Blades
■It is recommended to oil the blades after every use.
■Place 1 to 2 drops of lubricating oil on the moving blade and turn on the
trimmer. The oil should distribute on its own. Wipe off any excess oils.
Troubleshooting
Clipper cutters do not move:
■The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintaining section.
■Always clean the blade and trimmer before storing.
■Always place the blade protection guard back on the clipper blades
before storing.
U.S. residents: To order accessories, contact us at 800-392-6544, visit us at
RemingtonProducts.com, or visit your local retailer.
Canadian residents: To order accessories, please call 800-268-0425 or visit us
at RemingtonProducts.com.
Cleaning & Maintaining Your Clipper
After each use:
■Remove the accumulated hair from the cutters. Do not submerge the trimmer
in water.
Cleaning Cautions:
■Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on the
cutter casing.
■Unplug the trimmer from the power outlet when not in use and when cleaning.
Storage
■Always store this appliance and cord in a moisture-free area.
■Do not wrap the cord around the appliance.
■Do not store in temperatures above 140ºF.
Cleaning & Maintenance
Remington Guarantees Satisfaction After 30 Days!
Remington Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call
800-736-4648 in the US or 800-268-0425 in Canada.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded Men’s Shave and Groom
product:
a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
*Applies to US and Canadian customers’ returns only.
Questions or comments: Call 800-736-4648 in the US or 800-268-0425 in
Canada or visit RemingtonProducts.com.
Lifetime Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for the life of the product. This warranty does not
include damage to the product resulting from accident or misuse.
If the product should become defective, we will replace it free of charge. Return
your product with your name, address and day time phone number to: Remington
Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more informa-
tion call 800-736-4648 in the US or
800-268-0425 in Canada.
Warranty excludes:
■The blades are not included in lifetime warranty
This warranty does not cover products damaged by the following:
■Accident, misuse, abuse or alteration of the product
■Servicing by unauthorized persons
■Use with unauthorized accessories
■Connecting it to incorrect current and voltage
■Wrapping cord around appliance causing premature wear & breakage
■Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO THE LIFE OF THE PRODUCT.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington branded product, you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within
30 days from the date of purchase. If you have any questions concerning the
money-back guarantee, please call 800-736-4648 in the US or 800-268-0425
in Canada.
Warranty
Comb Guide Number: Length:
01/16" (1.5mm)
11/8" (3mm)
21/4" (6mm)
33/8" (9mm)
41/2" (12mm)
55/8" (16mm)
63/4" (18mm)
77/8" (22mm)
81" (25mm)
120 VAC 60 Hz
T22-0002799
Line Cord Safety Tips
NOTE: This appliance has a polarized plug (one blade is wider than the other). As
a safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
1. To insert plug, grasp it firmly and guide it into outlet.
2. To disconnect the appliance, grasp the plug and remove it from outlet. Do not pull
or yank on the cord or appliance. Do not wrap the cord around the appliance.
3. The clipper comes with a 8 foot cord. Care should be taken when storing the
product in its case to not bend or crimp in a way to put stress on it.
Attaching Guide Comb Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada Inc., 131 Saramia Crescent,Vaughan,ON L4K 4P7
® Registered Trademark of Spectrum Brands, Inc. (SBI)
© 2014 SBI 9/14 Job# 10951-00
Made in China
Hair Length Settings
1. Guide combs should be installed by first hooking the blade teeth to front side of
guide comb. Then press the back of the guide comb down until it snaps
into place.
2. Ensure comb is attached before beginning to cut hair.
3. To remove, pull the snap tab on back side of guide comb and pull the comb off.
