Renkus-Heinz ICL-R Manual
Digitally Steerable Line Array Loudspeaker Systems
IC Live
ICL-R
Digitally Steerable Line Array
IC215S-R
Dual 15 Inch Subwoofer
OPERATORS GUIDE
ICL-R Preset Listing
Single Array
14 - See Note ________________________________________________________________________
________________________________________________________________________________
15 - ________________________________________________________________________________
________________________________________________________________________________
16 - ________________________________________________________________________________
________________________________________________________________________________
17 - ________________________________________________________________________________
________________________________________________________________________________
18 - ________________________________________________________________________________
________________________________________________________________________________
19 - ________________________________________________________________________________
________________________________________________________________________________
Stacked Arrays
24 - See Note ________________________________________________________________________
________________________________________________________________________________
25 - ________________________________________________________________________________
________________________________________________________________________________
26 - ________________________________________________________________________________
________________________________________________________________________________
27 - ________________________________________________________________________________
________________________________________________________________________________
28 - ________________________________________________________________________________
________________________________________________________________________________
29 - ________________________________________________________________________________
________________________________________________________________________________
IC Live Operators Guide
RH 651 Rev E August 2011
IC Live Operators Guide IC Live Operators Guide
General Information
for a wide range of event types and sizes, are easy to transport and setup, and deliver superior sound in
a consistent 150o
-
Common Setups
ICL-R digitally steered line arrays and IC215S-R subwoofers were
designed to work together, both acoustically and mechanically
by most musical productions and a solid mounting base for the tall
joins the line array and the subwoofer together into a rigid
assembly, allowing the subwoofers to be used as mounting bases
ICL-R arrays perform best when their acoustic center, the point
of origination for the narrow acoustic beam, is several feet above
an ICL-R array mounted on top of a standing IC215S-R subwoofer
An IC215S-R subwoofer laid on its side and a single ICL-R array
two stacked arrays on a single subwoofer is not recommended, as
Computer Controlled Operation (continued)
any connected loudspeakers and list them in the
Network folder in the directory tree below the Scan
Use your mouse to drag the array listing into the
Status Bar at the bottom of the icon will be red
while the array is being synced and then turn
Selecting the Supervise tab will change the
loudspeaker icons in the work space from the
you identify it in multi-array setups and to mute its
Supervision window which allows you to see at
a glance how the array is performing and adjust
system during a program is to watch the array
being overdriven and red bars indicate a problem
icon will open its supervisory window and provide
OK
IC Live Operators Guide IC Live Operators Guide
Important:
-
-
Dual subwoofer assemblies combined with either
a single ICL-R array or with two stacked ICL-R
-
Stacked ICL-R arrays provide tighter beam
control than a single ICL-R and a much higher
reverberant rooms where tight control of the
beam is needed to deliver clear speech over a
support provided by the subwoofers is not
needed, single or stacked ICL-R arrays are an
rear pole/handle and using the pole clamps to
Operation Without Computer Control
1.
2.
by accident, you select an empty preset, the dots following
3. If you will be using an AES/EBU digital signal, make sure
4.
5.
6.
Computer Controlled Operation
-
ent or unauthorized changes of the control settings and you may be denied access to some or all of the
IC Live Operators Guide IC Live Operators Guide
Assembly
IC Live is a building block system designed for easy
1. Stand the two column arrays side by side and
2.
Note that the top module should be turned upside
down so the horn sections of the two modules are
3.
to allow its inner sleeve to drop down into the lower
4.
ICL-R Presets (continued)
Preset 21
with a 20 degree opening
directivity control and higher
sound levels in venues with
100 foot deep audience
areas than a single ICL-R
Preset 22
with a 15 degree opening
venues with 125 foot deep
Preset 23
ICL-R with a 10 degree
for venues having audience
areas more than 125 feet
IC Live Operators Guide IC Live Operators Guide
Assembly (continued)
5. Slide the two joining bars into the channels
as shown and lock the joining bars into place
6.
modules together
into the interconnect socket on the lower
module and the other end into the socket
into the looping power socket on the lower
module and the other end into the power socket
7.
-
switches should be set as shown in the graphic
before setting the dip switches, you will need to
disconnect it and then reconnect it before the dip
Do not attempt to mount a two array stack onto
-
Switch Setting Illustration
ICL-R Presets
Preset 11
ICL-R with a 30 degree
-
gested for venues with 50
Preset 12
ICL-R with a 25 degree
-
gested for venues with foot
Preset 13
ICL-R with a 20 degree
-
gested for venues with 100
IC Live Operators Guide IC Live Operators Guide
System Wiring
IC Live arrays were developed for a wide range of different size and types of venues, including even large
operational control and supervision of multiple arrays from a remotely located computer and multi-chan-
Although shown in the diagrams the computer, the Ethernet switch and its associated wiring are optional
Analog Audio /
AES/EBU Input
CAT5e Crossover Cable
Analog or AES/EBU Digital Cable
Analog Audio /
AES/EBU Input
Analog or AES/EBU Digital Cable
CAT5e Crossover Cable
Ethernet
Switch
Analog Audio /
AES/EBU Input
Analog or AES/EBU Digital Cable
CAT5e Cable CAT5 Cables
Single ICL-R Array Setup
Stacked (Dual) ICL-R Array Setup
Stacked (Dual) ICL-R Array & Dual IC215S-R Subwoofers Setup
Analog 1 - AES/EBU Input
90/260 V, 50/60 Hz
Connectors
Looping Analog 1- AES/EBU
Input connector
AES/EBU Input Selector
System Wiring (continued)
Array Control Panel
IC Live Operators Guide IC Live Operators Guide
System Wiring
IC Live arrays were developed for a wide range of different size and types of venues, including even large
operational control and supervision of multiple arrays from a remotely located computer and multi-chan-
Although shown in the diagrams the computer, the Ethernet switch and its associated wiring are optional
Analog Audio /
AES/EBU Input
CAT5e Crossover Cable
Analog or AES/EBU Digital Cable
Analog Audio /
AES/EBU Input
Analog or AES/EBU Digital Cable
CAT5e Crossover Cable
Ethernet
Switch
Analog Audio /
AES/EBU Input
Analog or AES/EBU Digital Cable
CAT5e Cable CAT5 Cables
Single ICL-R Array Setup
Stacked (Dual) ICL-R Array Setup
Stacked (Dual) ICL-R Array & Dual IC215S-R Subwoofers Setup
Analog 1 - AES/EBU Input
90/260 V, 50/60 Hz
Connectors
Looping Analog 1- AES/EBU
Input connector
AES/EBU Input Selector
System Wiring (continued)
Array Control Panel
IC Live Operators Guide IC Live Operators Guide
Assembly (continued)
5. Slide the two joining bars into the channels
as shown and lock the joining bars into place
6.
