Rear view safety RVS-6139Q User manual

1

What’s in the Box?
System connects to four (4) cameras
• 1 DIGITAL 9" T T LCD Quad View Color Monitor with universal
mount/stand and wire
• 2 66' Extension Cables for Backup Cameras
• 2 33' Extension Cables for Side Cameras
• 1 Remote Control
• 1 Power Connection Wire
• 1 Screw Kit for installation

3
Table of Contents
Introduction...................................................................................................4
Safety Information ..................................................................................5-7
Before Beginning Installation...................................................................8
Installation Guide.........................................................................................9
Wiring Camera & Monitor.................................................................10-11
Installing the Monitor ..............................................................................12
Installation Diagram .................................................................................13
Monitor Operation.....................................................................................14
Splitting & Splicing ...................................................................................15
Positioning.................................................................................................. 16
Power Harness ............................................................................................17
Monitor Dimensions..................................................................................18
Monitor Specifications.............................................................................19
Camera Dimensions...................................................................................20
Camera Specifications..............................................................................21
Camera Dimensions...................................................................................22
Camera Specifications..............................................................................23
Troubleshooting..........................................................................................24
Warranty.......................................................................................................25
Disclaimer ....................................................................................................26

Rear View Safety
4
Introduction
Congratulations on purchasing a Rear View Backup Camera
System! With this manual you will be able to properly install and
operate the unit.
The Backup Camera System is intended to be installed as a
supplement aid to your standard rear view mirror that already
exists in your vehicle. The Backup Camera System should not be
used as a substitute for the standard rear view mirror or for any
other mirror that exists in your vehicle.
In some jurisdictions, it is unlawful for a person to drive a
motor vehicle equipped with a TV viewer or screen located for-
ward of the back of the driver’s seat or in any location that is
visible, directly or indirectly, to the driver while operating the ve-
hicle.
Please read all of the installation instructions
carefully before installing the product. Improper
installation will void manufacturer’s warranty.

5
Reverse With Confidence™
Safety Information
Please read the entire manual and follow the instructions and
warnings carefully. ailure to do so can cause serious damage
and/or injury, including loss of life. Be sure to obey all applica-
ble local traffic and motor vehicle regulations as it pertains to
this product. Improper installation will void manufacturer’s
warranty.
USAGE
•The Rear View Camera System
is designed to help the driver
safely detect people and/or
objects helping to avoid
damage or injury. However,
you the driver, must use it
properly. Use of this system is
not a substitute for safe,
proper or legal driving.
•Never back up while looking
at the monitor alone. You
should always check behind
and around the vehicle when
backing up, in the same way
as you would if the vehicle
did not have the Rear View
Camera System. If you back
up while looking only at the
monitor, you may cause
damage or injury. Always
back up slowly.
•The Rear View Camera Sys-
tem is not intended for use
during exstensive back-up
maneuvers or backing into
cross traffic or pedestrian
walkways.
•Please, always remember,
the area displayed by the
Rear View Camera System is
limited. It does not display
the entire panorama that is
behind you.

Rear View Safety
6
INSTALLATION
•Electric shock or product
malfunction may occur if
this product is installed
incorrectly.
•Use this product within
the voltage range specified.
ailure to do so can cause
electronic shock or product
malfunction.
•Take special care when
cleaning the monitor.
•Make sure to firmly affix the
product before use.
•If smoke or a burning smell
is detected, disconnect the
system immediately.
•Where the power cable may
touch a metal case, cover the
cable with a friction tape. A
short circuit or disconnected
wire may cause a fire.
• While installing the RVS
System be careful with the
wire positioning in order to
avoid wire damage.
•The RVS System should only
be used when the
vehicle is in reverse.
•Do not watch movies or
operate the monitor while
driving; as it may cause an
accident.
•Do not install the monitor
where it may obstruct drivers
view or obstruct an air bag
device.
•Dropping the unit may cause
possible mechanical failure.
Safety Information

7
Reverse With Confidence™
Safety Information
IN NO EVENT SHALL SELLER OR MANU ACTURER BE
LIABLE OR ANY DIRECT OR CONSEQUENTIAL DAMAGES O
ANY NATURE, OR LOSSES OR EXPENSES RESULTING ROM
ANY DE ECTIVE PRODUCT OR THE USE O ANY PRODUCT.
If you have questions about this product, contact:
Customer Service:
Rear View Safety
1797 Atlantic Avenue
Brooklyn, NY 11233
Tel: [phone]

