
User manual
9- Once brewing is complete, the coee maker can be turned o by pressing the button,
or it can be left on and the coee will be kept hot on the heating plate. The appliance will shut
o automatically 3 hours after the brew has begun if the unit is not manually turned o.
For a better coee taste, serve just after brewing.
10- Always turn the coee maker o and disconnect the power supply when not in use.
NOTE
:::Pay close attention when serving coee. Once the brewing is complete, the coee’s
temperature will be very hot. Avoid hand contact to prevent burning.
:::The volume of coee brewed will be less than the water initially added, as some water is
absorbed by the coee grounds.
:::The brewing process can be interrupted by pressing the button at any time; the indicator
light will turn o indicating the coee maker is no longer brewing. The appliance will continue
brewing once the button is pressed again.
:::The carafe can be removed to pour and serve at any time during the brewing process.
The appliance will pause dripping automatically for a maximum of 30 seconds.
STRONG BREW FUNCTION
To adjust the coee strength, press the STRONG button once. The red coee bean shaped
indicator will light up and the appliance will brew stronger coee.
BREW START DELAY FUNCTION
This coee machine can delay brewing by up to 24 hours. To delay brewing, follow steps 1 to 6
of the USING THE COFFEE MAKER section. Follow the below steps to activate the brew start
delay function:
1- To set the clock’s current time, press the HOUR and MINUTE buttons.
NOTE: The time cycle is 12 hours with AM and PM indicators.
2- Press the PROGRAM button and the white indicator light and the time 12:00 will flash. Set the
desired brew time by pressing the HOUR and MINUTE buttons.
3- Press the PROGRAM button and the white indicator light will stop flashing and stay on. The
LCD screen will then display the current clock time. NOTE: The delay start function can be
cancelled by pressing the PROGRAM button and the indicator light will turn o. To change the
programmed start time, repeat steps 1-3.
4- When the programmed brew time is reached, the red indicator will light up, the PROGRAM
light will turn o, and the appliance will begin brewing. NOTE: During the brewing process, the
PROGRAM, HOUR and MINUTE buttons are inoperative.
5- Once brewing is complete, the coee maker can be turned o by pressing the button, or
it can be left on and the coee will be kept hot on the heating plate. The appliance will shut
o automatically 3 hours after the brew has begun if the unit is not manually turned o. For a
better coee taste, serve just after brewing.
6