Restoration Hardware 19th C. English Artist's Easel User manual

Customer Service - If you are missing parts or have any questions about this product please contact
us at 1-800-762-1751
Thank you for choosing this quality product. Be sure to check all packaging materials carefully for small
parts that may have loosened inside the carton during shipment,and place on a non-abrasive surface.
IMPORTANT
This TV easel can be cumbersome and heavy, therefore the assistance of two or more people is
recommended in order to prevent personal injury and ensure the easel is not damaged during the
assembly process.
C A U T I O N
The top shelf of this easel is intended for use with:
Plasma/LCD/DLP/HD televisions having a maximum
screen size of 50 inches and weight of 135 lbs.
All other support shelves should not be loaded with more
than 25 lbs.
DO NOT EXCEED RECOMMENDED LOAD. Use with
products heavier than the maximum sizes and weights
indicated may result in instability causing possible
injury.
Do not allow children under 16 years to move easel.
DO NOT REMOVE THIS LABEL
MISE EN GARDE
L'étagère supérieure de ce support ou chariot est
destinée à recevoir:
Une télévision à écran plasma ou haute densité dont
l'écran ne mesure pas plus de 127.0 cm et qui ne pèse
pas plus de 61.4 kg.
Les autres étagères ne doivent pas recevoir une charge
de plus de 11 kg.
NE PAS DÉPASSER LA CHARGE RECOMMANDÉE.
L'utilisation avec des articles qui dépassent la taille et le
poids recommandés peut rendre l'article instable et
entraîner des blessures.
Il faut interdire à tout enfant de moins de 16 ans de
déplacer le chariot.
NE PAS ENLEVER CETTE ÉTIQUETTE
!
!
19th C. English Artist's Easel

LOOSEN/ TIGHTEN
I N S T R U C T I O N S
1. Roll the easel away from the wall so you can
easily fit behind it and work freely with no
interference.
2. Twist the adjustment knob counterclockwise
on the upper bracket of the easel to loosen. The
upper bracket can be adjusted to correspond to your
TV's height. Please see figure 01 (A, B).
3. Gently place the TV onto the easel,and check
the lower bracket to ensure that the TV is set properly if the TV is set properly and
and secure. Slide the upper bracket to fit atop
the TV snugly so that it holds it firmly in place. Please
see figure 02 (C).
4. Firmly adjust the thumb screw at the back so that it
graspsthe vertical threaded rod as in figure 03 (D).
5. To adjust the display of your TV, engage the
crank into the key located at front surface of the
lower bracket. Turn the crank clockwise to rise
up and counterclockwise to lower it. Please see
figure 04 (F).
6. Note: After making the adjustment, secure the
barrel bolt at the back to fasten as in figure 03 E.
7. Roll the easel to the area where you want to
display your TV, and position it near an electrical
outlet. Be sure to place in an area where it will not
be easily jostled or knocked over.
FIGURE 01
FIGURE 02
FIGURE 03
FIGURE 04
A
B
C
D
F
E
W A R N I N G
BE SURE TO UNFASTEN THE BARREL BOLTS ON
THE REAR OF THE EASEL PRIOR TO ADJUSTING
THE HEIGHT.
!
DOWN
UP
DOWN
Thank you for your purchase
www.rh.com