Rhino-Rack Slumber Chair with Foot Rest User manual

Rhino-Rack Slumber Chair with Foot Rest (34001)
Rhino-Rack
3 Pike Street, Rydalmere,
NSW 2116, Australia. Issue No: R500
(Ph) [phone] Prepared By: Kayle Everett Issue No: 02
(Fax) [phone] Authorised By: Chris Murty Date: 26/02/2015
These instructions remain the property of Rhino-Rack Australia Pty Ltd and may not be used or changed for any other purpose than intended.
Maximum load capacity : 136kg/300lbs
CONTROLLED

1
MAX weight:
136kg/300lbs
1.
2. 558mm
940mm
Rhino-Rack Slumber Chair with Foot Rest (34001)
Item Component Name Qty Part No.
1Slumber Chair 1
2Camping Chair Bag 1
3Fitting Instruction 1R500
Parts List

23
Hold two opposing legs on the front and back of
the chair.
Push the opposing legs away from one another as
shown.
Storage pouches can be
found on the right side of the
chair.
4Attach the foot rest clips to the chair. 5
Adjust the foot rest level as
required.
Rhino-Rack Slumber Chair with Foot Rest (34001) Rhino-Rack Slumber Chair with Foot Rest (34001)

6Move the front legs of the chair. Locate the screw in foot rest attachments.
Screw in attachment
7
1.
2.
Unscrew the foot rest attachment and remove from
both front legs of the chair.
8Detach the foot rest clips and remove the foot rest.
Rhino-Rack Slumber Chair with Foot Rest (34001)
Removing the Foot Rest