Important Notes:
1. This watch is resistant to rain and splashing, but should
not be submerged in water.
2. Do not expose watch to extreme heat or
freezing temperatures.
3. Do not expose watch to strong static or electromagnetic
fields (magnets, etc.)
4. The watch can withstand normal shaking, but is not
shock resistant. Dropping or unusually rough handling
may cause damage.
5. Do not expose to gasoline, oil, detergents, glue, paint,
etc., as damage to the sealing ring, watch case and
surface could result.
6. Use only a soft cloth and clear water for cleaning.
7. Some watch models have silk-screened patterns
imprinted on the watchband. Be careful not to rub too
vigorously or the pattern may be worn off.
8. Do not wear the watch too tightly around your wrist.
It is recommended that the watch be loose enough that
you can insert a finger under the band.
9. Keep the watch stored in a dry environment when not
in use
10. The coating of the watch may fade and scuff under
heavy pressure, long term use, abrasion or friction.
11. The resin watchband may show a white shading in use.
This powder is not harmful and can be easily wiped
away. To extend the life of the watchband, wipe off
any dirt or moisture on the band as soon as possible.
12. DO NOT OPEN THE WATCHCASE. The precision
electronic parts should be serviced only by an
authorized repairperson. If water or smoke gets
inside the watch, it should be serviced immediately to
avoid corrosion or other damage.
13. Please keep your owner’s manual in a safe place for
future reference.
Manual for Digital Analog Talking
Water-Resistant Watch
Choose alarm sound and turn alarm on/off:
In time display mode, press B3 [HOUR] button to toggle
through alarm sound choices. (Current alarm time will be
displayed.) When you reach the desired alarm sound,
wait for the watch to return to time display mode. An
alarm icon will be displayed on the LCD. To turn the
alarm off, toggle through alarm sounds until no sound is
heard and the alarm icon disappears from the LCD.
Standard Display and Button Functions:
Note: Different models have different designs, but all have
the same functions and settings.
OPERATION:
Adjust analog time:
Gently pull out the crown, then adjust the exact analog
time by turning the crown clockwise. Push the crown in
after finishing the adjustment (see diagram above).
To set Digital time
Press B1 to change the function as follows:
TO set time
Starting from time display mode, press B1 [MODE] to enter
time setting mode. Press B2 [MIN], B3 [HOUR] to adjust
minutes and hours respectively to the correct time.
TO set Alarm time
Starting from time display mode, press B1 [MODE] twice
to enter alarm setting mode. AL symbol will display with
blinking numerals. Press B2 [MIN], B3 [HOUR] to adjust
minutes and hours respectively to the appropriate time.
