REIZEN 151922 User manual

Instruction Manual for
EXTRA WIDE TALKING BATHROOM SCALE WITH MEMORY
(Item# 151922)
In order to get the utmost accuracy and lifespan of our product, please read the following
instruction before using it.
zFunction and Characteristics
·Voice function.（English)
·Memory for 2 users. (NO 1 or 2)
·Personal data memory: 30 records for each user.
Auto on – scale turns on automatically when you step on it to weigh yourself
zDefinitions of the keys
MODE: - Turns the scale ON
-Displaysuser’slatestweight(see Viewing of the historical measurement record)
- “TIME” record goes back to “00” when viewing recorded weights.
▲- Select user’s number (NO.1 or 2)
- Checks the user’s memory records. By pressing once, the historical measurement record on
the screen will go forward once. (From 01 to 30) (see Viewing of the historical
measurement record) NOTE: 01 is the latest weight, 30 is the oldest weight
▼⁄U – Changes measuring unit: kg-lb. You can only operate this key when you turn on the scale and
the screen displays “0.0”.
-By pressing once the historical measurement record on the screen will go backward once (see
Viewing of the historical measurement record)
Notes:
1. When the display is flashing, no function can be operated.
2. Make sure to place the scale on flat ground.
3. Stepping onto the scale allows it to turn on automatically.
zWeighing without memory function
Place the scale on flat ground and step onto the scale. Your weight will be displayed and then read out
loud twice. The scale will turn off automatically after reading the weight out loud.
zWeighing with memory function
Turn on the scale and it will display “0.0”. Press the ▲key and the user number will begin to flash. Press
the ▲key to select user (1 or 2). Wait 4 seconds, when scale shows “0.0” step onto the platform and

your weight will be displayed and read out loud twice. This weighing data will be saved as the user’s
latest weight. Each user can save up to 30 recordings.
zViewing of the historical measurement record
Turn on the scale and it will display “0.0”, and then press the ▲key to select user (1 or 2). When the
scale shows “0.0”, press the MODE key which will display the user’s latest weight. The memory time will
flash; press the ▲key to view recorded weights from the 1st to your 30th recording. When you are
viewing the recorded weights, the scale will not read them out loud.
zDeleting Memory Record
Turn on the scale and it will display “0.0”, then press the ▲key to select user (1 or 2). When the scale
displays “0.0” press the “MODE” key displaying the users latest weight, then press both “MODE” and
“▼/U” for a few seconds. Then all records on that user will be deleted. If you want to delete the other
user’s records, re–start the scale and repeat the procedure above.
zBattery installation
Slide off the battery cover on the back of the scale and connect one 9V battery (not included) onto the
proper terminal heads. Slide the battery cover back onto the unit.
zTrouble shooting
1. “Lo” : weak battery, replace with a new battery (not included)
2. “OL” : scale overload.
3. “Err”: scale incorrect operation.
zTechnical Specification
Max. capacity：250kg /550 lbs
Min. capacity: 2kg /4.4 lbs
Division : 0.1kg /0.22 lbs
Weight mode : kg ,lb
Memory user : 2 users
Operation condition:T:0-40C RH＜85﹪
Power : 1×9V battery (not included)
● Notes
1. Place scale on a flat ground.
2. Keep your scale in a dry place to protect the electronics. Avoid extremely high or low temperature
environment.
3. The scale is a high precision electronic product; please avoid excessive impact or vibration to the
unit.
4. To prevent scratches on the glass panel, don’t wear footwear.
5. Clean with a cloth, don’t use solvents or immerse the scale in water.
6. The product is designed for household use and should not be used for commercial purposes.
Please listen to your doctor’s advice.