modules together
into the interconnect socket on the lower
module and the other end into the socket
into the looping power socket on the lower
module and the other end into the power socket
7.
-
switches should be set as shown in the graphic
before setting the dip switches, you will need to
disconnect it and then reconnect it before the dip
Do not attempt to mount a two array stack onto
-
Switch Setting Illustration
ICL-R Presets
Preset 11
ICL-R with a 30 degree
-
gested for venues with 50
Preset 12
ICL-R with a 25 degree
-
gested for venues with foot
Preset 13
ICL-R with a 20 degree
-
gested for venues with 100
IC Live Operators Guide IC Live Operators Guide
Assembly
IC Live is a building block system designed for easy
1. Stand the two column arrays side by side and
2.
Note that the top module should be turned upside
down so the horn sections of the two modules are
3.
to allow its inner sleeve to drop down into the lower
4.
ICL-R Presets (continued)
Preset 21
with a 20 degree opening
directivity control and higher
sound levels in venues with
100 foot deep audience
areas than a single ICL-R
Preset 22
with a 15 degree opening
venues with 125 foot deep
Preset 23
ICL-R with a 10 degree
for venues having audience
areas more than 125 feet
IC Live Operators Guide IC Live Operators Guide
Important:
-
-
Dual subwoofer assemblies combined with either
a single ICL-R array or with two stacked ICL-R
-
Stacked ICL-R arrays provide tighter beam
control than a single ICL-R and a much higher
reverberant rooms where tight control of the
beam is needed to deliver clear speech over a
support provided by the subwoofers is not
needed, single or stacked ICL-R arrays are an
rear pole/handle and using the pole clamps to
Operation Without Computer Control
1.
2.
by accident, you select an empty preset, the dots following
3. If you will be using an AES/EBU digital signal, make sure
4.
5.
6.
Computer Controlled Operation
-
ent or unauthorized changes of the control settings and you may be denied access to some or all of the
IC Live Operators Guide IC Live Operators Guide
General Information
for a wide range of event types and sizes, are easy to transport and setup, and deliver superior sound in
a consistent 150o
-
Common Setups
ICL-R digitally steered line arrays and IC215S-R subwoofers were
designed to work together, both acoustically and mechanically
by most musical productions and a solid mounting base for the tall
joins the line array and the subwoofer together into a rigid
assembly, allowing the subwoofers to be used as mounting bases
ICL-R arrays perform best when their acoustic center, the point
of origination for the narrow acoustic beam, is several feet above
an ICL-R array mounted on top of a standing IC215S-R subwoofer
An IC215S-R subwoofer laid on its side and a single ICL-R array
two stacked arrays on a single subwoofer is not recommended, as
Computer Controlled Operation (continued)
any connected loudspeakers and list them in the
Network folder in the directory tree below the Scan
Use your mouse to drag the array listing into the
Status Bar at the bottom of the icon will be red
while the array is being synced and then turn
Selecting the Supervise tab will change the
loudspeaker icons in the work space from the
you identify it in multi-array setups and to mute its
Supervision window which allows you to see at
a glance how the array is performing and adjust
system during a program is to watch the array
being overdriven and red bars indicate a problem
icon will open its supervisory window and provide
OK
Digitally Steerable Line Array Loudspeaker Systems
IC Live
ICL-R
Digitally Steerable Array
IC215S-R
Dual 15 Inch Subwoofer
OPERATORS GUIDE
ICL-R Preset Listing
Single Array
14 - See Note ________________________________________________________________________
________________________________________________________________________________
15 - ________________________________________________________________________________
________________________________________________________________________________
16 - ________________________________________________________________________________
________________________________________________________________________________
17 - ________________________________________________________________________________
________________________________________________________________________________
18 - ________________________________________________________________________________
________________________________________________________________________________
19 - ________________________________________________________________________________
________________________________________________________________________________
Stacked Arrays
24 - See Note ________________________________________________________________________
________________________________________________________________________________
25 - ________________________________________________________________________________
________________________________________________________________________________
26 - ________________________________________________________________________________
________________________________________________________________________________
27 - ________________________________________________________________________________
________________________________________________________________________________
28 - ________________________________________________________________________________
________________________________________________________________________________
29 - ________________________________________________________________________________
________________________________________________________________________________
IC Live Operators Guide
RH 651 Rev E August 2011
Other manuals for ICL-R
2
This manual suits for next models
2
Table of contents
Other Renkus-Heinz Subwoofer manuals
