Riverstone networks Rs 1000 User manual

36-018-07 Rev. 0A

RS 1000 Switch Router

Getting Started Guide

Release 8.0

ii Riverstone Networks RS 1000 Switch Router Getting Started Guide

Riverstone Networks, Inc.

5200 Great America Parkway

Santa Clara, CA 95054

Printed in the United States of America

This product includes software developed by the University of California, Berkeley, and its contributors.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following

conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions, and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer

in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the University of California, Berkeley, and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from

this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Changes

Riverstone Networks, Inc., and its licensors reserve the right to make changes in specifications and other information contained in

this document without prior notice. The reader should in all cases consult Riverstone Networks, Inc., to determine whether any

such changes have been made.

The hardware, firmware, or software described in this manual is subject to change without notice.

Disclaimer

IN NO EVENT SHALL RIVERSTONE NETWORKS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR

CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR

RELATED TO THIS MANUAL OR THE INFORMATION CONTAINED IN IT, EVEN IF RIVERSTONE NETWORKS HAS BEEN

ADVISED, KNOWN, OR SHOULD HAVE KNOWN, OF THE POSSIBILITY OF SUCH DAMAGES.

Trademarks

Riverstone Networks, Riverstone, RS, and IA are trademarks of Riverstone Networks, Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies.

Riverstone Networks RS 1000 Switch Router Getting Started Guide iii

REGULATORY COMPLIANCE INFORMATION

This product complies with the following:

SAFETY

UL 1950; CSA C22.2, No. 950; 73/23/EEC; EN 60950; IEC 950

ELECTROMAGNETIC

FCC Part 15; CSA C108.8; 89/336/EEC; EN 55022; EN 61000-3-2

COMPATIBILITY (EMC)

EN 61000-3-3; EN 50082-1, AS/NZS 3548; VCCI V-3

REGULATORY COMPLIANCE STATEMENTS

Note Complies with Part 68, FCC rules.

FCC Registration Number 6TGUSA-46505-DE-N

Riverstone Networks, Inc.

Model WICT1-12

Made in U.S.A.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmfulinterference whenthe equipment is

operated in a commercial environment. This equipment uses, generates, and can

radiate radio frequency energy and if not installed in accordance with the

operator’s manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in

which case the user will be required to correct the interference at his own expense.

iv Riverstone Networks RS 1000 Switch Router Getting Started Guide

Warning Changes or modifications made to this device that are not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

INDUSTRY CANADA COMPLIANCE STATEMENT

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus

set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux

appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique édicté

par le ministère des Communications du Canada.

NOTICE: The Industry Canada label identifies certified equipment. This certification means that the

equipment meets telecommunications network protective, operational, and safety requirements as

prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The department

does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities

of the local telecommunications company. The equipment must also be installed using an acceptable

method of connection. The customer should be aware that compliance with the above conditions may not

prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any

repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility,

telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves, but should contact the

appropriate electric inspection authority, or electrician, as appropriate.

NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication

of the maximum number of terminals allowed to be connected to a telephone interface. The termination on

an interface may consist of any combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed 5.

Riverstone Networks RS 1000 Switch Router Getting Started Guide v

VCCI COMPLIANCE STATEMENT

This is a Class A product based on the standard of the Voluntary Control Council for Interference by

Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio

disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

SAFETY INFORMATION: CLASS 1 LASER TRANSCEIVERS

This product may use Class 1 laser transceivers. Read the following safety information before

installing or operating this product.

The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation limits. This

control loop eliminates the need for maintenance checks or adjustments. The output is factory set and does

not allow any user adjustment. Class 1 laser transceivers comply with the following safety standards:

•21 CFR 1040.10 and 1040.11, U.S. Department of Health and Human Services (FDA)

•IEC Publication 825 (International Electrotechnical Commission)

•CENELEC EN 60825 (European Committee for Electrotechnical Standardization)

When operating within their performance limitations, laser transceiver output meets the Class 1 accessible

emission limit of all three standards. Class 1 levels of laser radiation are not considered hazardous.

