Rexair AquaMate User manual

2
customer care number
As part of Rexair’s Customer Care program, each AquaMate receives a Customer Care serial number only after passing
Quality Control assurance testing.This serial number provides:
For future reference, record the serial number in the space provided below. No authentic, new AquaMate should be
sold without this number. If the serial number is missing, Rexair makes no claim as to the origin, age, or condition
of the unit. If you are unable to locate a serial number on your AquaMate, please contact Rexair’s customer service
department.
9Assurance of passing Quality Control testing
9Assurance of“factory-fresh”condition
9Ownership identication for you
9Warranty identication for your Distributor
Rainbow®, RainbowMate®, RainMate®, AquaMate®, Rexair®, The Power of Water®, Wet Dust Can’t Fly®and the conguration of the Rainbow®Cleaning System are registered
trademarks of Rexair LLC, Troy, Michigan, United States.
LLC
50W. Big Beaver Road, Suite 350 | Troy, Michigan 48084 | USA
[phone] | custser[email protected]
rainbowsystem.com
YOUR AUTHORIZED RAINBOW DISTRIBUTOR
AQUAMATE SERIAL NUMBER
NAME
ADDRESS
CITY/STATE/POSTAL
PHONE
E-MAIL
Contact your
local authorized
Rainbow
Distributor
for advice on
caring for your
AquaMate,
warranty
coverage,
replacement
parts and service
information.

3
!WARNING:TO REDUCE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY
1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
2. To reduce the risk of electrical shock, use indoors only.
3. To avoid risk of electrical shock and to reduce risk of re, use only Rainbow cleaning products intended for use
with this machine.
4. To avoid risk of electrical shock, use only the hose supplied with the Rainbow for wet pickup operations. See
Rainbow owner’s manual. Do not modify the electried plug in any way.
5. The AquaMate contains an electric motor and power cord.To avoid risk of electrical shock, DO NOT immerse the
electric cord in water while lling or cleaning the tank.
!IMPORTANT
6. The AquaMate tank is designed to use only clean, cold tap water. To avoid damage to the AquaMate, do not place
any of the following into the water tank:
• Hot water or liquids.
• Detergents of any kind, including Rainbow products.
• Commercially available cleaning liquids or compounds.
7. Use only AquaMate Concentrate Solution or Clean Floor Concentrate Solution in the small side soap tank.
8. Do not use on hardwood, laminate or marble ooring.
9. Ensure the carpet has thoroughly dried before using the Rainbow Power Nozzle to vacuum.
10. Do not use the AquaMate when the clean water tank is empty. This could result in damage to the pump.
11. For further safety instructions, refer to Rainbow Owner’s Manual.
SERVICING OF DOUBLE-INSULATED APPLIANCE
In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a
double-insulated appliance requires extreme care and knowledge of the system and should be done only by qualied
Rainbow service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they
replace. A double-insulated appliance is marked with the words“DOUBLE-INSULATION”or“DOUBLE-INSULATED.” The
Symbol (square within a square) may also be marked on the appliance. Any servicing other than cleaning should be
performed by an Authorized Rainbow Distributor or Service Center.
important safety instructions
SAVE THESE
INSTRUCTIONS
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY
USE THE AQUAMATE ONLY AS DIRECTED IN THIS OWNER’S MANUAL
USE THE AQUAMATE WITH MODEL E2 RAINBOW ONLY
!PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS UNIT
When using an electrical appliance, basic precautions should always be
followed, including the following:

4
get acquainted with your aquamate®
1
2
3
4
5
6
!CAUTION: Do not use the AquaMate on hardwood oors, laminates, marble, Persian and Oriental rugs or
other surfaces that may be susceptible to water damage or can be easily scratched.
STORAGE & MAINTENANCE
• The clear plastic lens located on the front of the AquaMate can be easily removed for cleaning between uses.
• The brush roll can be pulled down to allow cleaning between uses.
• To clean water from wands, remove front lens and run Rainbow for 20 seconds.
• A little soap goes a long way! Use no more than one capful of soap in the soap tank, and always ll the
remainder of the soap reservoir with clean water.
• Do not store the AquaMate with water or soap in the tank.
• Prior to storing the AquaMate, empty the tank and suck any residual water from the receptacles.
• Always turn the valve“o”and remove the water tank. This eliminates a potential for leakage.
• If the AquaMate is unattended for a short period of time, move the valve to the“o”position.
1. AquaMate
2. AquaMateTank
3. Stainless SteelWands*
4. Rainbow Hose*
5. Rainbow*
6. Rainbow Dolly & Water Basin*
7. AquaMate Carpet Cleaner
* Not included
Soap + Water
Water Only
Extract
7

5
quick-start guide
1. Prepare the carpet…
a. Use the Rainbow and Power Nozzle to vacuum the entire area to be cleaned, making sure there is no
remaining debris on the surface.
b. Empty and rinse the water basin. Do not rell.
2. Prepare the AquaMate…
a. Begin with an empty water basin. Attach the Rainbow and dolly. Attach the hose and wands.
b. Insert the bottom wand with male end into the opening located on top of the AquaMate. Press downward
until button lock clicks.
c. Add one capful of Rainbow AquaMate Concentrate Solution to the AquaMate soap reservoir.
d. Fill the remainder of the AquaMate soap reservoir with cool, clean tap water and secure the cap tightly.
e. Fill the AquaMate water reservoir with cool, clean tap water and secure the cap tightly.
f. Place the AquaMate tank onto the AquaMate until you feel it lock into place.
3. Shampoo…
a. Set the AquaMate switch to the SOAP + WATER position.Turn on the Rainbow to HIGH mode.
b. Squeeze the pistol trigger grip and apply solution to the carpet using slow forward and
backward movements across the oor. Use the handle’s trigger lock switch to keep the brush
roll fully engaged.
4. Rinse…
a. Set the AquaMate switch to theWATER ONLY position.
b. Squeeze the pistol trigger grip and rinse the carpet using slow forward and backward
movements across the oor. Use the handle’s trigger lock switch to keep the brush roll fully
engaged.
5. Extract…
a. Set the AquaMate switch to the EXTRACT position.
b. Extract the remaining water from the carpet using very slow backward movements.
c. For extra dry carpet, go over the entire area a second time.
d. When nished cleaning, empty and rinse the water basin. Allow to dry.
PRIMING THE AQUAMATE
The AquaMate may require priming, which may take approximately 20 seconds. To reduce priming time, several things
can be done:
1. Make sure the water tank is fully seated
2. Turn the valve to the SOAP + WATER position
3. Squeeze and release the handle trigger several times
If the soap reservoir becomes empty while you are operating the AquaMate, and the valve is in the SOAP +WATER
position, no water will be dispensed because air is being sucked through the soap reservoir. When operating the
AquaMate without soap, always ll the soap reservoir with water to prevent loss of prime.

6
x1
3 FT
1 M
3 FT
1 M
x1
3 FT
1 M
3 FT
1 M
x1
3 FT
1 M
3 FT
1 M
x1
3 FT
1 M
3 FT
1 M
x1
3 FT
1 M
3 FT
1 M
x1
3 FT
1 M
3 FT
1 M
x1
3 FT
1 M
3 FT
1 M
1
3
5
7
2
4
6
8

7
9
11
13
15
10
12
14
16

rainbowsystem.com
Rexair LLC | Troy, Michigan
© 2011 Rexair LLC | R14388A-0 | Printed in U.S.A.