

10
5) Turn the assembled stand around, and you should be ready to mount the
Dreamoc display.

11
Troubleshooting
Problem (General)
Solution
No power.
- Make sure the AC outlet has power.
- Check that the on/off button.
- Open the bottom chamber and check
connections.
LED lamp is off or
blinking.
- Check wire connections from chamber through
LED driver to LED lamp.
- Replace driver.
Film is lacking or not
playing at all.
- Take out, format and reload the CF card.
- Replace the CF card with a new one.
- Check that the screen and player has power
and is turned on.
The video images is out
of scale/alignment.
- Please check that the content has been
produced according to the Dreamoc content
manual.
- Ensure that the screen has not been set to
“4:3” mode, or any other manual position
settings.
- In case the player has been adjusted
manually, make sure that display mode is set
to “4:3”, and output mode is VGA/1024x768.