LASER RADIATION AND CONNECTORS

When the connector is in place, all laser radiation remains within the fiber. The maximum amount of

radiant power exiting the fiber (under normal conditions) is –12.6 dBm or 55 x 10-6 watts.

Removing the optical connector from the transceiver allows laser radiation to emit directly from the

optical port. The maximum radiance from the optical port (under worst case conditions) is 0.8 W cm-2 or 8

x 103W m2sr–1.

Do not use optical instruments to view the laser output. The use of optical instruments to view laser

output increases eye hazard. When viewing the output optical port, power must be removed from the

network adapter.

vi Riverstone Networks RS 1000 Switch Router Getting Started Guide

SAFETY INFORMATION: WICT1-12 T1 CARD

Warning To reduce the risk of fire, use only No. 26 AWG or larger

telecommunication line cord.

CONSUMER INFORMATION AND FCC REQUIREMENTS

1. This equipment complies with Part 68 of the FCC rules, FCC Registration Number

6TGUSA-46505-DE-N Riverstone Networks Inc. Model WICT1-12 Made in the USA. On the

DS1/E1 WAN Module of this equipment is a label that contains, among other information, the FCC

registration number and Ringer Equivalence Number (REN) for this equipment. If requested,

provide this information to your telephone company.

2. The REN is useful to determine the quantity of devices you may connect to your telephone and still

have all those devices ring when your number is called. In most, but not all areas, the sum of the

REN's of all devices should not exceed five (5.0). To be certain of the number of devices you may

connect to your line, as determined by the REN, you should call your local telephone company to

determine the maximum REN for your calling area.

3. If your DS1/E1 WAN Module causes harm to the telephone network, the Telephone Company may

discontinue your service temporarily. If possible, they will notify you in advance. But if advance

notice isn't practical, you will be notified as soon as possible. You will be advised of your right to

file a complaint with the FCC.

4. Your telephone company may make changes in its facilities, equipment, operations, or procedures

that could affect the proper operation of your equipment. If they do, you will be given advance

notice so as to give you an opportunity to maintain uninterrupted service.

5. If you experience trouble with this equipment DS1/E1 WAN Module, please contact Riverstone

Networks Inc., 5200 Great America Parkway, Santa Clara, CA 95054, 408 878-6500, for

repair/warranty information. The Telephone Company may ask you to disconnect this equipment

from the network until the problem has been corrected or you are sure that the equipment is not

malfunctioning.

6. There are no repairs that can be made by the customer to the DS1/E1 WAN Module.

7. This equipment may not be used on coin service provided by the Telephone Company. Connection

to party lines is subject to state tariffs. (Contact your state public utility commission or corporation

commission for information).

EQUIPMENT ATTACHMENT LIMITATIONS NOTICE

The Industry Canada label identifies certified equipment. This certification means that the equipment

meets the telecommunications network protective, operational and safety requirements as prescribed in

the appropriate Terminal Equipment Technical Requirements document(s). The Department does not

guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities

of the local telecommunications company. The equipment must also be installed using an acceptable

method of connection. The customer should be aware that the compliance with the above conditions may

not prevent degradation of service in some situations.

Riverstone Networks RS 1000 Switch Router Getting Started Guide vii

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any

repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility,

telephone lines and internal metallic water pipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

Caution: Users should not attempt to make connections themselves, but should contact the appropriate

electric inspection authority, or electrician, as appropriate.

NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication

of maximum number of terminals allowed to be connected to a telephone interface. The termination on an

interface may consist of any combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed 5.

viii Riverstone Networks RS 1000 Switch Router Getting Started Guide

RIVERSTONE NETWORKS, INC.

STANDARD SOFTWARE LICENSE AGREEMENT

IMPORTANT: BEFORE UTILIZING THE PRODUCT, CAREFULLY READ THIS LICENSE

AGREEMENT.

