RELACART HCR-30D Guide

HCR-30D
True diversity camera
wireless receiver system
Installation and Operation

P1 P2
Thank you for choosing a RELACART professional wireless microphone system. You have
joined thousands of other satisfied customers. Our years of professional experience of
design and manufacturing to ensure our products’ quality, performance and reliability.
Contents
01 Safety Operation and Notice .....................................................................................................
02 System Performance Feature ...................................................................................................
03 Packing List ............................................................................................................................
04 Receiver Function Introduction .................................................................................................
05 Receiver Display Overview .......................................................................................................
06 Transmitter Function Introduction .............................................................................................
Handheld microphone (UH-2) ...............................................................................................
Bodypack microphone (UT-2) ...............................................................................................
07 Install Camera Slot and Rear Panel Adapter ................................................................................
Install the camera slot adapter ..............................................................................................
SONY adapter ..............................................................................................................
Panasonic adapter ........................................................................................................
Install the rear panel adapter ................................................................................................
08 Receiver and camera mounted and positioned.............................................................................
09 Receiver Operation Menu .........................................................................................................
10 Technical Specification ............................................................................................................
P3
P4
P6
P7
P9
P10
P10
P12
P14
P14
P14
P14
P15
P16
P17
P19

P3 P4
Safety Operation and Notice
01
1. Please read instructions for safety operation carefully before installation and operation. Please save your safety
operation guide for future reference.
2. Do not scratch, bend, twist, stretch or heat the power cord as this may cause damage to the power cord, resulting
in a fire or electric shock.
3. Do not open the device shell, otherwise it may cause electric shock. If you need to repair, maintain or repair,
please contact your local agent.
4. Do not touch the power plug with wet hands as this may cause a fire or electric shock.
5. Do not attempt to modify this device. Failure to do so may result in personal injury or product malfunction.
6. Do not use this equipment near water.
7. If the power cord is damaged (such as a broken wire or bare core), obtain replacement parts from your dealer.
Continued use of the equipment with a damaged power cord may result in fire or electric shock.
8. To move the device he power, unplug the power cord, and unplug all connecting cables as this may damage the
cable, resulting in a fire or electric shock.
9. Before cleaning the device, unplug the power cord and unplug all connecting cables. Please clean it with a dry
soft cloth.
10. If the device is not in use for a long time, turn off the power, it is best to unplug the socket.
11. With the power plug and appliance coupler as the disconnecting device, it should be kept easy to operate.
12. For the safe use of the equipment and adequate ventilation, the minimum clearance around the equipment should
be maintained at a distance of 5 cm or more.
13. DO NOT cover the Ventilation holes, such as: newspaper / fabric / curtains and other items.
14. Equipment should not be placed on a bare flame source, such as: lit candles.
15. Battery should not be exposed to sunshine, roasted or other high temperature overheating environment.
16. Do not throw the waste battery, please put in the designated bins.
17. Water protection rating: IPX0
18. The device can be used normally in tropical / temperate climates.
19. This product is only suitable for safe use at the altitude of 2000m and below.
20. This symbol “ ” indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
21. All Relacart products will be afforded one year free maintenance except for man-made damage, such as:
— the device is damaged by man-made factors.
— the device is damaged by improper operation.
— some components are damaged or loss after the self-disassembly.
HCR-30D is an ultra-small wireless microphone system designed for professional camera
positioning. At the same time, the intelligent channel diversity receiver can be divided into
single channel true diversity and dual channels antenna diversity switching. It is mainly used in
professional Video camera, with wireless handheld microphone or wireless bodypack, so that
the camera is free from the interference of microphone signal line during recording, so that the
distance and positioning of video and sound are more closely combined, so as to achieve the
recording effect of original sound reproduction, and ensure the mobile operation of the camera,
more flexible, convenient and safe use.
System erformance eature P F
02
Key Features:
· Has a sturdy and water-resistant aluminum alloy housing to meet professional quality
requirements. The new technology OLED display can display the transmitter battery, radio
frequency and audio working status at the same time.
· Equipped with super quiet electronic touch switch, which can avoid the mechanical sound
amplification of the switch.
· Equipped with “Panasonic” and “SONY” two kinds of easy to disassemble and replace the
fixed bracket output module, easy to install in different video cameras.
· Separate SMA soft antenna and antenna connector with adjustable Angle of 1/4 wavelength
are adopted.
· Super wide frequency selection UHF 521.25MHz~ 936.85MHz, true diversity reception.

