Reer M2307BCC User manual

USER MANUAL
Thank you for purchasing our products.
The company is not responsible for any safety accidents caused by abnormal
operation of the product.
Please carefully read this User's Guide(in particular, precautions for safety) before
using this product .
COLOR VIDEO DOOR PHONE

Warning and Caution
Index
Monitor doorbells or CCTV cameras
Alarm clock and electronic calendar
Change attention message for automatic answering function
Delete single file or folder
Brightness/color/contrast adjust
Talking volume adjust
Incoming call answer
View photo, video, DVR and multimedia files
The function and name of each part
Wiring diagram
Installation method
Cable specification
Internal call among monitors
Family audio message
DVR function
Image Capturing
Features and main function
Package contents
Auto leaving message
1
3
4
4
6
8
9
10
11
11
11
13
14
14
15
17
17
19
System layout 5
Manual video recording
14
Operation guide 10
12
Broadcast function
Monitor listening
12
13
12

System main menu
Parameters of picture capturing/video recording/DVR
System settings
21
27
Specification
28
20
Version 1.0
Transfer visitor call to the telephone(for telephone module)
19

Page1
Warning and caution
Make sure to follow the instructions to prevent any danger or property losses.
Warning
Death or serious
injury is expected. It indicates prohibition of contact.
It indicates disassembly.
It indicates dos and don’ts.
It indicates prohibition.
It indicates that the plug should be pulled out from
the socket.
Do not put the plug in the
socket simultaneously.
It may generate abnormal
heat or cause a fire.
Do not connect to other
products while in use.
It may cause breakdown.
Do not forcibly bend the cord
or put a heavy object on the
product.
It may cause a fire.
Do not use water, thinner or
a detergent used to wash oil
products when you wash the
exterior.
Make sure to wash it by using
a dry cloth to prevent any
breakdown or electric shock.
Do not install the product in a
humid place.
It may cause an electric
shock or a fire.
Do not forcibly pull out the
cord from the socket.
If the cord is damaged, it
may cause a fire or an
electric shock.
Do not put the plug in the
socket with a wet hand.
It may cause an electric
shock.
Do not disassemble, repair
or modify the product.
It may cause a fire, an electric
shock or an injury due to
malfunction of the product.
Do not use AC circuit breaker.
It may cause an electric shock.
NO NO
NO
NO NO
NO
warning
warning

Page2
Caution
A injury or property
losses are expected. It indicates prohibition of contact.
It indicates disassembly.
It indicates dos and don’ts.
It indicates that the plug should be pulled out from
the socket.
It indicates prohibition.
NO
NO
NO
The socket holes
are lager than
usual.
If the socket holes are larger
than normal, do not put the
plug.
It may cause an electric shock
or a fire.
Make sure that dust or
foreign substances are not
gathered on the product.
Make sure to prevent foreign
substances from entering
the product.
It may cause a breakdown.
Do not put a heavy object on
the product.
It may cause a breakdown.
Do not disassemble the
product.
Avoid direct rays of the sun
or heating devices at a time
of installation.
Install the product in a flat and
stable place.
Otherwise, it may not function
properly.
Pull the plug if the product is
not used for a long time.
If the product generates
strange sound, make sure to
pull the plug immediately
and contact service center.
NO
CAUTION

Page 3
The function and name of each part
6
2
3
5
1
4
3
1
2
3
4
5
6
No.
Micro SD card slot
LCD
Microphone
Speaker
Home button
Item Function description
Enter system main menu
Indicator Power indicator

Page 4
Package contents
User m aunal
User manual Wall bracket *2 Expansion bolt
2*4 pin connector
(red/blue/yellow/
white)
4 pin connector
(white/blue/
white/blue)
Monitor Desiccant
2*M3.5*30
fixing screws Adaptor
5 pin connector
(red/blue/yellow/
white/brown)
MODEL LIST
Features and main function
7" color digital LCD, high definition
Touch screen
Hands free design, perfect intercom with clear voice
The optional multi-language friendly interface
8 polyphonic ring-tones switch freely
easy to operate
1.Features
2.Main function
Call transfer
“Don’t disturb” function
Broadcast function
Monitor listening
Lock control
Simple DVR function with motion detection
Auto leaving message
Alarm clock and calendar
Video & audio recording
Multimedia function: photo frame, music playing
Brightness, contrast, volume and color adjustable
Real-time monitoring to doorbell or CCTV camera
Make internal call to other monitors

