Rextron VSA12 User manual

User's Manual
Please read this manual throughly and
follow the INSTALLATION procedures to
prevent any damage to the Video Splitter
or any connecting devices.

Introduction …………………………….
Introduction …………………………….Introduction …………………………….
Introduction …………………………….
The Video Splitters,VSA12 ,VSA14 and VSA18 broadcast
and boost one VGA signal source for 2, 4 or 8 VGA
monitors respectively. There is no software or interface
card to install. Just connect the cables, power up the
system and you are ready to have duplicated VGA images
for multiple monitors with excellent quality. Superb high
bandwidth circuit enables high-resolution VGA signal of
350Mhzto be displayed onmultiple monitors.
Application: …………………………….
Application: …………………………….Application: …………………………….
Application: …………………………….
!"
presentations
!"
exhibits
!"
demonstration
!"
trade shows
!"
monitor testing and burn-in
!"
business meetings
Features…………………………………
Features…………………………………Features…………………………………
Features…………………………………
!"
Duplicate one VGA input to multiple VGA outputs.
!"
Effective transmission distance: 65M (210ft)*
!"
Automatic power-save when VGA input is lost.
!"
Applicable to VGA, SVGA and multi-sync monitors.
!"
Cascaded operationforincreased VGA outputs.
!"
Crisp clear VGA images
*WithUL-2919 rated VGA cables.

Connection …………………………….
Connection …………………………….Connection …………………………….
Connection …………………………….
One piece of HDB15 male-to-female cable is required to
connect from the Video Splitter Input to a computer's VGA
output. Multiple monitors should be connected to the
Video Splitter's output ports as shownbelow.
Figure 1 : VSA12 Connection
Figure 2 : VSA14 Connection
Figure 3 : VSA18 Connection

Operation ………………………………
Operation ………………………………Operation ………………………………
Operation ………………………………
►ACTIVE LED turns on when there is VGA signal at the
Input port.
►POWER LED turns on when the Video Splitter is
powered up bythe AC 9V power adapter.
Specification …………………………...
Specification …………………………...Specification …………………………...
Specification …………………………...
Function VSA12 VSA14 VSA18
Number ofVGA
output 2 4 8
Signal bandwidth 350Mhz 300Mhz
Signal type VGA, SVGA, Multi-sync
LED POWER (green) x 1
ACTIVE (amber) x 1
Cable length 65M (210ft) Max.
HDB15 male x 1Connector - Input
-Output HDB15
female x 2 HDB15 female x 4 HDB15 female x 8
Power consumption AC 9V, 200mA, normal operation
10mA, power-save mode
Enclosure Metal
Weight 400g 428g 720g
Dimension (mm) 20 x 85 x 180 40x196 x70

Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR'S
LIABILITY FOR DIRECT OR INDIRECT, SPECIAL,
INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS
OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL
LOSS WHICH MAY BE CAUSED BY THE USE OF THE
PRODUCT EXCEEDS THE PRICE PAID FOR THE
PDOCUDT.,
The direct vendor makes no warrantyor representation, expressed
or implied with respect to the contents or use of this
documentation, and especially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the
product or documentation without obligation to notify any user of
such revisions or updates. For further information,please contact
your direct vendor.
All the brand names and registered trademarks are the property of
their respective owners.

Copyright 01/2002 Rextron Technology, Inc.
PP5-V7200-300
Printed in Taiwan