This document is a legal agreement ("Agreement") between You, the end user, and Riverstone Networks, Inc. ("Riverstone"). BY

USING THE ENCLOSED SOFTWARE PRODUCT, YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDI-

TIONS OF THIS AGREEMENT AND THE RIVERSTONE STANDARD LIMITED WARRANTY, WHICH IS INCORPO-

RATED HEREIN BY REFERENCE. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, RETURN THE

UNOPENED LICENSED MATERIALS, ALONG WITH THE HARDWARE PURCHASED IF PROVIDED ON SUCH HARD-

WARE, AND PROOF OF PAYMENT TO RIVERSTONE OR YOUR DEALER, IF ANY, WITHIN THIRTY (30) DAYS FROM

THE DATE OF PURCHASE FOR A FULL REFUND.

The parties further agree that this Agreement is between You and Riverstone, and creates no obligations to You on the part of Riv-

erstone's affiliates, subcontractors, or suppliers. You expressly relinquish any rights as a third party beneficiary to any agreements

between Riverstone and such parties, and waive any and all rights or claims against any such third party.

1. GRANTOF SOFTWARE LICENSE. Subject to the terms and conditions of this Agreement, Riverstone grants You the right

on a non-exclusive, basis for internal purposes only and only as expressly permitted by this Agreement

a. to use the enclosed software program (the "Licensed Software") in object code form on a single processing unit owned or

leased by You or otherwise use the software as embedded in equipment provided by Riverstone;

b. to use the Licensed Software on any replacement for that processing unit or equipment;

c. to use any related documentation (collectively with the Licensed Software the "Licensed Materials"), provided that You

may not copy the documentation;

d. to make copies of the Licensed Software in only the amount necessary for backup or archival purposes, or to replace a

defective copy; provided that You (i) have not more than two (2) total copies of the Licensed Software including the

original media without Riverstone's prior written consent, (ii) You operate no more than one copy of the Licensed

Software, (iii) and You retain all copyright, trademark and other proprietary notices on the copy.

2. RESTRICTION AGAINST COPYING OR MODIFYING LICENSED MATERIALS. All rights not expressly granted

herein are reserved by Riverstone or its suppliers or licensors. Without limiting the foregoing, You agree

a. to maintain appropriate records of the location of the original media and all copies of the Licensed Software, in whole or

in part, made by You;

b. not to use, copy or modify the Licensed Materials, in whole or in part, except as expressly provided in this Agreement;

c. not to decompile, disassemble, electronically transfer, or reverse engineer the Licensed Software, or to translate the

Licensed Software into another computer language; provided that, if You are located within a Member State of the

European community, then such activities shall be permitted solely to the extent, if any, permitted under Article 6 of the

Council Directive of 14 May 1991 on the legal protection of computer programs, and implementing legislations

thereunder.

3. TERM AND TRANSFER. You may transfer the License Materials with a copy of this Agreement to another party only on

a permanent basis in connection with the transfer to the same party of the equipment on which it is used, and only if the other

party accepts the terms and conditions of this Agreement. Upon such transfer, You must transfer all accompanying written

materials, and either transfer or destroy all copies of the Software. Any attempted transfer not permitted by this Agreement is

void. You may not lease or rent the License Materials. This Agreement is effective until terminated. You may terminate the

Agreement at any time by destroying or purging all copies of the Licensed Materials. This Agreement will terminate

automatically without notice from Riverstone if You fail to comply with any provision of this Agreement. Upon such

termination, You must destroy the Licensed Materials as set forth above. Sections 4, 5, 6, 7, 8, 9, and 10 shall survive

termination of this Agreement for any reason.

4. TITLE AND PROPRIETARY RIGHTS.

(a) The Licensed Materials are copyrighted works and/or trade secrets of Riverstone and are the sole and exclusive property

of Riverstone, any company or a division thereof which Riverstone controls or is controlled by, or which may result from

the merger or consolidation with Riverstone (its "Affiliates"), and/or their suppliers. This Agreement conveys a limited

right to operate the Licensed Materials and shall not be construed to convey title to the Licensed Materials to You.

