CTA PAD-UAM User manual

Specifications
•
•
•
•
•
•
•
•
•
•
Product weight: 1.10 lbs
Device holder adjustment: 4.7" to 8.2"
Loading weight capacity: <= 2.20 lbs
C-clamp adjustment: 0.27" to 1.49"
Full height (from base to center of holder): 18"
Package Contents
2-In-1 Tablet holder Wall Stand - Black/White
Safety information:
Do not wash with hot water
Do not place the sucon grip on a rough or uneven surface
Do not place the sucon grip on a surface prone to vibraon or movement
Keep out of reach of children
C-clamp
Sucon cup
Wire clip (x4)
3-in-1 allen key
•
•
•
•
•
Installaon Guide
Product Layout
6.89"
9.92"
4.53"3.94"
11.61"
4.72"~8.27"
Key Features & Benefits
•Full moon arculang tablet/smartphone
desktop mount frees you from holding the
device to maximize your comfort while
reading arcles or watching videos
•Retractable holding bracket expands up to
8.2" with side openings allows easy device
installing/removing and cable connecon
•Fits most 7" to 12" tablets, including iPad,
iPad Mini, iPad Air and Samsung Tab series
•Supports mul-direcon 360°rotate, swivel,
and lt for the best ergonomic viewing
posion
•Arculang aluminum arm allows up to
13" height adjustment
•Includes both c-clamp and heavy-duty sucon
cup for easy and secure installaon onto most
surfaces without drilling. Convenient C-clamp
knob accessible from the top for easy setup
•Protecve pads fully integrated into device
holder and clamp protects device from
scratching, falling or slipping
PAD-UAM
Ultra-Light Arm Mount with
Clamp and Suction Bases
for Tablets and Smartphones

Installation Instructions
C-clamp Mount Setup
1. Turn the C-clamp screw counter-clockwise unl
the opening is wide enough to fit around desk or
table edge.
2. Turn C-clamp screw clockwise to ghten and affix
C-clamp to desk or table edge.
3. Slide the arm mount into the top of the C-clamp
and align the holes.
4. Insert the arm mount fastener screw and turn
clockwise to ghten.
clamp screw
fastener screw
fastener screw
Suction Mount Setup
1. With the semi-circle sucon lock in vercal
posion, place the sucon grip firmly against
surface.
2. Fold the semi-circle sucon lock into horizontal
posion to lock the sucon grip in place.
3. Slide the arm mount into place on the top of
the sucon grip and align the holes.
4. Insert the arm mount fastener screw and turn
clockwise to ghten.
Adjustment & Cable Management
Adjusting the Arm Mount:
Adjust to the desired poson using the included 3-in-
1 allen key.
3mm
230o
180o
300o
360o
360o
180o
3mm
2.5mm
2.5mm
2.5mm
3-in-1 allen key
4mm
Device Holder:
Adjust the width to fit your tablet or smartphone.
Cable Management System:
Arrange the cables into the cable covers and down
the tube using the included wire clips.
The sucon grip will accumulate dirt and dust with regular use and should be cleaned with
cold water every 2 months. This will ensure that the sucon grip maintains full strength.
[email protected]