RecorderGear AC80W User manual

www.recordergear.com
RecorderGear™ and respective logos are trademarks of
Teton Webstores LLC ©2017 ALL RIGHTS RESERVED
USER MANUAL

MID: AI-IP008-2
In order to comply with 18 U.S. Code § 2512 federal law, the audio
recording function is turned off by default on the AC80W. To use
this device 100% legally within the USA, you must record video with
audio recording turned off . If you are located in a country or a part of
a government entity where this law does not apply, you can enable
the audio recording function within the settings menu. RecorderGear
products are sold NOT for illegal use and are sold for their intended
legal use only. RecorderGear will not be held liable for any illegal use
of this product.
1 Year Warranty
All RecorderGear™ brand products are backed
by our 1 Year Warranty. For full details visit
www.recordergear.com.

1 Getting Started
2 Insert/Eject Micro SD Card
3 Power On/Off
4 Video Recording-Continuous/Motion Detection
5 Access Saved Recordings
6 Download “Pro iCam” APP
7 Connect iOS/Android device to AC80W Wi-Fi signal
8 Connect AC80W to Home/Business Wi-Fi
9 Understanding the “Pro iCam” APP
10 AC80W Live Video Mode/ Settings
11 AC80W Settings Menu
12 Device settings
13 Changing AC Adapter Connector Prongs
14 Troubleshooting
15 Specs
5
6
7
8
9
10
10
13
17
19
22
24
28
29
30
Table of Contents

5
1Getting Started
Please follow the instructions in this section before
proceeding to other sections.
A. Visit the App Store for iOS devices or Google Play Store for
android devices.
B. Search for the APP by typing “Pro iCam” in the search bar.
C. Download and install the APP on your iOS/Android device.
D. Locate the camera UID on the back sticker of your AC80W.
E. Your AC80W camera default password is [8888].

6
2Insert/Eject Micro SD Card
The AC80W can support up to a 128GB micro SD card.
A. Insert Micro SD card:
1. Unplug your AC80W if plugged into a power outlet.
2. Insert Micro SD card and push down until it clicks in.
B. Eject Micro SD card:
1. Unplug your AC80W if plugged into a power outlet.
2. Push the card in until it clicks and ejects.

7
3Power On/Off
A. Power On your AC80W:
1. Insert a micro SD Card.
2. Plug your AC80W into a 110V-240V power outlet.
3. Your first time using the AC80W, please allow 3 minutes
for it to power on and set up.
NOTE: For approximately 50 seconds, the LED indicator light
will flash several times indicating set up after which the LED
indicator light flashes blue indicating recording has started.
B. Power Off the AC80W:
To power off, unplug your AC80W from the power outlet.

8
The AC80W can record video continuously or only when
motion is detected.
A. Start video recording - Continous:
1. Power on your AC80W.
(See section 3-A: Power On your AC80W)
2. Wait approximately 50 seconds and video recording will
automatically begin in continuous recording mode.
NOTE: The LED indicator light flashes blue while recording.
This indicator light can be turned off using the app.
(See section 10-B-4)
B. Start video recording - Motion Detection:
Motion detection can be activated using the app by
4Video Recording - Continuous /
Motion Detection

9
choosing a motion sensitivity and selecting “OK”.
(See section 12-A-1: Motion detection Sensitivity)
C. Stop video recording:
To stop video recording, unplug your AC80W from the
power outlet.
5Access Saved Recordings
A. Using a PC:
1. Eject the micro SD card from your AC80W.
2. Insert the micro SD card to a computer via the SD card
slot using a card reader.
3. Open the removable disk/drive that appears on the
desktop.
B. Using the Pro iCam App: (See section 9-A-5&6)

10
6Download “Pro iCam” APP
A. Visit the App Store for iOS devices or Google Play Store for
android devices.
B. Search for the APP by typing “Pro iCam”.
C. Download and install the APP on your iOS/Android device.
A. Download and install the Pro iCam APP on your iOS/
Android device. (See section-6: Download “Pro iCam” APP)
B. Locate the camera UID on the back sticker of your
AC80W.
C. Power on your AC80W.
(See section 3-A: Power On your AC80W)
7Connect iOS/Android device to
AC80W Wi-Fi signal

11
D. Allow 3 minutes for your AC80W to set up and
transmit Wi-Fi.
E. Open the Wi-Fi menu of your iOS/Android device
then select your AC80W camera UID from the Wi-Fi list. If
prompted, enter the default password [8888].
F. Open the Pro iCam APP and tap the search icon then tap
on “New device” to add a new online camera. (See Image 1)
G. On the “live Video”page, select the online camera. You
will be prompted to change your AC80W password. Select
“Change” and input a new password of your choice.
(See Image 2)
H. Start viewing live video by selecting the new online
camera on the “live Video” page.