(b) You acknowledge that in the event of a breach of this Agreement, Riverstone shall suffer severe and irreparable damages

for which monetary compensation alone will be inadequate. You agree that in the event of a breach of this Agreement,

Riverstoneshall be entitled to monetary damages and its reasonable attorney's fees and costs in enforcing this Agreement,

as well as injunctive relief to restrain such breach, in addition to any other remedies available to Riverstone.

Riverstone Networks RS 1000 Switch Router Getting Started Guide ix

5. MAINTENANCE AND UPDATES. Updates, upgrades, bug fixes, and maintenance and support services, if any, are

provided to You pursuant to the terms of a Riverstone Service and Maintenance Agreement, and only if Riverstone and You

enter into such an agreement. Except as specifically set forth in such agreement, Riverstone is under no obligation to provide

any updates, upgrades, patches, bug fixes, modifications, enhancements, or maintenance or support services to You.

Notwithstanding the foregoing, if you are provided or obtain any software or documentation of Riverstone, which is not

otherwise provided under a license from Riverstone, then Your use of such materials shall be subject to the terms of this

Riverstone Networks, Inc. Software License Agreement.

6. EXPORT REQUIREMENTS. Licensed Software, including technical data, is subject to U.S. export controllaws, including

the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other

countries. You agree to comply strictly with all such regulations and acknowledge that you have the responsibility to obtain

licenses to export, re-export or import Licensed Materials.

7. UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Licensed Materials are provided with RESTRICTED

RIGHTS. Use, duplication or disclosure of the Licensed Materials and accompanying documentation by the U.S. Government

is subject to restrictions as set forth in this Agreement and as provided in DFARS 227.7202-1(a) and 227.7202-3(a) (1995),

DRAS 252.227-7013(c)(ii) (OCT 1988), FAR 12.212(a)(1995), FAR 52.227-19, or FAR 52.227-14 (ALT III), as applicable.

Riverstone Networks, Inc.

8. LIMITED WARRANTY. The sole warranty provided under this Agreement and with respect to the Licensed Materials is set

forth in Riverstone's Standard Limited Warranty, which is incorporated herein by reference. THE RIVERSTONE

STANDARD LIMITED WARRANTY CONTAINS IMPORTANT LIMITS ON YOUR WARRANTY RIGHTS. THE

WARRANTIES AND LIABILITIES SET FORTH IN THE STANDARD LIMITED WARRANTY ARE EXCLUSIVE AND

ESTABLISH RIVERSTONE'S ONLY OBLIGATIONS AND YOUR SOLE RIGHTS WITH RESPECT TO THE LICENSED

MATERIALS AND THIS AGREEMENT. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND

WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, NONINFRINGEMENT

OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE

EXTENT ALLOWED BY APPLICABLE LAW.

9. LIMITATION OF LIABILITY. Your exclusive remedy for any claim in connection with the Licensed Materials and the

entire liability of Riverstone are set forth in the Riverstone Standard Limited Warranty. Except to the extent provided there, if

any, IN NO EVENT WILL RIVERSTONE OR ITS AFFILIATES OR SUPPLIERS BE LIABLE FOR ANY LOSS OF USE,

INTERRUPTION OF BUSINESS, LOST PROFITS OR LOST DATA, OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES OF ANY KIND, REGARDLESS OF THE FORM OF ACTION, WHETHER IN

CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN IF RIVERSTONE OR

ITS AFFILIATE OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE, AND WHETHER

OR NOT ANY REMEDY PROVIDED SHOULD FAIL OF ITS ESSENTIAL PURPOSE. THE TOTAL CUMULATIVE

LIABILITY TO YOU, FROM ALL CAUSES OF ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO

AND WILL NOT EXCEED THE PURCHASE PRICE OF THE LICENSED MATERIALS PAID BY YOU. YOU

ACKNOWLEDGE THAT THE AMOUNT PAID FOR THE LICENSED MATERIALS REFLECTS THIS ALLOCATION

OF RISK.

