Rev-A-Shelf 5PSP User manual

I-5PSP-900-0518
5PSP SOFT-CLOSE BLIND CORNER ORGANIZER
TOOLS REQUIRED:
45 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
1
4
1
8
1
16
3
8
3
32
7
64
#2 #1 5
16
5
8
1
2
3
8
2” 1” 90˚
1
4
1
8
1
16
3
8
3
32
7
64
#2 #1 5
16
5
8
1
2
3
8
2” 1” 90˚
1
4
1
8
1
16
3
8
3
32
7
64
#2 #1 5
16
5
8
1
2
3
8
2” 1” 90˚
1
4
1
8
1
16
3
8
3
32
7
64
#2 #1 5
16
5
8
1
2
3
8
2” 1” 90˚
#2
#2 #2
#2 #2
#2
1
16
INSTALLATION OPTIONS
5PSPSC-15 (15” Opening) page 2
left handed door
5PSPSC-15 (15” Opening) page 5
right handed door
FITTING PARTS LIST:
PANEL PARTS LIST:
Description QTY
1Handles 2
2M4x10 mm at-headed screws 2
3M6x10 mm wafer head screw 8
4M5x6 mm at head screws 8
54G x18 mm pan head screws 19
6M4 x 4.5 mm pan head screws 2
Description QTY
ABase 1
BFrame 1
CFeet 1 Set
DGuide Channel 1
EBaskets 4
C.
A. B.
D.
E.
12
34
56
INSTALLATION INSTRUCTIONS: 5PSP SOFT-CLOSE BLIND CORNER ORGANIZER

2
Mount Base (Fig. B).
STEP 1
Door Drawer Blind RightDoor Drawer Blind Right
Full Height Blind RightFull Height Blind Right
Blind Portion
of Cabinet
Door Opening
Door Opening
Door Opening
Door Opening
Shown with adjacent cabinet
Shown with adjacent cabinet
Blind Portion
of Cabinet
Door Drawer Blind LeftDoor Drawer Blind Left
Full Height Blind LeftFull Height Blind Left
Blind Portion
of Cabinet
Door Opening
Door Opening
Door Opening
Door Opening
Shown with adjacent cabinet
Shown with adjacent cabinet
Blind Portion
of Cabinet
Blind Portion
of Cabinet
Door Opening
5PSP-15 (LEFT HANDED DOOR OPENING)
Use (19) of the 4G x 18 mm
pan head wood screws to
secure the base to the bottom
of the cabinet (See Fig C-1).
Note: Pre-drilling the screws
is recommended.
Install the guide channel on the
base of the unit by securing
it with (2) of the M5 x 6 mm
at head screws. If the guide
channel is installed incorrectly,
the unit will not open correctly.
(See Fig C-2).
STEP 2
Fig. A
Fig. C-1 Fig. C-2
#2
CHOOSING THE DESIRED BOTTOM
SHELF FOR THE UNIT
Unscrew the M4 x 4.5 mm Pan
Head Screws from the bottom
of the shelf. Choose the
desired color by ipping the
shelf. Install the bottom shelf
back by screwing the M4 x 4.5
mm Pan Head Screws back
into the unit (See Figure A).
BLIND
Fig. B
From door opening
Guide Channel
305 mm
160 mm 256 mm
To front of cabinet
5
4

3
Install the handles onto the
frame using (2) of the M4 x
10 mm Flat head screws (See
Figure D).
STEP 3
Attach the two feet to the
frame using (8) of the M6 x 10
mm wafer head screws. Each
foot will use (4) screws. (See
Fig E).
STEP 4
Fig. D
Fig. E
2
3

4
Secure the assembled frame to
the base inside of the cabinet
by using (6) of the M5 x 6 mm
at head screws. Make sure
to follow the placement on
Figure F.
STEP 5
Attach the (4) baskets onto the
unit (See Figure G).
STEP 6
Fig. F
Fig. G
4

5
Mount Base (Fig. B).
Note: If installing into a face
frame cabinet, base must be
ush with the opening.
STEP 1
Use (19) of the 4G x 18 mm
pan head wood screws to
secure the base to the bottom
of the cabinet (See Fig C-1).
Note: Pre-drilling the screws
is recommended.
Install the guide channel on the
base of the unit by securing
it with (2) of the M5 x 6 mm
at head screws. If the guide
channel is installed incorrectly,
the unit will not open correctly.
(See Fig C-2).
STEP 2
Fig. A
Fig. C-1 Fig. C-2
CHOOSING THE DESIRED BOTTOM
SHELF FOR THE UNIT
Unscrew the M4 x 4.5 mm Pan
Head Screws from the bottom
of the shelf. Choose the
desired color by ipping the
shelf. Install the bottom shelf
back by screwing the M4 x 4.5
mm Pan Head Screws back
into the unit (See Figure A).
BLIND
Fig. B
From door opening
Guide Channel
305 mm
160 mm 256 mm
To front of cabinet
5PSP-15 (RIGHT HANDED DOOR OPENING)
Door Drawer Blind RightDoor Drawer Blind Right
Full Height Blind RightFull Height Blind Right
Blind Portion
of Cabinet
Door Opening
Door Opening
Door Opening
Door Opening
Shown with adjacent cabinet
Shown with adjacent cabinet
Blind Portion
of Cabinet
Door Drawer Blind LeftDoor Drawer Blind Left
Full Height Blind LeftFull Height Blind Left
Blind Portion
of Cabinet
Door Opening
Door Opening
Door Opening
Door Opening
Shown with adjacent cabinet
Shown with adjacent cabinet
Blind Portion
of Cabinet
Door Opening
Blind Portion
of Cabinet
5
4

6
Install the handles onto the
frame using (2) of the M4 x
10 mm Flat head screws (See
Figure D).
STEP 3
Attach the two feet to the
frame using (8) of the M6 x 10
mm wafer head screws. Each
foot will use (4) screws. (See
Fig E).
STEP 4
Fig. D
Fig. E
2
3

7
Secure the assembled frame to
the base inside of the cabinet
by using (6) of the M5 x 6 mm
at head screws. Make sure
to follow the placement on
Figure F.
STEP 5
Attach the (4) baskets onto the
unit (See Figure G).
STEP 6
Fig. F
Fig. G
4

8