REERAY R6 User manual

Bone Conduction Headset
USER MANUAL
R6

②
①Power on/off②“+”Next③ ”-“Previous
④Microphone⑤Indicator light
⑥Magnetic suction charging port
⑦Data transfer &charging cable
Packing list:
1.Headset*1
2.User manual*1
3.Charging cable*1
⑥
⑦
Please connect
correctly as shown !

Use Instructions
Power on /off:
Pairing Method:
How to switch between BT mode and MP3 mode?
How to charge the headphone ?
How to download or cancel the songs?
Press and hold the on/off button for 3 seconds until the indicator light
flashes white and blue.
*keep the headphone in the ranger of 1 meter if it’s the first boot pairing
*When the red and blue light flash alternately .it means the headphone
enters the automatic BT pairing mode.
*Open your smart device and find ”REERAY R6” from the BT list .Click
on the connection. And the blue light flash slowly when connected
successfully.
The headset is in Bluetooth mode by default.When the headset is on,press
the “power on”button twice in a row to switch to MP3 mode. The same
operation to switch to BT mode.
The battery capacity of the headphone will be displayed on the phone.
When the headset prompts "Low power", it indicates that the battery is
low, please charge the headphone in time.
The anti-dull magnetic suction charging port is designed to ensure proper
connection. If it does not automatically suction close, please check if it is
in the correct position.
Computer is connected to the headset through the magnetic adsorption
data cable, and the computer displays U disk in around 5 seconds later
you can download or delete the songs .

Basic Operations
BT MODE
Power on/off : Press and hold “on/off” for 3s
SIRI: Press and hold on “+” for 2s
Pause/play: Short press “on/off”
Next: Double Press “+”
Previous: Double Press “-”
Answer/ Reject Call: Short press “on/off”
Volume + /- Play: Short press “+” or “-”
Switch mode Double Press “on/off”
Pause/play Short press “on/off”
Volume+ Short press “+ “
Volume- Short press “-”
Next /Previous Double Press “+”/”-”
MP3 MODE
Blue and red light flashing: Pending for BT pairing
Blue light flashing slowly: Pending for playing at BT mode
Red light on ： Charging
Green light on ： Fully charged
Blue light flashing : Data transfer mode
Green light flashing : Pending to play at MP3 mode
Blue light breathing: BT game low latency mode
LED Indicator

Storage & maintenance
*Store the BT headphone in a cool and a dry place ,the
working temperature is 0-45°C
*Please charges it before using after a long time
storages.
*Do not put the headset at a higher or lower
temperature environment.
*Do not charge the headset in the moist environment.
*Do not use the headset during charging.
Note:
Wearing and removing the headset with your both hands.
Please adjust its position according to your comfort.

Troubleshooting
Can't switch to MP3 mode
Cannot switch to MP3 mode if the internal memory card
has no songs.
No sound in MP3 mode
Please make sure to increase the volume in MP3 mode.
Not charging or unable to transfer data
Please wipe the charging port clean and try again.
For bathing and swimming
It is recommended that use the headphones no deeper
than 1.5 meters under water.And do not use it underwater
longer than 30 minutes in a single use.

Model: REERAY R6
Horn unit: Bone conduction transducer
Impedance: 2dB
BT version: 5.3
Microphone sensitivity :-42dB
Support :HSP/HFP/A2DP/AVRCP
Decoding : MP3/APE/FLAC
Connect distance : 10m/33ft
Battery capacity : 180mAh
Built-in memory :16G
Playback time : Up to 10 hours @70% volume
Standby time : About 240 hours
Charging time : About 2 hours
Waterproof : IP68
Charging voltage : 5V
Input : DC 5V/100mA
Warranty:
We offer 100% satisfaction guarantee. If you have any
questions or concerns about our product,please feel free to
email us at [email protected].
Manufacturer: ReeRay Technology Ltd
Address: RM 705,7/F FA YUEN BLDG,77 FA YUEN ST,KLN,HK
Email: [email protected]