Page 5
System layout
1.The port 2 connect doorbell panel
The system can maximum support 1 main monitor, 3 sub monitors, 2 door
panels and 8 CCTV cameras.
2.The port 2 connect the CCTV camera
The system can maximum support 1 main monitor , 1 door panels, 9 CCTV
cameras and 3 sub monitors .
Note: Based on the actual usage ,please refer set the port state. to P24
DOORBELL1
DOORBELL2
CCTV1 CCTV1 CCTV1
CCTV2 CCTV2 CCTV2
SUB MONITOR SUB MONITOR SUB MONITOR
MAIN MONITOR
CCTV1
CCTV2
Doorbell
CCTV1 CCTV1 CCTV1 CCTV1
CCTV2 CCTV2 CCTV2 CCTV2
CCTV3
SUB MONITOR SUB MONITOR SUB MONITOR
MAIN MONITOR

Page 6
Wiring diagram
SYSTEM DIAGRAM
Note: (a)Door panel unlock wiring: electronic lock 2+external power supply.
SYSTEM DIAGRAM
Solution1
ROOM2
ROOM3
P1
CCVT1
CCVT2
A D 1
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
G N D
PW R1
V D 1
ROOM1
a
P2
A D 2
G N D
PW R2
V D 2
Doorbell 2
electronic lock 2
A D
G N D
PW R
NO
CO M
V D
P6
G N D
+ 1 5 V
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
P2
A D 2
G N D
PW R2
V D 2
P6
G N D
+ 1 5 V
D A T A
P1
A D 1
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
G N D
PW R1
V D 1
P2
A D 2
G N D
PW R2
V D 2
P6
G N D
+ 1 5 V
D A T A
DoorBell 1
A D
G N D
PW R
V D
electronic lock 1
NO
CO M
CCVT1
CCVT2
CCVT1
CCVT2
CCVT1
CCVT2
CCVT1
CCVT2
P1
A D 1
G N D
PW R1
V D 1
D A T A
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
P2
A D 2
G N D
PW R2
V D 2
P6
G N D
+ 1 5 V
CCVT1
CCVT2
CCVT1
CCVT2
P1
A D 1
G N D
PW R1
V D 1
D A T A
ROOM4
AD: Audio
VD: Video
PWR: Power
GND: Ground
DATA: Communication
CCTV: CCTV camera

Page 7
Wiring diagram
Solution2
ROOM2
ROOM3
ROOM4
P1
CCVT1
CCVT2
A D 1
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
G N D
PW R1
V D 1
ROOM1
P2
A D 2
G N D
PW R2
V D 2
P6
G N D
+ 1 5 V
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
P2
A D 2
G N D
PW R2
V D 2
P6
G N D
+ 1 5 V
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
P2
A D 2
G N D
PW R2
V D 2
P6
G N D
+ 1 5 V
CCVT3
DoorBell 1
A D
G N D
PWR
V D
CCVT1
CCVT2
CCVT1
CCVT2
P4
CCTV1
CCTV2
G N D
G N D
P3
A D - 1
DATA
G N D
V D - 1
P2
A D 2
G N D
PW R2
V D 2
P6
G N D
+ 1 5 V
CCVT1
CCVT2
NO
CO M
SYSTEM DIAGRAM
electronic lock 1
D A T A
P1
A D 1
G N D
PW R1
V D 1
D A T A
P1
A D 1
G N D
PW R1
V D 1
D A T A
P1
A D 1
G N D
PW R1
V D 1
D A T A

