StudioDesk FRTWBL01 User manual

FRTWBL01 Rack Tower Black
FRTWH01 Rack Tower White
Please assemble your product on soft
surface to avoid scratches and damages
on lacquer.
!
www.studiodesk.net

The Desk You Deserve
ThankyouformakingStudioDeskyourdeskofchoice!
Before beginning assembly of your stand, let’s get familiar with the parts you have received in your package.
Please match the corresponding numbers on this page with the drawings.
1. Side panels
2. Top panel
3. Bottom panel
4. Pull out shelf
5. Slides
6. Connecting back
panels
7. Front accent panel
8. Bottom connecting
panel
Hardware
Parts
Tools needed (Not included)
9
Srews for wood
10
M6 Screw
40 pcs
11
4
1
Casters
Brackets
13
LR
23
5
6
7
8
10pcs
Rackrails10U
4pcs
4pcs
16pcs
Dowels
12
16pcs
a,b

1 Step One
Insert dowels (12) into the holes as
shown in the illustration. Use a
rubber hammer if needed. Do that
on both side panels.
Fix casters to the bottom panel
using screws for wood (11)
www.studiodesk.net
2
1
1
7
4
6
8
L
R
7
Connect all parts together on wooden
dowels and Fix it using M6 screws (9) and
metal brackets (13)
Install accent mask last by pushing it on the
dowels.
Use drop of the glue for wood if you want to
fix it permanently.
NOTE! If glue is used, dissemble will not be
possible.
Step Two
2
3
6
b