Risco VUpoint User manual

VUpoint
Bullet 4MP PoE Camera
Model: RVCM52P20
Quick Guide

2
PoE Camera Dimensions

PoE Camera Settings
Note
This camera can be connected to RISCO Cloud only via the VUpoint NVR
Step 1
Connect one end of the network cable (LAN) to the camera Ethernet port and the other side to
your router or an NVR PoE Port If the camera is not connected to PoE, power it up by an
appropriate power supply
Step 2
Use the VUpoint NVR instructions to connect the camera to the NVR using “RISCO
Pro” Camera type
Product Specification
Parameter escription
Image Sensor 1/3” 4Megapixel progressive CMOS
IR Distance 30 m
Focal Length 2 8 mm
WDR 120 dB
Firmware Upgrade Via the camera’s web interface
Power Supply 12V DC/POE
Power Consumption <5 0W
Operating Conditions -40◦C to 55◦C (-40◦F to 131◦F)/ less than ≤ 95%
Storage Temperature -40◦C to 60◦C (-40◦F to 140◦F)
Protection IP67
3