Rocam Technology NC400HD User manual

2013 年11 月01 日
IP Camera NC400HD User Manual
Version 1.0

2013 年11 月01 日
Catalogue
Chapter 1：Introduce
1.1 Product Introduce
1.2 Product Applications
1.3 Environmental Requirements
Chapter 2：Function Introduce
2.1 Basic Function Introduce
2.2 Advanced Function Introduce
Chapter 3：IP Camera Installation Wizard
Chapter 4：Detailed Interface Introduce
4.1 Login Interface
4.2 Login Interface Options
4.3 Monitoring Interface
4.4 Interface Settings
4.4.1 Network Setting
4.4.2 Alarm Setting
4.4.3 System Setting
Chapter 5：The Use of IP Camera
5.1 Monitor、Talkback
5.2 Photograph、Video
5.3 Setting、Call Preset
5.4 Motion Detection Arming
Chapter 6：FAQ
Chapter 7：Port Mapping

2013 年11 月01 日
Chapter 1：Introduce
1.1 Product Introduce
This product is one of integrated IP camera developed for network
video surveillance. Using high-performance chip makes the media
processor that can integrate audio and video capture, compression,
transmission all-in-one. H.264 encoding algorithm ensures a clearer,
smoother video transmission. Allow users through the IE and other
browsers/centralized monitoring terminal and system platform to real-time
monitor and remote control the front of camera easily. The product has
good reliability and compatibility. Easy to install, easy to operate features
make users do not need any skills can connect the camera to the
broadband internet in a few minutes.
1.2 Product Applications
IP Cameras can usually be used in large stores, schools, factories, and
a series of public places. High-end IP cameras because of its powerful
image processing capabilities more suitable for banks, traffic junctions
that require a higher resolution image environment.
1.3 Environmental Requirements
Software Environment
IE 5.0 or above version
DirectX8.0 above version
TCP／IP protocols
Minimum Hardware Configuration
CPU: Pentium 1.6 GHz
Memory: 256MB

2013 年11 月01 日
Sound Card: Needed voice monitor、Tow-way intercom
necessary
Hard Disk: If you need to record images, should not be less than
40GB
Operating System:32, 64-bit Windows2000、Windows XP、
Windows2003、Windows Vista and other operating
systems.
Chapter 2：Function Introduce
2.1 Basic Function Introduce
IP Cameras are mainly used for remote video image transmission
based on IP networks. Products using JPEG hardware compression
technology can transmit quality (HD or VGA) real-time video images at 30
frames/second on the LAN/WAN. IP Camera completely built on open
using TCP/IP standard protocols, built-in WEB server, and support IE
browser.，Product can be configured, started or firmware upgraded
remotely over the network, equipment management and maintenance is
very convenient. At any time and any place, you can easily by clicking on
the network to monitor, control and zoom images.
2.2 Advanced Function Introduce
Using high performance, powerful media processor 32BitRSIC
High-resolution CMOS sensor chip, up to 30 frames per second in
real time
Optimized Motion-JPEG video compression algorithm to achieve
the narrow-band high-definition image transmission.
Supports up to four users to simultaneously browse, if you use the
forwarding server function there is no limited.

2013 年11 月01 日
Built-in Web Server, users can achieve real time monitoring and
setting management via standard browser.
Support WIFI 802.11b/g/n wireless network
Support remote system upgrading
DDNS support, support for LAN and internet (dial-up Internet
access, Internet routers, etc.)
Support single/two-way voice intercom
Motion detection alarm function, can set the sensitivity
Dynamic alarm function, can set the alarm time
Support E-mail sent, FTP pictures, external output function
Support the mobile access
Specifications
Category
Type
Parameters
System
Operation system
Embedded Linux
System Security
3 levels user rights management:
Online Users
Support 4 users simultaneously view online
DDNS
Comes with DDNS
Night Vision
Image sensor
1/4inch 1.3MegaPixel Progressive CMOS sensor
Sensor Performance
SupportAWB,AGC,AE
Sensor size
3.888mm×2.430mm
SNR
≥39dB
Minimum
Illumination
0.1Lux/F1.2（color mode）,0.01Lux/F1.2（B&W mode）
Lens
4.2mm/F2.0
Night Vision
11pcs 850nmΦ5mm IR LED: IR irradiation distance up to10m
Video
Encode format
H.264 Basline Profile@Level 1-4.1
Resolution
720P/VGA/QVGA
Image adjustment
Brightness and Contrast can be adjusted
Audio
Input
1 Channel built-in Microphone
Output
1 Channel Line output