12
Image 1
Image 2

13
8Connect AC80W to Home /
Business Wi-Fi
By connecting your AC80W Wi-Fi to your home/Business
Wi-Fi you will be able to remotely view live video. To link
your AC80W Wi-Fi to your Home/Business Wi-Fi:
A. Using APP:
1. Complete section 6A to 6G then proceed to the
instructions below.
2. Press the settings or gear icon to the right of online
camera on the live video page and select “Device Settings”
for iOS or “Advance Config” for Android. (See Image 3)
3. For iOS, press “WiFi Config” and select your Home/
Business Wi-Fi name. Enter your Home/Business Wi-Fi
password. (See Image 4)
4. Press “OK” to accept connection.

14
5. Your AC80W will reboot. Select “OK” .
6. Completely close out of the Pro iCam APP and wait for 40
seconds.
7. Open Pro iCam APP and view live video remotely from
any where.
Image 3

15
Image 4

16
B. Using PC:
1. Complete section 6A to 6G then proceed to the
instructions below .
2. Unplug your AC80W and take out Micro SD card .
3. Insert your SD card into your PC via the SD card slot .
4. Open the removable drive/disk .
5. Open the wifi.txt file.
6. In the txt file you will see “wifi:MY-WIFI pwd:WF-PWD”.
7. Replace the MY-WIFI with the name of your home/
business Wi-Fi (Ex. wifi:NeGEAR18).
8. Replace the WF-PWD with the password of your home/
business Wi-Fi (Ex. pwd:12345) .
9. Save the txt file as a plain text file in the root folder of the
SD card.
10. Eject the SD card from your PC and insert it into your
AC80W.
11. Power on your device and it will automatically connect
to the wifi you entered.

17
9Understanding the “Pro iCam”
APP
This section will help you understand the functions of the
APP and how they work.
A. Live Video Page: This page shows all camera and
camera status. To change the view from list to box previews,
select the four box icon located at the top left corner of
this page.
B. Add Camera: Alternative to section 7-F, to add a camera,
select the “+” icon —> select “Add new online Camera” —>
Image 5

18
select “search(LAN)” —> select ”New device”—> select “OK”.
C. Search: This also adds camera to live video page.
(See section 7-F)
D. Settings: Select this icon to modify device, delete
device, reconnect, and access device settings.
E. Live video page: This page shows all camera and camera
status. To change the view from list to box previews, select
the four box icon located at the top left corner of this page
—> select the “+” icon—> select an online camera from list.
F. Snapshot page: This contains all snapshot taken when
you tap the snapshot icon. Press and hold the picture for
more options. You can save snapshots to the album of your
iOS/Android device.
G. Record page: This contains recorded video saved on
APP and SD card. The cell phone icon contains recordings
made when you press the record icon on the “live video
view”. The micro SD Card icon contains all recordings made
if an SD card is inserted in your AC80W. Note all recordings

19
10 AC80W Live Video Mode/
Settings
A. Live Video:
1. Enter into the live video page .
2. Tap online camera you would like to view .
3. Your AC80W live video will appear
are saved to the micro SD Card. Only recordings or clips
made by pressing the record icon from the “live video view”
are saved to the APP although they are also saved on the
micro SD Card.
H. Alarm page: This page contains motion detection
alarms / notifications.

20
B. Live Video Settings (picture, landscape and labeled):
1. Brightness: Select this icon and slide across to adjust
brightness of recorded video. This makes changes to
recordings made to the micro SD card as well as recordings
made to the Pro iCam APP.
2. Contrast: Select this icon and slide across to adjust
the contrast of recorded video. This makes changes to
recordings made to the micro SD card as well as recordings
made to the Pro iCam APP.
3. Infrared: Tap this icon to activate or deactivate the
infrared capability of your AC80W. This makes changes to
recordings made to the micro SD card as well as recordings
made to the Pro iCam APP.
4. Indicator Light On/Off: Tap this icon to activate or
deactivate the indicator lights of your AC80W. This allows
for a more discreet monitoring.
5. Audio: Tap this icon to listen to record and listen to
sounds. This feature has been deactivated to adhere to