Rexing HS01 User manual
User Manual
HS01
Smart Security Camera
The information in this manual is subject to change without notice.
Rexing All Rights Reserved
www.rexingusa.com
We hope you love your new products as much as we do. If you need assistance,
or have any suggestions to improve it, please contact us.
Our support team will respond you as soon as possible.
Always a surprise in Rexing.
•https://www.facebook.com/rexingusa/
•https://www.instagram.com/rexingdashcam/
•https://www.rexingusa.com/support/registration/
Overview
Thank you for choosing REXING!
Check us out here.
Facebook Instagram Site Product Support
(877) 740-8004
1
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
Features
2
Red
Indicator Light
Flashing Red
Wi-Fi Connecting
Blue
Indicator Light
Blue Light
Live View
Flasing Blue
Motion Detection
Microphone
Wide-angle Lens
Motion Sensor
Indicator Light
Light Sensor
USB Port
Reset Button
Speaker
What’s in the box?
1. Rexing HS01 Security Camera
2. Rechargeable 6000mAh Battery
Pack (included in the unit)
3. Camera Mount
4. Solar Panel
5. Anchor Packs
6. Screw Packs
7. User Manual
8. Safety Guide
5
2
3
1
6 8
User Manual
HS01
Security Camera
Theinformation in this manual is subject to change without notice.
RexingAll Rights Reserved
www.rexingusa.com
7
34
Safety Guide
www.rexingusa.com
安全ガイド
Set up Your Camera
4
1. Remove the battery cover
Push your thumbs up to slide the battery cover off, and then remove it from the
bottom of the camera
Before You Start
You may download the app by searching "Rexing Home" in the Apple or Google
Play store.
1. Open the App and log in to your account
2. To add your camera, select the + icon.
3. Select Rexing HS01 camera.
3. Attach the battery cover.
Push and slide the battery cover back until it locks into place.
5
2. Insert the battery
Insert the fully charged battery into the bottom of your camera until it clicks into
place. Please remember to peal the adhesive protector off the battery before
inserting it into the unit.
5. Give it a try!
After setup, tap the Live View in the app to see live video from your Rexing HS01
Security Camera.
4. Set up your device in the App
6
1. Press and hold the Reset Button on the back of the camera until the red light is
flashing.
2. Enter your 2.4GHz Wi-Fi network and the Wi-Fi pasword, then tap Next (5GHz
is not supported).
3. Use your camera to scan the QR Code shown on the App, then select Confirm
once the Wi-Fi setup has finished.
�" Distance
7
Install Your Security Camera
1. Attach the mount to the camera
2. Secure tightly with the stand screw
3. Choose a location
Place the Rexing HS01 Security Camera anywhere, inside or outside your home.
It can be mounted on a wall, ceiling, or placed on a tabletop. Put it in an area
where you wish to view.
8
Once you have chosen a wall or a ceiling for your camera, mark drill holes and
use a bit drill to drill holes in your wall or ceiling. Insert anchors and secure your
camera with mounting screws.
Mounted on a ceiling Mounted on a wall
How to Install the Solar Panel
Please complete the camera setup in the App prior to installing the solar panel
(included). Install the Solar Panel if you wish to have a completely self sustaining
device which doesn't require you to replace batteries.
1. Choose a installation location
Pick an unshaded spot for best sun exposure. The solar panel should be
installed where it will receive several hours of direct sun light daily.
2. Mark your spot
Place the solar panel mounting arm at where you plan to install, and mark
the screw hole positions lightly with a pencil.
9
3. Drill the holes
Optional: You may opt to use a drill bit to drill the holes where you have
previously marked.
•For mounting surfaces that are brick, concrete, or stucco, please use the
plastic anchors. You may need to use a hammer to install the anchors.
•For mounting surfaces that are wood or vinyl, you can omit the anchors, and
use the screws directly.
4. Install the mounting arm
Use a screwdriver to secure the mounting arm to the wall, tighten securely.
10
Note:
You may adjust the angle of the solar panel for better sun coverage. Simply
loosen the adjustment screw on the mounting arm, adjust to desired angle,
and retighten the screw.
5. Attach the solar panel
Attach the solar panel onto the mounting arm, ensure that it is installed correctly.
11
6. Plug the cable
Lastly, plug the solar panel charging cable into the camera. Let’s start charging!
Power the Rexing Smart Security Camera by plugging the Micro USB of the
solar panel into the USB port of the camera.
Charging and Powering the camera
12
If you experience some issues during the app setup, try these steps:
Check your Wi-Fi password.
The most common issue during setup is incorrect Wi-Fi passwords. Passwords
are case sensitive. Please double-check your password.
Reboot the router/modem.
If you have entered the correct password, but still experiencing issues, try
unplugging the power to your router/modem. Wait for 30 seconds, then plug the
power back and turn it back on. Proceed to setup again in the app.
Troubleshooting and FAQ
Share via Email:
The new user has to download the app and create an account with the same
email address which the device owner has shared with. Log in to the account and
you'll see the shared device.
How long do my videos stay in my account?
Your videos can be stored in the Cloud for up to 7 days for FREE and other
paid plans are available to purchase (up to 365 days).
How to reset network settings?
Press and hold the Reset Button until red light is flashing. Follow the in-app
instructions to finish your Wi-Fi setup.
How to share the device with my family?
Open the app. From the home page, tap the Share icon. Tap Share via Email
or Share via QR Code. You can share the device with up to 8 users.
13
How many users can view the video at the same time?
Up to 3 users may view the video feed, but only 1 user can use the direct
intercom. Both iOS and Android are compatible.
Why is my Wi-Fi signal poor on my device?
Your device may be too far away from your wireless router or you may have
some obstructions in between that reduce signal strength. You might try
repositioning your router to get a signal.
How to adjust Motion Detection Sensitivity?
Tap the Motion Detection Icon:
•Fast: Records and notifies you about every motion. Shortest battery life.
•Medium: Records and notifies you about motion less often. Standard battery life.
•Slow: Records and notifies you about motion even less often. Maximum battery life.
Share via QR Code:
1. Open the App on a new user's smartphone.
2. From the home page, tap +.
3. Tap QR Code Sharing, then scan the QR code the device owner generated before.
4. You will see Share successful, then tap Confirm.
Is 5GHz Wi-Fi supported?
No. Only 2.4GHz Wi-Fi is supported.
How to enable Notifications on my phone?
To do this, you need to give permission for the app to access to your microphone
and enable notifications. Follow these steps to enable notifications.
1. Open Settings. Go to the app permissions and select Notifications.
2. Make sure all switches are on.
Warranty & Support
The Rexing HS01 Security Camera comes with a full 12-month warranty. If you
register your product on our official site
(https://www.rexingusa.com/support/registration), you can extend the warranty
to 18 months.
Warranty
If you have any questions regarding your product, please do not hesitate to contact
answered within 12-24 hours.
Support
Rexing is firmly committed to always improving our products, services, and user
experience. If you have any thoughts on how we can do even better, we welcome
your constructive feedback and suggestions.
Your opinion matters
Thank you for choosing Rexing!
14
FCC ID: 2AW5W-HS01
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Other manuals for HS01
1
Table of contents
Other Rexing Security Camera manuals
