RH Baby&child LANDRY TODDLER BED CONVERSION KIT INST User manual

LANDRY TODDLER BED CONVERSION KIT INSTRUCTIONS
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include
the product model number, color, and a brief description of the part. Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth.
Blot spills immediately and wipe with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original
hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
NOTE: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 12- 34of a turn. After crib is completely assembled, return to each bolt and
tighten. Use wax or soap on all bolts to facilitate assembly
WARNING: Read all
instructions before assembling this
product. KEEP INSTRUCTIONS
FOR FUTURE USE.
All Restoration Hardware cribs are designed to meet the highest safety
standards and comply with all U.S. and Canadian cribs and cradles regulations.
Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
2900 North Macarthur Dr. Tracy,
CA95376, USA
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
Page 1
OPTION A
OPTION B

Page 2
IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS
·The mattress intended for use on the bed shall be a full-size crib
mattress having minimum dimensions of 51-5/8 inches (1310mm) in
length, 27-1/4 inches (690mm) in width and 4 inches (100 mm) in
thickness, not exceeding 6 inches (152 mm) in thickness.
·If guardrails are used as the mattress containment means,
guardrail(s) provided must be used to avoid the formation of a gap
between the mattress and the bed that could cause an entrapment.
·DO NOT place bed near windows where cords from blinds or drapes
may strangle a child.
·DO NOT place items with a string, cord, or ribbon around a child’s
neck, such as hood strings or pacifier cords.
·DO NOT suspend strings over a toddler bed for any pacifier cords.
·A child using the toddler or day bed shall be at least 15 months of age
and shall not weigh more than 50lbs (22.7kgs).
WARNING: ENTRAPMENT / STRANGULATION HAZARD
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could
result in serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes
may strangle a child.

Page 3
WARNING: ADULT ASSEMBLY ONLY, OWING TO THE PRESENCE OF
SMALL PARTS, SHARP POINTS AND EDGES.
CAUTION
TODDLER BED: THE MINIMUM AGE SHALL NOT BE LESS THAN 15 MONTHS AND THE MAXIMUM
WEIGHT SHALL NOT BE GREATER THAN 50LBS. (22.7 KG).
THE MATTRESS INTENDED FOR USE ON THE BED SHALL BE A FULL-SIZE CRIB MATTRESS HAVING
MINIMUM DIMENSIONS OF 51-5/8 IN. (1310MM) IN LENGTH, 27-1/4 IN(690MM)IN WIDTH AND 4 IN. (100MM)
IN THICKNESS NOT EXCEEDING 6 IN. (152MM) IN THICKNESS.
CARE INSTRUCTIONS:
·Dust often using a clean, soft, dry, lint- free cloth.
·Blot spills immediately, and wipe with a clean, damp cloth.
·We do not recommend the use of chemical cleaners, abrasives, or furniture polish on our lacquered finish.
TODDLER CONVERSION KIT
ASSEMBLY HARDWARE IS
INCLUDED IN THE TODDLER
KIT BOX.
ALLEN WRENCH = 1 PC
(EE)1/4" x 1/2" BOLT = 2 PCS
HARDWARE
HEADBOARD
TODDLER RAIL
STORAGE
MATTRESS
SUPPORT
SIDE RAIL PANEL
(LEFT)
SIDE RAIL PANEL
(RIGHT)

Page 4
ASSEMBLY INSTRUCTIONS
STEP #1. FRONT RAIL PANEL DISASSEMBLY
Loose all the bolts in both ends of the front side rail to disassemble
the front side rail, as in DETAIL A.
STEP #2. TODDLER RAIL ASSEMBLY
Replace the front side rail by the toddler rail. See DETAIL B.
After assembly re-tighten all bolts to snug fit. DO NOT OVER
TIGHTEN.
DETAIL A
DETAIL B

Page 5
STEP #3
HIDE UNUSED HOLES
Some unused holes which can be visible can hurt your child's
finger. Please use Allen bolts (EE) provided to hide these holes.
See illustration in DETAIL C.
HARDWARE STEP #3
Allen Wrench = 1 pc
(EE) 1/4" x 1/2" BOLT = 2 pcs
(EE)
DETAIL C