displayit E20A User manual

20’ Ensemble Tension Fabric Trade Show Display Kit E20A
Assembly Instructions
79” x 91” Flat-Top 79” x 91” Flat-Top
79” x 101” Arch-Top
1. Straighten and assemble all
bungeed poles.
2. Assemble the frame by aligning
the stickers as seen in the frame
diagram above.
4. Attach the feet to the frame as
seen in the diagram above.
3. Pull pillowcase graphic over frame
and zip bottom closed.
Foot push button holes
face forward
Foot push button holes
face backward
Foot push button holes
face backward
1
23
4
5
6
7
8
9101112
13
14
15
16
12
34
5
6
7
8
9101112
13
14
15
16
12
34
5
6
7
8
9101112
13
14
15
16

2. Using the provided 5mm allen wrench
assemble the monitor and shelf supports.
1. Matching the numbered stickers,
assemble the frame as seen in Diagram A.
3. Screw bracket to horizontal support bar
using the provided 4mm allen wrench.
Ensure hook is facing downward on right.
4. Mount the monitor bracket to back of
monitor as shown above using a Phillips
head screwdriver.
5. Slide the monitor into the bracket until
it locks in place.
Optional Monitor Mount
Attaches Here
Diagram A
VESA 100 monitors
on outer holes
VESA 75 monitors
on inner holes
22
Ensemble Shelving System with Monitor Mount
Assembly Instructions
Top of Monitor
Monitor weight must not
exceed 15 pounds.
lbs