Redsbaby Paloma User manual

INSTRUCTION MANUAL

PALOMA DRESSER

Contents

General instructions 3

Warranty information 4

Components and parts 6

Assembly instructions 7

Care and cleaning 17

WARNING:

DO NOT DRAG YOUR PALOMA FURNITURE ALONG THE GROUND, AS THIS MAY

RESULT IN THE LEGS BREAKING. TO MOVE, USE TWO PEOPLE TO LIFT AND

REPOSITION.

Warnings and safety precautions

Please read the following warnings and safety precautions thoroughly

before using your Redsbaby Paloma Cot. Incorrect assembly and use can

result in serious injury or death.

RECOMMENDED MATTRESS SIZE

This cot has been manufactured for use with a mattress which measures

700 mm wide by 1300 mm long and 120 mm in thickness. The width and

length are specied because it is important that the gaps between the

mattress and the sides and ends of the cot will not exceed 40 mm when

the mattress is pushed to one side or end, and 20 mm when the mattress

is centered in the cot. The thickness of the mattress has been specied to

ensure that the depth of the cot is greater than 500 mm with the mattress

base in the lower position to minimize the risk of a child climbing or falling

out of the cot.

WARNING

· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD

BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN

SIT UP.

· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL

THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE

TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE

BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING

WHICH WOULD POSE A RISK OF STRANGULATION.

· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS

THICKNESS SHOULD NOT EXCEED 120MM.

General Instructions

Thank you for choosing Redsbaby for your family.

This document contains important information and must be kept for future reference.

Please read thoroughly before commencing assembly of your Redsbaby PALOMA Dresser. It

is critical that you follow these assembly instructions in detail. Incorrect assembly and use

can be dangerous and result in serious injury or even death.

If there are any missing parts or you have any questions regarding assembly, please contact

us via info@redsbaby.com.au.

There may be slight variations in the design of your product to that shown in the images of

this instruction manual.

Redsbaby Pty Ltd

info@redsbaby.com.au

www.redsbaby.com.au

This product was proudly designed in Sydney, Australia.

Redsbaby is Australian owned and operated.

Warranty information

12 Month Warranty

The Redsbaby PALOMA Dresser comes with a 12 Month Warranty to cover against faults

in materials and workmanship when your products are used under normal conditions,

according to our user manuals and technical specifications.

Our goods come with guarantees that cannot be excluded under the Australian

Consumer Law. You are entitled to a replacement or refund for a major failure and

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to a major failure.

The 12 Month Warranty period starts from the date your product(s) are dispatched from our

warehouse. This includes products that are purchased via pre-sale (for example items that

are out of stock or newly launching products). Please remember that for a claim to be valid,

it must be made within the claims period.

There are a few circumstances under which the warranty is not valid including:

- defects resulting from improper care or use;

- normal wear and tear, including scratches to the cot frame;

- products that are purchased second hand or from an unauthorised distributor;

- faulty or incorrect assembly; and

- using a part or accessory that is not compatible with the product and/or not manufactured

by Redsbaby.

Please ensure you follow the assembly instructions, which can be found in this instruction

manual.

How To Make A Warranty Claim

Send an email to info@redsbaby.com.au to notify us of your warranty claim. To validate

your warranty claim we will require you to include in your email:

- a description of the warranty defect including photographs;

- your contact details;

- attached invoice with order number; and

- product batch number (the batch number is printed on a sticker that is located on the

back panel of the dresser).

We will respond to your warranty claim within 7 business days and depending on the nature

of the warranty claim, provide a replacement of the damaged part or arrange collection of

the product from your nominated address. Collection will take place on a business day (i.e.

not a public holiday or weekend within your state or territory) between 7am and 5.30pm.

Please take care to repack the product in secure and stable packaging to avoid any damage

occurring in the returns transit. We do not take responsibility for any damage that occurs

in transit. Once we have received your product we will inspect and confirm the reported

defect. We will then contact you with further information surrounding the repair such as the

estimated turn around time.

If you have any questions, you can contact us at info@redsbaby.com.au.

Components and parts

S1 x 38 S2 x 38 S3 x 2 S5 x 2S4 x 2

A x 1

D x 1E x 2

F x 1

I x 1

N x 2

G x 2

M x 4

J x 3

K x 3

L x 1

O x 2

C x 2

H x 1

P x 10 B x 4

Assembly instructions

WE RECOMMEND TWO (2) ADULTS ASSEMBLE THE PALOMA DRESSER.

Step 1

x 4

WARNING:

DO NOT DRAG YOUR PALOMA FURNITURE ALONG THE GROUND, AS THIS MAY

RESULT IN THE LEGS BREAKING. TO MOVE, USE TWO PEOPLE TO LIFT AND

REPOSITION.

WARNING:

THIS PACKAGE CONTAINS SMALL PARTS. KEEP AWAY FROM CHILDREN UNTIL

ASSEMBLED. STORE ALL PACKAGING AND EXCESS PARTS AWAY FROM A CHILD’S

REACH AS SOON AS THE PRODUCT IS ASSEMBLED.