10. GENERAL. The provisions of the Agreement are severable and if any one or more of the provisions hereof are illegal or

otherwise unenforceable, in whole or in part, the remaining provisions of this Agreement shall nevertheless be binding on and

enforceable by and between the parties hereto. Riverstone's waiver of any right shall not constitute waiver of that right in

future. This Agreement (including the documents it incorporates) constitutes the entire understanding between the parties with

respect to the subject matter hereof, andall prior agreements, representations, statements and undertakings, oral or written, are

hereby expressly superseded and canceled. No purchase order shall supersede this Agreement. The rights and obligations of

the parties to this Agreementshall be governed and construed in accordance with the laws ofthe State of California, excluding

the UN Convention on Contracts for the International Sale of Goods and that body of law known as conflicts of laws. Any

dispute in connection with the Licensed Materials will be resolved in state or federal courts located in Santa Clara County,

California, U.S.A.. You consent to the personal jurisdiction of and waive any objections to venue in such courts.

x Riverstone Networks RS 1000 Switch Router Getting Started Guide

STANDARD LIMITED WARRANTY

Limited Warranty

Riverstone Networks, Inc. (“Riverstone”) warrants that for a period of one (1) year from the date of shipment from

Riverstone that the Riverstone hardware purchased by Customer (“Hardware”) will be free from defects in materials

and workmanship under normal use. This limited warranty extends only to Customer as original purchaser. Cus-

tomer’s sole and exclusive remedy and the entire liability of Riverstone, its suppliers and affiliates under this war-

ranty is, at Riverstone’s option, either (i) repair of the Hardware, (ii) replacement of the Hardware, or (iii) refund of

the purchase price of the Hardware (as evidenced by a copy of Customer’s purchase receipt), less any rebates or cred-

its.

Riverstone warrants that for a period of one (1) year from the date of shipment from Riverstone that the media on

which the Riverstone software purchased by Customer (“Software”) is furnished will be free from defects in materi-

als and workmanship under normal use. This limited warranty extends only to Customer as original licensee. Cus-

tomer’s sole and exclusive remedy and the entire liability of Riverstone, its suppliers and affiliates under this

warranty is replacement of the media on which the Software is furnished. Riverstone makes no warranty with respect

to the Software, and specifically disclaims any warranty that the Software is error free or that Customer will be able

to operate the Software without problems or interruptions.

Restrictions. No warranty will apply if the Hardware and/or Software (collectively, “Product”) (i) has been altered,

except by Riverstone; (ii) has not been installed, operated, repaired, or maintained in accordance with instructions

supplied by Riverstone; or (iii) has been subjected to abnormal physical, thermal or electrical stress, misuse, negli-

gence, or accident. In addition, Products are not designed or intended for use in (i) the design, construction, operation

or maintenance of any nuclear facility, (ii) navigating or operating aircraft; or (iii) operating life-support or life-criti-

cal medical equipment, and Riverstone disclaims any express or implied warranty of fitness for such uses.

Warranty Service Procedures

Customer must notify Riverstone of any defect in the Product within the applicable warranty period and provide

dated proof of original purchase prior to the return of any defective Product. Within ten (10) business days of the date

of notification, Riverstone will provide Customer with a Return Material Authorization (“RMA”) number and the

location to which Customer must return the defective Product. Customer is responsible for proper packaging of Prod-

uct returned to Riverstone, including description of the failure, shipment to Riverstone’s designated location, and

return of Product within ten (10) days after issuance of the RMA number. In no event will Riverstone accept any

returned Product which does not have a valid RMA number. Customer’s failure to return Product within thirty (30)

days of its receipt of an RMA may result in cancellation of the RMA and/or the charge of the list price of any

advanced replacement product. Riverstone does not accept responsibility for any Product lost in transit and recom-

mends that the return be insured for the full value. Riverstone will use all reasonable efforts within thirty (30) days of

receipt of defective Product to repair or replace such Product or refund Customer’s purchase price.

Transportation costs relating to warranty service and any applicable duties will be borne by Customer. If a warranty

claim is invalid for any reason, Customer will be charged at Riverstone’s then-current standard rates for services per-

formed and will be charged for all expenses incurred by Riverstone.

Replacement Products or replacement parts used in the repair of Products may be new or reconditioned.

