ResinTEAK FURNITURE FLDG-RSN User manual

1/4
ITEM NAME: Resin Teak Adirondack New Tradition Folding chair
MODEL: FLDG-RSN
For assistance with assembly, please contact customer service
1-949-316-0010 or Email: [email protected]

2/4
PRE-ASSEMBLY PREPARATION:
THIS PACKAGE MAY CONTAIN SMALL ITEMS WHICH SHOULD BE KEPT AWAY FROM CHILDREN
▪Please check that all parts and hardware are included before beginning assembly.
▪Save all packing materials until assembly is completed to avoid accidentally discarding small parts
▪Read through the preparation and assembly instructions in full before beginning assembly.
▪Please use CAUTION AND CARE WHEN LIFTING the product to avoid personal injury and (or)
damage to the product.
▪For ease of assembly, 2 adults are recommended; Assembly time: Approximately 30 minutes.
PART LIST:
A. Seat-1pc
B. Back Panel -1pc
C. Front legs -2Pcs
D. Left Armrest (Bottom View)
E. Right Armrest (Bottom View)
HARDWARE LIST:
F.Bolts 2’’-2Pc
G.Bolts 2.4"-2Pcs
H . Bolts 2.55 "-2Pcs
J. Screw 2.4” – 2PCs
K. Washer –6Pcs
L. Lock nut- 6Pcs
M.Allen wrench 1Pc
N.Wrench 1Pc

3/4
STRUCTURE DIAGRAM:
STEP-BY-STEP ASSEMBLY:
STEP 1:
Put together the Front Legs(Part C) to the Seat
(Part A). Use Bolt G with Washer and Nuts
Important: Do not over tighten the bolts
Step 2:
Put the armrest together with the Front legs by
using Bolt H with Washing and Nuts
Important: Do not over tighten the bolts

4/4
STEP 3:
1) Attach the Back(B) to the end of the
arm rest used Screw J.
2) Then attach one end of folding bracket
to the back leg of the seat using Bolt F
with Washer and Nut
Important: Do not over tighten the bolts
Step 4:
Slightly tighten all the bolts, but do not over tighten.
Furniture care
For assistance with anything, please contact customer service
1-949-316-0010 or Email: [email protected]
Style designed and created in California, USA