Southern Enterprises JS5533 User manual

Assembly Instructions
Page 1
WALL MOUNT
JEWELRY ARMOIRE
For assistance with assembly contact
us by phone or email.

Tool List: 3/16" drill bit, drill, tape measure and pencil.
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly, separate
each type of screw. Carefully study the screw diagrams below.
A
Quantity
of 1
1
Quantity
of 3
Plastic Anchor
2
Quantity
of 3
Scre
3
Quantity
of 1
Knob
4
Quantity
of 1
Blot
5
Quantity
of 1
Levels
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with
rough or abrasive objects.
Assembly Tool Required
No.2 Phillips Scre driver
(Not Included)
Page 2
WALL MOUNT JEWELRY ARMOIRE
Parts List
Wall Mou t Jewelry Armoire
For replacement parts or questions, please
call our Customer Service. Do not return
product to store. Please call manufacturer
for assistance, questions or parts.

Figure 1
Step 1
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page.
Step 2
Find a desired location. Mark 3
locations for screws on wall.
Step3
Drill two 3/1 " holes. The distance
between the three holes must be the
same as figure 1 shows. One screw
must be attached directly into a wall
stud. Wall anchor is not needed
when mounting to wall stud
Insert plastic anchors (1) into the 2
holes on wall as shown. (When doing
this, you will need a hammer help
you).
Figure 2
Assembly Instructions
11.22"
26"
Page 3
WALL MOUNT JEWELRY ARMOIRE
Step 4
Open the
Wall Mount Jewelry Armoire (A).

Figure 3
Step 5
Attach the Knob (3) to door with Bolt
(4). Tighten Bolt (4) by using Phillips
head screwdriver (not included).
Figure 4
Page 4
Step
Connect the Wall Mount Jewelry
Armoire (A) and plastic anchor (1)
with screw (2). Tighten screw (2) by
using Phillips head screwdriver (not
included). and last check if Jewelry
Armoire (A) is attached on the wall
firmly.
Step 7
place levels on top to insure product
is level
Now your new Wall Mount Jewelry
Armoire is ready to use.

Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity
Needed
Parts Replaceme t Form
Page 5
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact us by phone or email if you have product issues. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.