Riverstone shall not be responsible for Customer’s or any third party’s software, firmware, information, or memory

Riverstone Networks RS 1000 Switch Router Getting Started Guide xi

data contained in, sorted on, or integrated with any Product returned to Riverstone, whether under warranty or not.

Customer is responsible for backing up its programs and data to protect against loss or corruption.

Disclaimer. EXCEPT AS SPECIFIED ABOVE, ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTA-

TIONS AND WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OR CON-

DITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY,

NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE, ARE

HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW.

Limitation of Liability. IN NO EVENT WILL RIVERSTONE OR ITS AFFILIATES OR SUPPLIERS BE LIABLE

FOR ANY LOSS OF USE, INTERRUPTION OF BUSINESS, LOST PROFITS, OR LOST DATA, OR INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OF ANY KIND REGARDLESS OF THE FORM

OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTH-

ERWISE, EVEN IF RIVERSTONE OR ITS AFFILIATE OR SUPPLIER HAS BEEN ADVISED OF THE POSSI-

BILITY OF SUCH DAMAGE, AND WHETHER OR NOT ANY REMEDY PROVIDED SHOULD FAIL OF ITS

ESSENTIAL PURPOSE. THE TOTAL CUMULATIVE LIABILITY TO CUSTOMER, FROM ALL CAUSES OF

ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO AND WILL NOT EXCEED THE PUR-

CHASE PRICE OF THE PRODUCT PAID BY CUSTOMER.

xii Riverstone Networks RS 1000 Switch Router Getting Started Guide

DECLARATION OF CONFORMITY ADDENDUM

Application of Council Directive(s) 89/336/EEC

73/23/EEC

Manufacturer’s Name Riverstone Networks, Inc.

Manufacturer’s Address 5200 Great America Parkway

Santa Clara, CA 95054

Conformance to Directive(s)/Product

Standards

EC Directive 89/336/EEC

EC Directive 73/23/EEC

EN 55022

EN 50082-1

EN 60950

Equipment Type/Environment Networking equipment for use in a commercial

or light-industrial environment

Riverstone Networks RS 1000 Switch Router Getting Started Guide xiii

TABLE OF CONTENTS

1 About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.1 How to Use This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.2 Related Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

2 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1 Functional Layer Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.3 Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.3.1 Bridging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.3.2 Port and Protocol VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.3.3 Routing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.3.4 Layer-4 Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

2.3.5 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

2.3.6 Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

2.3.7 Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

2.3.8 Web Hosting Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

2.3.9 Management Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

2.4 Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

2.4.1 Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

2.4.2 Motherboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

2.4.3 Power Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

2.4.4 Line Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

3 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1 Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1.1 Preventing Injury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1.2 Preventing Equipment Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.2 Hardware Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.3 Installing the Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.3.1 Verifying Your Shipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.3.2 Installing Line Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

3.3.3 Multi-rate WAN Line Card and WICs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

3.3.4 Installing the RS 1000 into an Equipment Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

3.3.5 Management Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

4 Initial Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

4.1 Powering on the RS 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

4.2 Starting the Command Line Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

4.2.1 CLI Access Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

xiv Riverstone Networks RS 1000 Switch Router Getting Started Guide

4.2.2 Basic Line Editing Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

4.3 Configuration Changes and Saving the Configuration File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

4.3.1 Activating the Configuration Commands in the Scratchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

4.3.2 Saving the Active Configuration to the Startup Configuration File. . . . . . . . . . . . . . . . . . . . . . . .4-7