P5 P6
(Transmitter optional product)
(SONY adapter) (Panasonic adapter)
(Receiver)
· It has the function of [AFS] to automatically search for the cleanest and non-interference
frequency in the actual environment, enter the setup menu and select AFS function, the
receiver will auto-scan and lock the working interference-free frequency.
· With [IR] infrared automatic frequency matching function, press the [SYNC] button, the
transmitter can automatically and accurately lock the working frequency of the receiver.
· Stable PLL phase-locked oscillation circuit, with “noise detection”mute control function,
can effectively block noise RF interference in the working environment.
· The unique DSP audio expansion algorithm of Relacart is adopted to minimize the noise
caused by the wireless transmission process and restore the best sound. The audio
output of the receiver can be set to multiple mode output (two mixing, mixing 1, mixing 2,
audio separation)
· The design of hand-held microphone is simple, flexible and light, showing the soft grip
feeling of humanization.
· Precision low-consumption circuit design, so that the battery life is twice as long as the
ordinary microphone.
· The hardware circuit of the whole system is controlled by a microcomputer. Advanced
computer technology is used to calculate the frequency without interference with each
other, which makes the performance of the whole system more stable and less prone to
frequency deviation and frequency break.
Packing List
03
Receiver *1
Wireless *2transmitter (optional product: handheld or bodypack)
Fixed adapter * 1 (optional products: Panasonic, SONY)
1.5V AA battery *4
Installation and operation * 1

P7 P8
A B
1
5
6
3
4
2
1
7B
7A
Receiver Function Introduction
04
SMA antennas A and B.
Infrared data transmission [IR] window: used to send infrared signals to the transmitter to
achieve synchronization.
OLED display: For setting up and monitoring the receiver. The main window shown above
is used during normal operation to display antenna signal and audio levels, frequency
group channels, transmitter battery status, and diversity activity for both receivers.
“ ” menu/Select button: This button is used to enter the setting interface and select the
menu items during the setting process.
“ ” Power/Return button: Long press this button to turn on power or turn off power. While
navigating various menus and Settings screens, a short press also serves as a “back”
button to return to a previous screen or menu item.
“ / ” button: it is used to select various options and adjust values in the setting
interface. And provides accessibility features such as locking panels to prevent
accidental changes.
The rear panel adapter: panasonic and SONY two different panel adapter can be
used to configure the receiver, convenient and popular cameras slot. The adapters are
secured through two screws on the side panels of the case, making them easy to install.
1
3
4
5
2
6
7

P9 P10
1234678
9
The appearance of the OLED main window will change depending on the selected diversity mode:
Dual channel mode: Set the receive separation mode to dual channel mode, two audio channels
will be displayed.
Single-channel true Diversity mode: Setting the receive separation mode to single-channel true
diversity mode will display a single audio channel.
The main window displays information about antenna phase, audio level, frequency group
channel, frequency, volume level, EQ, and battery status for the receiver and associated
transmitter.
Press the “ ” menu/select button to access the menu and interface to set the receiver and search
for clear channels.
Note: When single-channel true diversity mode is selected, two receivers are combined to receive
the same transmitter, so the main window displays a single audio channel.
Dual channel mode Single channel true diversity mode
Transmitter
name
A, B
antenna signal EQ Transmitter battery
volume level
Channel Frequency
Audio level
Transmitter name
Receiver 1Transmitter battery
Channel
5
Receiver Display Overview
05
Receiver 2
Audio level
Transmitter Function Introduction
06
Handheld microphone (UH-2)
6

P11 P12
6
7
1
9
8
1
21
35
4
The microphone cartridge: used to pick up the audio to the transmitter modulation.
OLED display: display the frequency, group, channel and battery life, etc. Battery indicator
displays a maximum of 4 bar segments. When it leaves 1 bar segment, the batteries should
be replaced immediately.
Toggle power switch: turn the power on or off.
Infrared data receiving window (IR): Synchronization of transmitters via IR interface from
receiver.
“SELECT” button: press the button to edit the menu parameter values.
Menu setting button: press to enter or confirm the setting.
Battery cover: Unscrew it can reveal the battery compartment; When installing, replacing or
setting the infrared frequency, the battery cover must be opened.
Handheld transmitter tail cover: integrated antenna transmission output port.
Battery compartment: Insert 2 fresh 1.5V AA batteries. (Alkaline type is recommended.
Please remember to replace both batteries.)
Warn: Observe correct polarity as marked inside the battery compartment to avoid damage
to the internal electric parts.
1
3
4
5
2
6
7
8
9
Bodypack transmitter (UT-2)