Rear View Safety
8
Before Beginning Installation
Before drilling please check that no cable or wiring is on the
other side of the wall. Please clamp all wires securely to reduce
the possibility of them being damaged while vehicle is in use.
Keep all cables away from hot or moving parts and electrical
noisy components.
We recommend doing a benchmark test before installation
to insure that all components are working properly.
Step 1: Choose the monitor and camera locations.
Step 2: Install all cables in vehicle, when necessary a 0.8 (20mm)
hole should be drilled for passing camera cable through vehicles
walls. Install split grommets where applicable.
Step 3: Once all cables and wiring have been properly routed,
perform a system function test by temporarily connecting the
system. If the system seems to not be operating properly see
troubleshooting (page 17).
Before Beginning Installation

9
Reverse With Confidence™
Installation Guide
Camera Installation
1. Attach camera bracket close to rear marker lights, centered on vehicle.
2. Camera: Drill a 20mm (0.8in) diameter hole into vehicle body near the camera and
bracket. Insert camera cable into vehicle (be careful not to kink cable) and fit grommet
into hole. Apply sealant around grommet to increase resistance to water penetration.
Connect camera to the camera extension cable which runs inside the vehicle.
3. eed as much cable as possible into vehicle & clamp securely. This reduces the pos-
sibility of cable being hooked or snagged. The aviation camera cable uses aircraft
grade connectors which means the camera cable can be exposed to all weather ele-
ments.
4. Attach camera to bracket using screws provided and adjust the angle.
Wiring Camera
5. The power harness on this unit has 4 camera ports (BLUE-BACKUP, YELLOW-LE T,
BROWN-RIGHT, and BLACK- RONT.)
6. Each camera should be connected to its corresponding port. All that is needed for
the system to work is to connect the POWER (red) to 12V and the GROUND (black).
7. The camera and monitor can always be activated by manually pushing the power
button on monitor. This is in addition to utilizing the positive triggers.
8. As you may have noticed, there are also 3 multi-colored wires (blue, brown, yellow).
These are trigger wires, and when they are energized (12V) they will turn on their cor-
responding channel. The Blue wire will also turn on gridlines and sound.
9. The camera system can be wired to be powered “ON” the entire time the vehicle is on.
This is typical in RV and some commercial applications.

Rear View Safety
10
Installation Guide
FInfrared technology built
into camera IRs are activated
automatically according to the
lighting conditions.
FWhen using the postive trig-
ger functions (blue, yellow &
white wires) each trigger
function needs to work on a
seperate 12V+ source i.e. the
Yellow and White wires can be
wired to a turn signal circuit
etc.
FGrid lines function can be
turned on/off by manually
from menu. (See page 13)
Monitor
1. To Attach the Pedestal mount to the dashboard or to the headliner use self-tapping
screws and/or the adhesive pad.
2. Attach monitor to mount, and adjust mounting angle to allow optimum driver
viewing comfort. (see figure 1.1 on page 11)
Note: If connecting power
directly to battery, the camera
is always ON and therefore can
drain battery. Therefore it is
recommended to connect
power to an ignition switched
accessory power source.

11
Reverse With Confidence™
Installing the Monitor
Figure 1.1 Figure 1.4

Rear View Safety
12
Installation Diagram
1. Red (power+)
2. Yellow (Left)
3. Brown (Right)
4. Blue (B ck)
5. Bl ck (Ground)
Camera Camera Camera Camera
1
33ft Extension C ble
2
3
4
5
FUSE
Monitor c ble
33ft Extension C ble
66ft Extension C ble
66ft Extension C ble

13
Reverse With Confidence™
Monitor Operation
P WER
N / FF
MENU/
SELECTI N
BUTT N
CAMERA
SELECTI N
“-”
D WN
“+”
UP
R TATE
IMAGE
(Back/Exit
when in Menu
Mode)
•To turn on the monitor, press “POWER” button
•To get to the menu, press “MENU” and use arrows to choose your settings
•To display options press “MENU”
•To adjust brightness, press “MENU”. Use arrows to choose desired camera and press
“MENU” to select. Once selected, use arrows to set the brightness
•To adjust contrast press “MENU”. Use arrows to choose desired camera and press
“MENU” to select. Once selected, use arrows to set the brightness
•To adjust saturation press “MENU”. Use arrows to choose desired camera and press
“MENU” to select. Once selected, use arrows to set the brightness
•To set distance grid lines press “MENU” to select. Once selected, use arrows to
choose off or on and press “MENU”
•To set auto power press “MENU” to select. Once selected, use arrows to choose off or
on and press “MENU”.
•To reset press “MENU” to select. Once selected, use arrows to choose yes or no and
press “MENU”.
•To return to previous press “REV” when in menu
•To rotate screen press “REV”
•To adjust the volume press “UP” and “DOWN” buttons
•To toggle between cameras/display modes press "V1/V2" Choose from Single/Dual/
Triple/Quad/H Mode/POP