4.3.3 Viewing the Current Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8

4.4 Setting the Basic System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9

4.5 Setting Up Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12

4.5.1 If You Forget Your Passwords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-13

4.6 Setting Up SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-15

4.6.1 Setting the Community string. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-15

4.6.2 Improving SNMP Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16

4.6.3 Supported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17

4.7 Setting the DNS Domain Name and Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-18

4.8 Setting the SYSLOG Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20

5 Managing Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

5.1 Upgrading System Image Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

5.2 Upgrading Boot PROM Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3

5.3 Loading Software from the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

5.3.1 Loading Image Software from a TFTP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

5.3.2 Loading Image Software from a BootP/TFTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-1

Riverstone Networks RS 1000 Switch Router Getting Started Guide xv

LIST OF FIGURES

Figure 2-1 Front panel of a RS 1000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Figure 2-2 AC power supply power backside with power cord socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Figure 2-3 DC power supply back side with wiring block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Figure 2-4 100BASE-FX line card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Figure 2-5 1000BASE-SX line card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Figure 2-6 1000BASE-LX line card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Figure 2-7 1000BASE-LH line card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Figure 2-8 Front panel of Dual Serial WAN line card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Figure 2-9 Front panel of Quad Serial –C/CE WAN line card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Figure 2-10 LFH-60 high density connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Figure 2-11 Front panel of Dual HSSI WAN line card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Figure 2-12 50-pin HSSI connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21

Figure 2-13 Multi-Rate WAN line card with one T1 WIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

Figure 2-14 T1 and E1 WICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

Figure 2-15 Clear Channel T3 and E3 WICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

Figure 2-16 Front panel of 10/100Base-TX line card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

Figure 3-1 Removing the RS 1000’s cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Figure 3-2 Removing the cover plate (view from outside chassis). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Figure 3-3 Installing “standard”line card face plate (view from inside chassis) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Figure 3-4 “Extended”EMI face plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Figure 3-5 Installing the extended EMI face plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Figure 3-6 Installing a line card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Figure 3-7 Jumper position on Clear Channel T3 and E3 WICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Figure 3-8 Removing the stand-offs on the motherboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Figure 3-9 Installing a WIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Figure 3-10 Installing the RS 1000 chassis in an equipment rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Figure 3-11 RS 1000’s serial (DB-9 DCE) management port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Figure 3-12 Serial port (DB-9 DCE) pin-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Figure 3-13 RS 1000’s 10/100BASE-TX management port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Figure 3-14 10/100BASE-TX RJ-45 port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

xvi Riverstone Networks RS 1000 Switch Router Getting Started Guide

Riverstone Networks RS 1000 Switch Router Getting Started Guide xvii

LIST OF TABLES

Table 2-1 ISO 7-layer model and RS 1000 capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Table 2-2 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Table 2-3 RS 1000 Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Table 2-4 AC power supply specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Table 2-5 DC power supply specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Table 2-6 100BASE-FX line card specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Table 2-7 100BASE-FX line card LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Table 2-8 1000BASE-SX line card specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Table 2-9 1000BASE-SX line card LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Table 2-10 1000BASE-LX line card specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Table 2-11 1000BASE-LX line card LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Table 2-12 1000BASE-LH line card specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Table 2-13 1000BASE-LH line card LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Table 2-14 Dual Serial and Quad Serial –C/CE WAN line card specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Table 2-15 Dual Serial port to CSU/DSU cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Table 2-16 LFH-60 connector pin assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Table 2-17 Dual Serial and Quad Serial –C/CE WAN line card LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Table 2-18 Dual HSSI line card specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Table 2-19 Pin assignments for the HSSI connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21

Table 2-20 Dual HSSI line card LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

Table 2-21 Specifications for T1 WIC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

Table 2-22 Specifications for E1 WIC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

Table 2-23 Specifications for Clear Channel T3 WIC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

Table 2-24 Specifications for Clear Channel E3 WIC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Table 2-25 Pin assignments for T1 and E1 WICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Table 2-26 LEDs for Multi-rate WAN line card and WICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

Table 2-27 10/100Base-TX line card specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

Table 2-28 10/100Base-TX line card LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

Table 3-1 RS 1000 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Table 3-2 Jumper default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Table 3-3 Wiring map for serial cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Table 3-4 Wiring map for MDI management cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Table 4-1 CLI access modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Table 4-2 Common CLI line editing commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

xviii Riverstone Networks RS 1000 Switch Router Getting Started Guide

Table 4-3 Configuration file contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

Table 4-4 Supported MIBs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17

Table 4-5 Types of SYSLOG messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20

Table 4-6 Examples of message types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20

Table A-1 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1