P13 P14
4-pin mini XLR plug: Connect to 4-pin lavalier microphone or instrument cable.
Light touch power switch: turn the power on or off.
“ ” button: Press the button to enter the selection or confirmation menu.
“ ” button: Press the button to edit the menu parameter values.
Infrared data receiving window (IR): Synchronization of transmitters via IR interface from
receiver.
OLED display: display the frequency, group, channel and battery life, etc. Battery indicator
displays a maximum of 4 bar segments. When it leaves 1 bar segment, the batteries should
be replaced immediately.
Belt clip: fix the transmitter around the user's waist.
Battery cover: pull to open the battery door.
Battery compartment: Insert 2 fresh 1.5V AA batteries. (Alkaline type is recommended.
Please remember to replace both batteries.)
Warn: Observe correct polarity as marked inside the battery compartment to avoid damage
to the internal electric parts.
1
3
4
5
2
6
7
9
10
8
Install the camera slot adapter
SONY adapter
Pass four long countersunk stock hex screws through the screw holes on
the adapter and slide them onto the receiver housing.
Pass the four cross screws through the lug on the receiver adapter plate
as shown, then line them up with the small screw holes on the adapter.
Panasonic adapter
Two different types of screws are used to connect the receiver adapter to the adapter.
The short countersunk stock hex screw is threaded through the adapter and screwed into the
camera body.
Attach the adapter to the receiver adapter plate by sliding
it up and tightening the fixing screw.
The four lower screws are fixed to the camera body.
Install Camera Slot and AdapterRear Panel
07

P15 P16
Various accessories are available to enable various installation options. For maximum
operating range, the antenna should be placed vertically above the camera and other equipment.
The SMA soft antenna is connected so the whip can be vertically oriented.
Do not install the receiver here, so that the antenna is close to other equipment or horizontal
position.
A cross screw holds the receiver to the adapter.
Countersunk hex screws secure the adapter to the camera body.
Note: If you are having trouble inserting the receiver into the
camera slot, try attaching the black adapter to the camera first
before inserting the receiver.
Install the rear panel adapter
The installation of the rear panel output adapter is the same for all models.
The panels are held in place by
two cross screws on either side
of the housing.
The connection between the panel and the main
circuit board is made through miniature companion
connectors.
Align the matching connectors
and slide the panel directly into
the housing until the screw hole
is aligned with the housing.
Receiver and camera mounted and positioned
08
The receiver is installed so
that the antenna extends into
clear air and is vertically
oriented to provide a circular,
horizontal coverage pattern.

P17 P18
Receiver Operation Menu
09
SYNC
CH1 CH2
SYNC?
Yes No
LEVEL
Frequency List
Frequency List
Squelch
Squelch
SYNC
SYNC
AFS
LEVEL
CH1 CH2
LEVEL
CH1 CH2
LEVEL
0dB
Press / to adjust,
Adjustable range: 0dB to -42dB, every step 3dB
Frequency List
CH1 CH2
Frequency List
Gr:01 Ch:01
Frequency List
CH1 CH2
Press / to select, Optionally preset fixed
frequency within channel groups 1-10
Frequency List
Gr:01 Ch:01
Squelch
CH1 CH2
Squelch
CH1 CH2
Squelch
05dB
Press / to adjust,
Adjustable range: 05dB to 35dB, every step 5dB
SYNC
CH1 CH2
SYNC?
Yes No
SYNC
>>>>>> Press / to select
Two languages are optional
English
Language
Chinese
Language
Language
EXIT
EXIT
LEVEL
RESET
Yes No
AFS
EQ Channel
Group
AFS
CH1 CH2
AFS?AFS?
Yes No
AFS
CH1 CH2
AFS?
AFS?AFS?
Yes No
RESET
Yes No
RESET
PILOT
ON OFF
PILOT
ON OFF
MIXMODE
PILOT
PILOT
RESET
RESET
Language
DIVMODE
MIXMODE
EQ
CH1 CH2
EQ
CH1 CH2
EQ Press / to , select
Four intelligent sound quality management options
EQ
DIVMODE
Press / to : select, Receiver separation mode
dual channel , diversity (SWITCH) (RATIO)
Press / to select,
Pilot setting
Press / to Select “Yes” to restore the select,
device system to the factory Settings
Press / to , select
Four mixing modes are optional
SWITCH
DIVMODE
MIXBOTH MIXTO 1 MIXTO 2 DIRECT
MIXMODE MIXMODE MIXMODE MIXMODE
RATIO
DIVMODE
RATIO modeSWITCH mode
Note: When single-channel true diversity mode is selected, the main window displays a single
audio channel without channel selection when entering the menu Settings.