Rimage Amigo II Instruction Manual

Release Notes
Service Pack 1 for Rimage Producer Software
Suite Versions 6.5 - 7.5
Rimage Producer Software Suite 6.5 – 7.5 Service Pack 1 includes a critical update.
Rimage recommends that you install this service pack at your earliest convenience.
This document describes the changes made in Rimage Producer Software Suite versions 6.5 -
7.5, Service Pack 1.
Compatibility
Service Pack 1 is compatible only with:
•Producer Software Suite version 6.5 (Minimum requirement)
•Producer Software Suite version 7.1
•Producer Software Suite version 7.2
•Producer Software Suite version 7.3
•Producer Software Suite version 7.4
•Producer Software Suite version 7.5
Changes to Rimage Software Suite Components
Support and Functionality Provided
All versions:
•Added support for the AD-5170A drive.
Production Server
Version 6.5
•Resolved issue with not being able to set DVD-R speed back to maximum once it was
manually reduced. (Rimage reference #5610)
Version 7.1
•Resolved issue with allowing DVD recording speed to exceed 16x when the recording speed
parameter is set to 16x. (Rimage reference #6652)
Version 7.2
•Resolved an issue where, if performing job streaming and the network connection is lost, the
system may not recognize that subsequent discs produced are corrupt or unreadable.
(Rimage reference #7436)
Version 7.3
•Resolved issue resulting in a PCL validation error when printer is in a “Ribbon Out”
condition.(Rimage reference #6679)
Rimage Corporation ©2008 February 4, 2008

Release Notes
Rimage Corporation ©2008 February 4, 2008
•Resolved an issue where, if performing job streaming and the network connection is lost, the
system may not recognize that subsequent discs produced are corrupt or unreadable.
(Rimage reference #7436)
Version 7.4
•Resolved issue resulting in a PCL validation error when printer is in a “Ribbon Out”
condition.(Rimage reference #6679)
•Resolved issue that caused the system to fail when processing barcodes when the last
character in the barcode is ‘$’, ‘/’, ‘%’, or ‘+’. (Rimage reference #6837)
•Resolved issue in the label selection process that caused longer print times and extra ribbon
usage. (Rimage reference #6787)
•Added command line switch ID “-ignorevolid” which forces the Production Server to ignore
the volume ID when it was specified in a production order. (Rimage reference #7121).
•Resolved an issue where, if performing job streaming and the network connection is lost, the
system may not recognize that subsequent discs produced are corrupt or unreadable.
(Rimage reference #7436)
Version 7.5
•Resolved issue that did not allow users to specify a media type for single-bin autoloaders.
(Rimage reference #7001)
•Resolved issue where the Copy CD function did not use all recorders when multiple orders
were submitted. (Rimage reference #6964)
•Added command line switch ID “-ignorevolid” which forces the Production Server to ignore
the volume ID when it was specified in a production order. (Rimage reference #7121).
•Resolved issue with slow recording times of CD-Rs with the AD-5170A recorder. (Rimage
reference #7092)
•Resolved issue where Production Server freezes when re-enabling an off-line recorder.
(Rimage reference # 7144)
•Resolved issue with extracting embedded files with Bulk Read in UDF 1.5 and higher.
(Rimage reference #6858)
•Resolved issue with a verification error that caused the message “not enough bytes read
from image file”. (Rimage reference #7195)
•Resolved issue with Production Server crashing when a user logs off a client machine when
Production Server is streaming from it. (Rimage reference #7203)
•Resolved issue with multi-line merge field conversion. (Rimage reference #6647)
•Resolved issue with support for monaural WMA files. (Rimage reference #7280)
•Resolved issue with noise when recording wave files containing information after the ‘data’
chunk. (Rimage reference # 7350)
•Resolved issue where printer hangs if the label count is great than 1. (Rimage reference
#7351)
•Resolved an issue where, if performing job streaming and the network connection is lost, the
system may not recognize that subsequent discs produced are corrupt or unreadable.
(Rimage reference #7436)