Redgear Zonik User manual

ZoniK GAMING CONTROLLER
QUICK START GUIDE
Thank you for purchasing Redgear Zonik wireless gaming controller for PC

1. General Information
This gamepad is a plug and play device, but some games may need to install additional
software to make its function fully active. This gamepad support PC installed with Windows
XP/win7/win8/win10.
2. Mode and LED Indicator
PC Platform: Press MODE button 8 seconds to switch between modes
(By Default the controller is always on Xinput mode when plugged into the USB)
1) Xinput mode：■■□□ LED 1 + LED 2
2) Press mode button to switch from Xinput to Directinput analog mode )
Directinput Analog mode：■□■□ LED 1 + LED 3
3) Press mode button once to switch from Directinput Analog mode to Directinput digital
mode.)
Directinput Digital mode：■□□■ LED 1 + LED 4
4) To go back to Directinput Analog mode press mode button once.
5) To go back to Xinput mode press mode button for 8 seconds.
Troubleshooting
A. Gamepad not recognize/ not found/ no response
1. Check gamepad connection
2. USB port problem, change another USB port
3. Gamepad driver was not installed correctly, please reinstall or Please unplug and
restart computer.
4. Do not use high amp adapter
B. Gamepad cannot use in the game
1. Game platform didn’t support gamepad
2. Gamepad was not set in the game setting
C. No Vibration
1. Driver was not installed correctly
2. Game didn’t support vibration
Technical Specification
EN
USB Wired Gaming controller
Buttons: 15 pcs
Vibration: Yes
Cable length: 2M

Weight: ±230gr