Renaissance Learning NEO 2 User manual

© 2010 Renaissance Learning, Inc. All rights reserved.
PO Box 8036, Wisconsin Rapids, WI 54495
Phone: [phone]| Fax: [phone] Page 1 of 2 R39761.100325
QuickStart Guide – Renaissance™ Wireless Server Setup
NEO 2 has many features that rely on a Radio Frequency network. Some of these features include
quizzing with Accelerated Reader™, opening and saving files in Google Docs and NEO Share™,
responding using the 2Know!™ Toolbar or AccelTest™, and printing wirelessly. Complete the
following tasks to set up your Renaissance wireless network.
Install Software and Hardware
1. Install NEO Manager™ from www.renlearn.com/neo/downloads. This will automatically
install the Renaissance Wireless Server Utility software.
2. Connect the Renaissance Receiver™ to the computer using the USB cable included.
Configure the Renaissance Wireless Server Utility
1. Launch the Renaissance Wireless Server Utility
from the Start menu (Windows) or the
Applications folder (Mac).
2. When prompted for an Administrator PIN, enter
1234 and press OK.
3. If you are not prompted for an Administrator
PIN, the server may not be running. To power
on the server, click the Start button, and then enter
the PIN.
To the computer
USB port
To the Renaissance
Receiver
The Renaissance Receiver
must be connected to a
computer to perform any
wireless tasks.

© 2010 Renaissance Learning, Inc. All rights reserved.
PO Box 8036, Wisconsin Rapids, WI 54495
Phone: [phone]| Fax: [phone] Page 2 of 2 R39761.100325
4. From the Server Settings tab, enter a Network Name.
5. Once named, click Update Settings to save the changes.
6. If you use Accelerated Reader or MathFacts in a Flash™ on the Renaissance Place™
platform, click Renaissance Place Settings.
7. Enter your Renaissance Place address and click Verify.
8. When
verified,
click
OK.
.