Rear View Safety
14
Splitting & Splicing
1. Red (-12-24V)
2. Green (video back)
3. Blue (trigger back)
4. Brown (trigger right)
5. Yellow (trigger left)
6. White (audio)
7. Light blue (video front)
8. Gray (video right)
9. Pink (12V)
10. Purple (Audio out)
11. Black (GND)
12. Green (Video out)
13. range (left)

15
Reverse With Confidence™
Positioning

Rear View Safety
16
Power Harness
Blue - B ck
Brown - Right
Yellow - Left
Red - Power 12V+
Bl ck - Ground 12V-
DESCRIPTIONS
Red (power+)
Yellow (Left)
Brown (Right)
Blue (B ck)
Bl ck (Ground)
FUSE
Monitor c ble

17
Reverse With Confidence™
Troubleshooting
Monitor Displays Blue Screen & Displays No Signal
•Do a hard reset, unplug all
cables and power cables and
leave them out for 1 minute
and then re-connect them.
•Check to ensure that the con-
nection to the camera is tight.
•Verify camera cable is plugged
into port labeled Backup Camera
• Verify that the blue positive
trigger on power harness is
put to power 12v+.
If the problem still persists, ver-
ify that alternate ports work. If
alternate ports do not work, re-
move Blue Trigger wire from
12V+ and select alternate chan-
nels.
Monitor Will Not Power-Up (no backlight on power button)
•Check fuse
•Check 12v+ to monitor
•Check ground connection
No Image On Screen
•Verify camera is on correct
camera input
•Verify cable is connected to
monitor
•Verify camera is connected to
cable
•Connect known working
camera and cable to monitor.
•Verify Blue trigger is receiving
power
Audio on Camera
•Verify chosen camera has audio
•Verify volume setting
•Confirm that the Blue audio
trigger is connected to 12v+

Rear View Safety
18
Monitor Dimensions
6”
9”
power
video select
down/up
menu
mirror/
normal
image
Power
n/ ff
Menu/
Selection
Button
Camera
Selection
Down Up
Image
Rotation
(Exit in
Menu
Mode)

19
Reverse With Confidence™
Monitor Specifications
TFT LCD Digital Monitor
Screen Size 9”
Dot Resolution 800Hx 3 (RGB) x 480V
Display ormat 16:9 / 500:1
Display Brightness 400cd/m2
Viewing Angle U:50° / D:60° / R:70°
Video Input 3 channel
Video Source 1Vp-p, 75Ω
Power Supply DC 12V-24V (+/- 10%)
Power Consumption 5W
Operating Temperature -30°C ~ +80° C
Video System Auto NTSC/PAL
Overall Dimensions 9”Lx 5.25”Hx 1”D
Weight 400G
Impact Rating 5G
Dot Pitch 0.192Hx 0.1805V
Sync System Internal

Rear View Safety
20
Warranty
One Year Warrant
Rear View Safety, Inc. warrants this product against material defects
for a period of one year from date of purchase. We reserve the right
to repair or replace any such defective unit at our sole discretion.
Rear View Safety, Inc. is not responsible for a defect in the system as
a result of misuse, improper installation, damage or mishandling of
the electronic components. Rear View Safety, Inc. is not responsible
for consequential damages of any kind.
This warranty is void if: defects in materials or workmanship or damages result from
repairs or alterations which have been made or attempted by others or the unautho-
rized use of nonconforming parts; the damage is due to normal wear and tear, this
damage is due to abuse, improper maintenance, neglect or accident; or the damage is
due to use of the Rear View Safety, Inc. system after partial failure or use with im-
proper accessories.
Warrant Performance
DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR Rear View Safety
PRODUCT EXHIBIT A DE ECT IN MATERIAL OR WORKMANSHIP, SUCH DE ECT
WILL BE REPAIRED WHEN THE COMPLETE Rear View Safety, INC. PRODUCT IS
RETURNED, POSTAGE PREPAID AND INSURED, TO Rear View Safety, INC.
OTHER THAN THE POSTAGE AND INSURANCE REQUIREMENT, NO CHARGE
WILL BE MADE OR REPAIRS COVERED BY THIS WARRANTY.
Warrant Disclaimers
NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE
ABOVE WARRANTY IS MADE WITH REGARD TO THIS Rear View Safety, INC.
Rear View Safety, INC. DISCLAIMS ANY IMPLIED WARRANTY OR MERCHANT-
ABILITY OR ITNESS OR A PARTICULAR USE OR PURPOSE AND ALL OTHER
WARRANTIES IN NO EVENT SHALL Rear View Safety. INC. LIABLE OR ANY IN-
CIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OR OR ANY
COSTS, ATTORNEY EES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A
CONSEQUENCE O ANY DAMAGE TO, AILURE O , OR DE ECT IN ANY PROD-
UCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS OR LOSS O PRO ITS.