1.Refer to relevant wiring diagram of the system you have chosen and ensure you
have the correct cable.
2.Determine the monitor installation position:
-suggest install at 1.5~1.6Meters;
3.Ensure no power supply connection before installation finished
4.Take off the bracket from the back of the monitor.
5.Install the bracket on the wall
6.Connect cables as per the wiring diagram indicated.
7.Fix the monitor onto the bracket.
8.Connect power when doorbell is installed.
SINGLE MONITOR INSTALLATION
Page 8
Installation method
150cm

Cable Specification
Cable specification
Our system has 1 solution to unlock the door: Unlock signal from doorbell
(The cable shield wire needs to be grounded)
When signal from the doorbell, cable specification is:
Distance between monitor and door station is less than 30 meters, RVV 4*0.3 mm
cable is available;
Distance exceed 30 meters,please choose professional cable
(recommend);
SYV-75-3+RVV
2x0.5mm
2
2
2
indoor monitor
outdoor panel
electronic lock
white White
Yellow Yellow
Blue Blue
Red Red
Green
Orange
+
-
12V
AD1
GND
PWR1
PWR
GND COM
NO
AD
VD
1
2
3
4
1
2
3
4
+
-
VD1
DATA
indoor monitor
White White
Yellow Yellow
Blue Blue
Red Red
Green
Orange
+
-
12V
AD1
GND
PWR1
VD1
PWR
GND COM
NO
AD
VD
1
2
3
1
2
3
outdoor panel
electronic lock
+
-
DATA
Page 9

Page 10
Operation guide
The system support five kinds of action types:
1.Click: In multimedia manager interface, click anywhere of blanked place
will pop up the related operation menu. Click again can hide the menu.
2.Left slide: Left slide can return to last menu/View last picture.
3.Right slide: Hide the menu in multimedia interface/View next picture.
4.Up slide: In system settings, up slide to next page.
5.Down slide: In system settings, down slide to last page.
Incoming call answer
When a visitor presses doorbell,all the indoor monitors in this house will chime
simultaneously, the screen will show INCOMING CALL. Click the icon to
talk with the visitor. If you want to unlock the door for the visitor, click the
icon, then DOOR UNLOCKED will show on the screen.
1.If there is another call incoming during conversation, SOMEONE IS VISITING
Hang up Call/Call
transfer
Monitor
switching
Function
adjust-
ment
Image
capturing
Video
recording
Icon des-
cription
When monitor is at answering or monitoring state, the below menu will
show on the right of the screen.
Unlock Answer

Page 11
Talking volume/ adjust
DOOR 2 will display, click the icon can switch to another visiting .
2.You can transfer your call to other monitors in the system while talking with
the visitor. If you want to transfer the call to others, click the can transfer
the call. (The words TRANSFERRING TO OTHER ROOMS will display).
At talking/intercom state. Click the icon to enter volume adjust screen, then
click or to adjust the volume .
Brightness/color/contrast adjust
When the screen is on, click the icon to adjust the volume first , then click
it again you can enter the BRIGHT/COLOR /CONT adjust screen,click or
to adjust the brightness, color and contrast .
Monitor doorbells/CCTV camera
At standby state, click to enter system main menu, then click the icon ,
you can view images from the connected doorbell/CCTV. Click the icon
again you can switch to other monitor channels. When monitoring the doorbell,
click the icon can change into (MUTE STATE). If the microphone is in
normal state, click the icon can open the door.
If you have more than one monitor (up to 4 monitors) in your house, you
can make below operations.

Page 12
Internal call among monitors
If you .
system main menu, then click the icon to start this function. If you have
more than 2 monitors connected together, you can click the target monitor NO.
on the screen to confirm the calling.
make intercom request for all monitors At standby state, click to enter
Broadcast function
This function allows you to broadcast information for all monitors in your house.
At standby state, click to enter system main menu, then click the icon ,
the screen will show BROADCAST REQUEST, the monitor in other rooms will
show BROADCASTING . Now you can make a broadcast .
Note:
a: When monitoring, the user can hear the sound from the being monitored
room, but the people at the be-monitored intercom room can not hear the voice
from monitoring intercom room.
b: Monitor listening function is available only when BE MONITORED function
is enabled in the target monitor. Please check the system setting menu to see
how to turn on the BE MONITORED function.
Monitor listening
To activate listening of another monitor, click to enter system main menu,
then click the icon . If you have more than 2 indoor monitors, click the target
monitor NO. on the screen to confirm.

