Redback ZH User manual

ZH
User Manual
Specifications
WM
ZH
ZH.6606W
Model
Capacity Width (mm) Depth
(mm) Height (mm) N.W./G.W. (kg)
20.1/21.4
6RU 370
Shelves
(pcs) Cage Nuts (sets)
110
ZH.6612W
ZH.6618W
12RU
600 600
637 28.7/30.2
36.2/37.918RU 903
2
2
10
20
WM.6406
Model
Capacity Width (mm) Depth
(mm) Height (mm) N.W./G.W. (kg)
15.1/16.3
6RU 370
Shelves
(pcs) Cage Nuts (sets)
110
WM.6412
WM.6418
12RU
600 450
637 22/23.4
28/29.618RU 903
2
2
10
20
WM.6409 9RU 500 18.7/20 110
ZH.6609W 9RU 500 24.6/26 110
Warning
Max loading is 60Kgs.
Warning
When using with Swing Frame or in ZH configuration:
Ensure all hinges are tightly secured.
Alignment studs are installed on opposite side from hinges.
Keep cabinet locked to swing frame when not in use.
Do not load weight on hinges for extended periods of time.

Please read these instruction and check the contents of this kit carefully before
installation.
Contents included
SF (Swing Frame)
Ÿ1 x wall mount cabinet
Ÿ1 x swing frame
Ÿ1 x key lock
Ÿ5 x rubber cushions
Ÿ1 x earth cable
Ÿ2/3/4 (6RU / 9 & 12RU / 18RU) hinges and hex nuts sets
Ÿ1 x hex nut driver
Ÿ2 x alignment studs
Instructions
1. Remove mounting plate, back panel and discard.
2. 2/3/4 (6RU / 9 & 12RU / 18RU) hinges and hex nuts sets to Redback rack.
3. Fix key lock to rack and attach lock arm in unlocked position.
4. Install rubber cushions for soft closing.
5. Mount swing frame correct side up to the redback rack via hinges.
6. Install earth cable between Redback rack and swing frame.
7. install alignment studs provided and ensure cabinet and cabinet swing frame
is locked when not in use and remove key.
Structure
WM
Ÿ1 x Redback rack
Ÿ1 x rear panel
Ÿ1 x mounting plate
Ÿ20 x cage nuts
WM
ZH
Hex nut driver Hinge
Swing frame
Alignment stud
Fan tray
Rear panel
Mounting plate
Fan tray