RGBlink TAO 1pro User manual

Unpack Connect
Sources Connect LAN Connect PS
Check Sources
PVW
Set a
Source to
PGM/Live
Open YouTube
Studio Select Create Live Select Stream Connect a USB to laptop Open a TXT Editor
Copy Stream URL
Save TXT file to
USB as rtmp.ini
Paste URL into
TXT file
Copy Stream Key Paste Key after
URL
Unplug USB from
laptop
Connect USB to
TAO 1pro
Press Stream Press + to
Create
Event
Enter a
Description
and Create
Select the
Event then
Edit
Touch ‘+’’to Add
Platform
Touch the
YouTube
icon Press Add Press ‘X’ to
close the
popup
Turn on YouTube
toggle Press Next Press Confirm
Press ON AIR
POWER ON
YouTube acquires
stream
Signal
Good /
Excellent
Stream
Starts
Stream Starts
TAO 1pro
TAO 1pro
laptop
laptop
Stream to
YouTube

Unpack, Connect, Power Up & Preview
IMPORTANT: When using HDMI connect before Power On.
Hot-plugged HDMI sources may not be detected
Preview Sources
Test your sources by previewing each input source
on screen.
More Information
•Default view shows the
selected signal full screen
•Touch the screen to reveal
the UI controls
•Touch the source HDMI or UVC label at
top left to see all sources and their status.
•Touch a source with a green button to
PVW that source. Button will flash yellow.
•Touch again, button will become red,
switching this source be the PGM live
output. If there is an HDMI monitor
connected, this source will display on the
monitor.
Source Status: Ready In PVW Live PGMNo Source

Set up a Platform Profile
Get a USB stick and a laptop to get your information from YouTube to then create a file to load TAO 1pro as
your streaming platform profile.
Open YouTube
Select Go Live
More Information
Open Notepad or your favourite TXT editor
Copy Stream URL
Copy Stream Key
Paste Stream URL
Paste Stream Key
Type ‘/’
Save file to USB stick as rtmp.ini

Set up an Event and Add Platform Profile
Connect USB stick with rtmp.ini file from the previous step to the RECORD USB port on TAO 1pro In this step
you will create an event and add the platform profile to the event and be ready to go ON AIR. An Event allows a
group of Platform settings to be saved and recalled.
•Touch the Stream Event
button
More Information
•Add an Event Setting •Touch and type in a
name for your Event.
•Press Enter to confirm
•Press Create
Create an Event

Set up an Event and Add Platform Profile
Connect USB stick with rtmp.ini file from the previous step to the RECORD USB port on TAO 1pro In this step
you will create an event and add the platform profile to the event and be ready to go ON AIR. An Event allows a
group of Platform settings to be saved and recalled.
•Select the event icon
•Press Edit
More Information
•Touch +to add a
streaming platform to
the event
•Touch the YouTube icon to
select
•Press Add to confirm
•Press ‘x’ to close pop-up
Add Platform Profile

Set up an Event and Add Platform Profile
Connect USB stick with rtmp.ini file from the previous step to the RECORD USB port on TAO 1pro In this step
you will create an event and add the platform profile to the event and be ready to go ON AIR. An Event allows a
group of Platform settings to be saved and recalled.
•Turn on the platform
using the toggle control
•Press Next
More Information
•Press Confirm •Press ON AIR to start
streaming
Prepare to Start Streaming