Page 13
Image capturing
1.Automatic image capturing: "Auto capture quantity"should be set as 1,2 or
3 in the SYSTEM SETTINGS, The system can automatically take and save
pictures when the visitors make calls.
2.Manual image capturing: When monitor is at answering and monitoring
state,click the icon to capture images manually. The words IMAGE
CAPTURED will show on the screen.
DVR function
Automatic DVR function :Enable DVR in SYSTEM SETTINGS --> DVR SET
TINGS to activate that function. You can record video from any doorbell or
CCTV camera in your system at set time.
Note:(a) Sound doesn't record in DVR function.
(b)To act DVR function well,pls use the micro SD with capacity 8G.
(c)To get high quality video, We kindly recommend resolution of 640*480.
(d) When the start time and the end time are set as the same time ,the DVR
function will active in 24 hours immediately and last forever.
(g)For detail information of DVR function, please refer to P23,24.
-

Page14
Auto leaving message
This function let your visitors to leave a video message for you while nobody is at home.
You should activate AUTO LEAVING MESSAGE function in the SYSTEM SETTINGS
before leaving home. When the visitor presses call button on the door panel and
nobody answers before the chime time ends, visitor can hear a voice“Hello, no one is
at home at the moment, please leave a message after the tone” from the door panel
and have 20 seconds to leave a message for you .
Note: View and manage messages and more operation, please refer to P17.18.19.
Manual video recording
When at the answering and monitoring state, click the icon to record video
manually. Click the icon again to end the recording.
Note: View and manage video files. pls refer to P17.18.19.
You can record audio message to your family. At standby state, Click to go
to the system main menu, click the icon to enter message recording menu
as Figure 1.
Family audio message

Page15
Change attention for automatic answering function
When AUTO LEAVING MESSAGE is on, if nobody answers the call before
chime time ends, the visitor will hear a voice attention message:no one is
at home at the moment, please leave a message after the tone”? If the
user wants to change this attention message(BEGINNING TONE)into
their own sound, please take the following steps:
Go to the menu and record one audio message, then exit menu and enter
menu as Figure 2.
Click “RECORD” to start recording. When the recording finished, click “STOP”
to stop recording. If your message was recorded successfully, then click”EXIT”
to exit the recording menu.
Figure 1

Page 16
Figure 2
Click to choose the audio file you want to set as beginning tone, then click the
icon(Tone setting) to “CONFIG ATTENTION TONE ” menu as Figure 3.
Click the TONE TYPE to change the option to be USER TONE. Then click the
PLAY TYPE to change the value to be BEGINNING TONE .Also you can adjust
the attention tone volume. If you finished the above operation, click ACT to
confirm the setting. Same operation to change the ENDING TONE.
Figure 3

Page 17
Alarm clock and electronic calendar
1.Pls enable ALARM CLOCK SETTING in the SYSTEM SETTINGS.
2.At the set time, you can turn off the alarm by clicking the chime icon at the
left corner of the screen.
3.When Figure 4 displays on the screen, click the alarm clock (The left corner)
and the display time (The right corner), you can set the alarm clock and
calendar in the shortcut way.
4.Please refer to P25.26 for detailed settings.
View photo , video ,DVR and multimedia file
At standby state, press button to go to system main menu. If you have
unread files, there will be a number on the right corner of the icon with red
color, the number is the unread files’ quantity. All files names consists of the
date and time it was created, for example: 01-02-2012-02- 11:30:20,means
that files was created on 11:30:20,Feb, 1 st,2012. So it’s very convenient for
you to know the recording time and tell the different files.
Figure 4