2013 年11 月01 日
Sampling
frequency/Bit wide
8KHz/16bit
Encode format/Rate
32kbps/ADPCM
Network
Network Interface
10Base-T / 100Base-TX, RJ45 interface
Protocols
TCP/IP,HTTP,TCP,UDP,SMTP,FTP,DHCP,DNS,DDNS,NTP,UPnP,
RTSP,PPPoE, P2P etc.
Wireless Network
WiFi802.11b/g/n
Alarm
Alarm Detection
Support Motion detection/1 Channel input trigger
AlarmActions
1 way output / E-mail pictures / upload video by FTP /
messages alarm(coordinate to server)
Physical
Instructions
Nominal Voltage
DC5±0.3V
Power consumption
Rated power:3.5W(IR LED turn on)/Max:7W(P&T turn on)
Working
Environment
Temperature:-10～70℃,humidity:10～90%non-condensing
Weight
0.6KG
Package Size
200×120×180mm(L×W×H)
Chapter 4：Detailed Interface Introduce
4.1 Login Interface
To verify the current user permissions prompt box, need to enter the
correct user name and password to enter the camera. You can find the
default user name and password in the bottom of the device.

2013 年11 月01 日
4.2 Login Interface Options
Product support IE、Firefox、Safari、google and other major
browses/iPhone 、iPad and other IOS devices and smart mobile browse.
According to your current way of opening the device to select the
corresponding entrance to entry into interface. Wrong choice may
prevent the entrance normal viewing screen.
4.3 Monitor Interface

2013 年11 月01 日
The camera will Left-right cruising automatically after select on, it will
cruising about 1 hours if no manual stopped.Infrared light will be start
work automatically in low-light condition. The number larger,the speed
faster. Infrared light turn off in low-light condition. Image inversion: In
selected, the image displaying will be upside down.Mirror image mode: In
Selected, the displayed image will reversed left to right.
Turn on the alarm terminal
Turn off the alarm terminal
Multiple screens setting
Preset positions setting
The first is a single screen, the second of four, the third of nine; IE browser
supports up to 9 screens simultaneously watch
Preset settings can set up to 15 preset positions .
Setting process:Set the preset position first, then select to use.
Audio(Listening and speaking)/Setting
1) Voice monitor:The voice around of the camera could be heard in turn-on
condition.
2) Two way radio: Use the microphone on computer do a conversation
with camera.
3) The video to the local: In selected ,Camera start to record, the videos
will be stored in your own terminal equipment.
4) Parameter settings: Click into the IE settings interface.
4.4 Setting interface

2013 年11 月01 日
4.4.1 Network setting
Basic network setting
Support DHCP Dynamic IP and Static IP. Use Static IP If you need set the
router port mapping. Do not modify above parameters arbitrarily without
certain levels computer network support.
Wireless LAN setting
Below set figure for wireless networking,where the security mode
support :WEP、WPA Personal（TKIP）、 WPA Personal（AES）、
WPA2Personal（AES）、 WAP2 （TKIP+AES）five ways.,the camera will
automatically match the wireless network encryption.Selected wireless
network name that you want to add, input password click the “setting”
button, unplug the network cable follow the page guides , it will be connect
after the camera restart.
The reason you can not connect the wireless camera are the following：

2013 年11 月01 日
1) When using the scan button,the camera if you can search the wireless
signal to the router?
2) SSID is consistent with the wireless router's SSID?
3) There is a special character of Wireless SSID and password or not,
change it if yes.
4) Whether to open the wireless mac address filtering?
5) Whether to open the ARP binding ?(camera wireless and wired LAN is
two mac address, the same IP).
6) Camera distance is not too far from the router?(Under normal indoor
environment, try to stay within 20 meters).
7) Whether the antennal of the camera be tightened?
Setting:
Full name is Universal Plug and Play,Popular speaking ,it’s automatic
port mapping. Users To use this feature, you need the router supports UPnP
function and turned on,select this button.
DDNS Settings:
The factory default is enabled manufacturers domain name, without setting
a third party DDNS service can be directly accessed using the domain
name manufacturers, third-party DDNS service support DynDns,
3322,9299, etc.
Please check the following points if default domain can not be connected:
1) The parameters of cameras is correct or not , you can use network
camera installation wizard do one key setting if you don’t know how to set.
2) Whether the DNS address is correct .then you can check whether your