Rogers Day/Night HD Camera User manual

Day/Night HD Camera
Manufacturer's Installation Guide

2 Smart Home Monitoring | Day/Night HD Camera | Manufacturer's Installation Guide
Package Contents
The following items should be included in the package: If any of these items are
damaged or missing, please contact your dealer immediately.
1. The Day/Night HD Camera Unit
2. Stand * 1
3. Y-cable * 1
4. DC cable * 1
5. Ethernet cable * 1
6. RJ45 cap * 1
7. 12V 1A Power Adapter * 1

3 Smart Home Monitoring | Day/Night HD Camera | Manufacturer's Installation Guide
Physical Installation
1. Move the Day/Night HD Camera to where it is to be placed.
2. Connect the Ethernet cable to the LAN port of the Day/Night HD Camera.
3. Connect the DC cable to the Ethernet cable.
4. Connect the supplied power adapter to the DC cable to power up the Day/Night
HD Camera.
CAUTION: Use only the power adapter provided. Using a dierent one may lead to
hardware damage.
5. Check the LEDs:
›The Power LED should come on briefly, then start to blink. It will blink during
startup, which takes 15 to 20 seconds. The Power LED will turn to solid on when
the startup process is complete.
›The Network LED should be ON.

4 Smart Home Monitoring | Day/Night HD Camera | Manufacturer's Installation Guide
Wall Mounting
Note: Please ensure that the Day/Night HD Camera
is configured and added to the network before
permanent mounting.
1. Using hands to remove the plate from the
bottom of the stand.
2. Place the plate in the desired position of the
wall. Screw three screws into ceiling through
the holes of the plate.
3. Attach the stand to the plate.
4. Connect the LAN cable into the LAN port of the
device. Turn the Day/Night HD Camera
clockwise to attach it to the stand.
5. Connect the other end of the LAN cable to the
adapter through the holes of the stand. Adjust
it to the desired position and secure the Day/
Night HD Camera firmly.

5 Smart Home Monitoring | Day/Night HD Camera | Manufacturer's Installation Guide
Outdoor Installation
Weather-proof is required for outdoor applications.
Please follow the procedure to achieve weather-proof
installation.
1. Follow steps 1 to 3 of Wall Mounting to mount
the camera stand to a desire location.
2. Pull the cable through the weather-proof
sealing cap.
3. Screw/attach the Day/Night HD Camera onto
the camera stand.
4. Connect one end of the Ethernet cable to the
LAN port of the Day/Night HD Camera and the
other end to the DC cable.
5. Connect the DC cable to the power adapter.
CAUTION: Use only the power adapter provided.
Using a dierent one may lead to hardware damage.
6. Plug the power adapter into a wall outlet to
power up the camera.
7. Adjust the Day/Night HD Camera to a desired
position and secure it firmly.